P71-3,9
Ferrite tube-core coil based on the high-performance ferrite HP3616 for compact and precise small-signal applications. The P-core design offers higher current reserves and a later saturation onset than comparable H-core ferrite coils, with a slightly higher RDC.
Technologies
Characterized by a purity of at least 99.995% copper
OFC Copper
- Purity: at least 99.995% Cu, often 99.999% (4N) or higher
- Feature: almost oxygen-free (typically <10 ppm)
- Result: more stable grain boundaries, less oxide formation, more uniform electron flow
Maximum power and dynamic reserve due to very late, gentle saturation. Ideal for demanding bass and fundamental tone branches.
P-Core
The P-core is maximally open magnetically and therefore offers very late, soft saturation with a high reserve under load. More copper is required for the same inductance, which is why the RDC is typically higher than with the H-Core.
It is precisely this exchange that is intended: more goodness and level stability instead of minimal DC resistance. P-Core coils are particularly strong when high currents and dynamic levels are to be safely processed.
They are typically used in bass and root tone applications.
A solid conductor is formed into a winding and provides an easily calculable inductance.
Round Wire
Round wire coils are the tried and tested standard design: A solid conductor is formed into a winding and provides an easily calculable inductance. In terms of sound, DC resistance (RDC) is decisive here because it directly influences efficiency and control — especially in the bass range.
Our precision material for low-signal applications: fast, clean and very compact.
Ferrite HP3616
HP3616 is our precision material for low-signal applications: fast, clean and very compact. Particularly in correction links, equalizers and selected midrange tasks, he shows his strength in clarity and definition.
The design is decisive for high currents in the bass, as the magnetization reserves are limited.
Make sure that the left and right channels work identically, important for stable stage and positioning.
Tight Tolerances
Tight tolerances in capacitance, inductance, and resistance ensure that capacitors of one type are very close together in terms of their electrical properties. In crossovers, the left and right channels therefore work virtually identically: crossover frequencies, level ratios and phase positions match closely. This is the basis for stable, precise stereo imaging and reproducible results — in series production and also after service.
Tonal Effects
- precise, stable soundstage without drifting
- Coherent overall impression: left and right channels fuse into a single, seamless whole
- characteristic sound is reliably retained even after component replacement/repair
- More stable virtual center and clearer spatial layering
Technical data
Similar configurations
1 VARIANTS
We are happy to advise you
Whether ideal components, technical know-how or individual solutions. Let us find the best solution for your application together!
For industrial customers
Order free samples
Would you like to test our products in yours? As a business customer, you can request free samples and see the quality and design for yourself.
NEWSLETTER
News and tips straight to your inbox. Subscribe to our newsletter and choose which topics matter to you.
Our services for manufacturers and cooperation partners
We manufacture coils in-house. This gives us flexibility—from material selection and micro-series production to standard products.
Material & design
Which coil material and design are best suited for your application? We provide independent advice, regardless of whether you ultimately choose a standard product or a custom solution.
Your material and parameter mix
Do you have a specific vision for the material, winding type, and electrical parameters? We can implement combinations outside of our standard range—either using our modular system or through a new development.
Custom small and micro-series
Thanks to our in-house production, we can manufacture coils in very small quantities—starting from a batch size of 1, provided it is economically viable. We can also provide approval samples before full-scale production upon request.
Similar products
OFC Copper
- Purity: at least 99.995% Cu, often 99.999% (4N) or higher
- Feature: almost oxygen-free (typically <10 ppm)
- Result: more stable grain boundaries, less oxide formation, more uniform electron flow
P-Core
The P-core is maximally open magnetically and therefore offers very late, soft saturation with a high reserve under load. More copper is required for the same inductance, which is why the RDC is typically higher than with the H-Core.
It is precisely this exchange that is intended: more goodness and level stability instead of minimal DC resistance. P-Core coils are particularly strong when high currents and dynamic levels are to be safely processed.
They are typically used in bass and root tone applications.
Round Wire
Round wire coils are the tried and tested standard design: A solid conductor is formed into a winding and provides an easily calculable inductance. In terms of sound, DC resistance (RDC) is decisive here because it directly influences efficiency and control — especially in the bass range.
