About the selection of the legal coil wireThe sound characteristics of a coil are not only determined by the coil core and the manufacturing quality but also by the wire type used. In order to be able to offer you the right coil for each application, we use three types of wires made of three materials of highest purity.
Coils that use oxygen-free copper (99.997% purity) as conductor material are characterised by a harmonic, stereophonic reproduction of music, rich in detail and an excellent price/performance ratio.
Due to their ability to reproduce voices and instruments in a more dynamic, detailed, spatial manner and with more timbres compared to copper coils, silver coils of highest purity (type 99.99%) are highly appreciated and preferred by a number of audio enthusiasts.
99% silver + 1% gold = 100% music. This does not only add up for capacitors such as the MCap® SUPREME SilverGold.Oil and audio cables, but also for coils. The high-purity gold (type 99.99%) changes the crystalline structure of silver and maximises its very good electric conductivity. Instruments and voices unfold their full range of timbres and their character is illuminated and becomes perceivable in all shades. On the one hand `crystal clear,´ the reproduction is at the same time vibrant and warm, embedded in a finely differentiated, location-true image. Purity and fine elegance combined with a vibrant character distinguish this exquisite material from all others!
The reproduction of music by coils made of solid round wires (also referred to as SolidCore) excels by natural vibrancy and fineness as well as highest tonal neutrality. Another benefit of round wire coils are their highly compact dimensions. Like all Mundorf coils, they are wound and mounted by hand with highest accuracy and precision using special machines in Germany.
OFC standard is the most cost-efficient, audio-compatible coil wire and available in diameters from 0.50 to 3.90mm. Coils made of this material, however, do not have an additional coil fixation and thus have a disadvantage with respect to sound compared to all other coil types manufactured by Mundorf: This is because electric current passing through a coil will always cause a vibration of the entire winding. Due to the microphonic effect (the conversion of mechanical oscillations to electric oscillations) these mechanical oscillations are added to the original signal as additional information. This results in an interference with and an alienation of the details of the original signal. On the one hand, this results in a loss of spatial quality and transparency of the music and on the other hand in an increase of distortions and tonal discolorations of the signal. This physically induced unwanted effect, however, can be eliminated completely by the use of baked varnish wire or by means of vacuum impregnation.
Baked varnish coils have a special, solid OFC round wire with an additional layer of varnish. After the coil has been wound, it is heated up by means of an electric impulse causing the additional layer to melt. When cooling down, the individual windings are firmly bonded together by the baked varnish and are thus prevented from vibrating and the original signal remains uncorrupted. Unfortunately, self-bonding wires are only available in diameters from 0.50 to 1.40mm. Vacuum impregnation is another procedure, equally effective as heat bonding, which we offer for coils with larger wire diameters (2.00 to 3.90mm). In vacuum impregnation, the coil is first impregnated with a special lacquer up to the innermost windings under vacuum. Subsequently, the impregnated coil is dried at 130° Celsius. Thus the whole coil is baked into a very solid unit.
Vacuum impregnation is another procedure, equally effective as heat bonding, which we offer for coils with larger wire diameters (2.00 to 3.90mm). In vacuum impregnation, the coil is first impregnated with a special lacquer up to the innermost windings under vacuum. Subsequently, the impregnated coil is dried at 130° Celsius. Thus the whole coil is baked into a very solid unit.
The use of a strand of seven individually isolated OFC self-bonding wires gives the reproduction of music a fine, smooth, harmonic character, which is rich in detail at the same time. These acoustic characteristics are praised and appreciated by our customers, in particular when it comes to the musical 'cultivation' of speaker chassis with a tendency to tonal sharpness or hardness without having a negative impact on qualities such as brilliance and richness in detail.
The character is mainly formed by the use of round wires as single conductors and their special stranding. The baked winding and the reinforced PA coil body together form a winding unit of highest mechanical stability and tranquillity. Distortions and discolorations of the music signal are thus largely eliminated. In addition, the large surface of the seven-fold strand improves the effective conductivity for higher-frequent AC (skin effect). Our 7 x 0.6mm strand corresponds to a round wire diameter of approx. 1.60mm.
The reproduction of music by coils made of solid metal foil (also referred to as ribbon coils) excels by extraordinary dynamics, unparalleled detail and holographic spatial quality and lowest distortions and discolorations - Even finest nuances are represented in a realistic manner. Mundorf foil coils have thus become an integral part of many top-class audiophile products.
With its individual coils wound on each other, the foil coil corresponds to the physically ideal coil more than any other design. This is for example reflected in the quality of the coil which remains constant up to beyond 100 kilohertz. Furthermore, these coils are particularly low-capacitive, even though the similarity to a wound capacitor suggests the opposite so that even very high frequencies are isolated effectively. In addition, the large surface of the metal film improves the effective conductivity for higher-frequency alternating current (skin effect).
Another remarkable feature is the high mechanical stability of these types, which are carefully baked by hand: Due to the large contact surface between the individual windings and the viscoplastic isolation of the polyprobylene foil the oscillations of the individual windings are eliminated effectively. These advantages can be seen clearly in the diagram shown below: Foil coils have the lowest measured vibrations. We offer copper foils in widths corresponding to round wire diameters of approx. 1.25mm · 1.60mm · 2.00 and 2.50mm.