Ferrite HP3616
HP3616 is our precision material for low-signal applications: fast, clean and very compact. Particularly in correction links, equalizers and selected midrange tasks, he shows his strength in clarity and definition.
The design is decisive for high currents in the bass, as the magnetization reserves are limited.
Tight Tolerances
Tight tolerances in capacitance, inductance, and resistance ensure that capacitors of one type are very close together in terms of their electrical properties. In crossovers, the left and right channels therefore work virtually identically: crossover frequencies, level ratios and phase positions match closely. This is the basis for stable, precise stereo imaging and reproducible results — in series production and also after service.
Tonal Effects
- precise, stable soundstage without drifting
- Coherent overall impression: left and right channels fuse into a single, seamless whole
- characteristic sound is reliably retained even after component replacement/repair
- More stable virtual center and clearer spatial layering
OFC Copper
- Purity: at least 99.995% Cu, often 99.999% (4N) or higher
- Feature: almost oxygen-free (typically <10 ppm)
- Result: more stable grain boundaries, less oxide formation, more uniform electron flow
P-Core
The P-core is maximally open magnetically and therefore offers very late, soft saturation with a high reserve under load. More copper is required for the same inductance, which is why the RDC is typically higher than with the H-Core.
It is precisely this exchange that is intended: more goodness and level stability instead of minimal DC resistance. P-Core coils are particularly strong when high currents and dynamic levels are to be safely processed.
They are typically used in bass and root tone applications.
Round Wire
Round wire coils are the tried and tested standard design: A solid conductor is formed into a winding and provides an easily calculable inductance. In terms of sound, DC resistance (RDC) is decisive here because it directly influences efficiency and control — especially in the bass range.
Ferrite HP3616
HP3616 is our precision material for low-signal applications: fast, clean and very compact. Particularly in correction links, equalizers and selected midrange tasks, he shows his strength in clarity and definition.
The design is decisive for high currents in the bass, as the magnetization reserves are limited.
Tight Tolerances
Tight tolerances in capacitance, inductance, and resistance ensure that capacitors of one type are very close together in terms of their electrical properties. In crossovers, the left and right channels therefore work virtually identically: crossover frequencies, level ratios and phase positions match closely. This is the basis for stable, precise stereo imaging and reproducible results — in series production and also after service.
Tonal Effects
- precise, stable soundstage without drifting
- Coherent overall impression: left and right channels fuse into a single, seamless whole
- characteristic sound is reliably retained even after component replacement/repair
- More stable virtual center and clearer spatial layering
OFC Copper
- Purity: at least 99.995% Cu, often 99.999% (4N) or higher
- Feature: almost oxygen-free (typically <10 ppm)
- Result: more stable grain boundaries, less oxide formation, more uniform electron flow
P-Core
The P-core is maximally open magnetically and therefore offers very late, soft saturation with a high reserve under load. More copper is required for the same inductance, which is why the RDC is typically higher than with the H-Core.
It is precisely this exchange that is intended: more goodness and level stability instead of minimal DC resistance. P-Core coils are particularly strong when high currents and dynamic levels are to be safely processed.
They are typically used in bass and root tone applications.
Round Wire
Round wire coils are the tried and tested standard design: A solid conductor is formed into a winding and provides an easily calculable inductance. In terms of sound, DC resistance (RDC) is decisive here because it directly influences efficiency and control — especially in the bass range.
Ferrite HP3616
HP3616 is our precision material for low-signal applications: fast, clean and very compact. Particularly in correction links, equalizers and selected midrange tasks, he shows his strength in clarity and definition.
The design is decisive for high currents in the bass, as the magnetization reserves are limited.
Tight Tolerances
Tight tolerances in capacitance, inductance, and resistance ensure that capacitors of one type are very close together in terms of their electrical properties. In crossovers, the left and right channels therefore work virtually identically: crossover frequencies, level ratios and phase positions match closely. This is the basis for stable, precise stereo imaging and reproducible results — in series production and also after service.
Tonal Effects
- precise, stable soundstage without drifting
- Coherent overall impression: left and right channels fuse into a single, seamless whole
- characteristic sound is reliably retained even after component replacement/repair
- More stable virtual center and clearer spatial layering
OFC Copper
- Purity: at least 99.995% Cu, often 99.999% (4N) or higher
- Feature: almost oxygen-free (typically <10 ppm)
- Result: more stable grain boundaries, less oxide formation, more uniform electron flow
P-Core
The P-core is maximally open magnetically and therefore offers very late, soft saturation with a high reserve under load. More copper is required for the same inductance, which is why the RDC is typically higher than with the H-Core.
It is precisely this exchange that is intended: more goodness and level stability instead of minimal DC resistance. P-Core coils are particularly strong when high currents and dynamic levels are to be safely processed.
They are typically used in bass and root tone applications.
Round Wire
Round wire coils are the tried and tested standard design: A solid conductor is formed into a winding and provides an easily calculable inductance. In terms of sound, DC resistance (RDC) is decisive here because it directly influences efficiency and control — especially in the bass range.
Ferrite HP3616
HP3616 is our precision material for low-signal applications: fast, clean and very compact. Particularly in correction links, equalizers and selected midrange tasks, he shows his strength in clarity and definition.
The design is decisive for high currents in the bass, as the magnetization reserves are limited.
Tight Tolerances
Tight tolerances in capacitance, inductance, and resistance ensure that capacitors of one type are very close together in terms of their electrical properties. In crossovers, the left and right channels therefore work virtually identically: crossover frequencies, level ratios and phase positions match closely. This is the basis for stable, precise stereo imaging and reproducible results — in series production and also after service.
Tonal Effects
- precise, stable soundstage without drifting
- Coherent overall impression: left and right channels fuse into a single, seamless whole
- characteristic sound is reliably retained even after component replacement/repair
- More stable virtual center and clearer spatial layering
OFC Copper
- Purity: at least 99.995% Cu, often 99.999% (4N) or higher
- Feature: almost oxygen-free (typically <10 ppm)
- Result: more stable grain boundaries, less oxide formation, more uniform electron flow
P-Core
The P-core is maximally open magnetically and therefore offers very late, soft saturation with a high reserve under load. More copper is required for the same inductance, which is why the RDC is typically higher than with the H-Core.
It is precisely this exchange that is intended: more goodness and level stability instead of minimal DC resistance. P-Core coils are particularly strong when high currents and dynamic levels are to be safely processed.
They are typically used in bass and root tone applications.
Round Wire
Round wire coils are the tried and tested standard design: A solid conductor is formed into a winding and provides an easily calculable inductance. In terms of sound, DC resistance (RDC) is decisive here because it directly influences efficiency and control — especially in the bass range.
Ferrite HP3616
HP3616 is our precision material for low-signal applications: fast, clean and very compact. Particularly in correction links, equalizers and selected midrange tasks, he shows his strength in clarity and definition.
The design is decisive for high currents in the bass, as the magnetization reserves are limited.
Tight Tolerances
Tight tolerances in capacitance, inductance, and resistance ensure that capacitors of one type are very close together in terms of their electrical properties. In crossovers, the left and right channels therefore work virtually identically: crossover frequencies, level ratios and phase positions match closely. This is the basis for stable, precise stereo imaging and reproducible results — in series production and also after service.
Tonal Effects
- precise, stable soundstage without drifting
- Coherent overall impression: left and right channels fuse into a single, seamless whole
- characteristic sound is reliably retained even after component replacement/repair
- More stable virtual center and clearer spatial layering
OFC Copper
- Purity: at least 99.995% Cu, often 99.999% (4N) or higher
- Feature: almost oxygen-free (typically <10 ppm)
- Result: more stable grain boundaries, less oxide formation, more uniform electron flow
P-Core
The P-core is maximally open magnetically and therefore offers very late, soft saturation with a high reserve under load. More copper is required for the same inductance, which is why the RDC is typically higher than with the H-Core.
It is precisely this exchange that is intended: more goodness and level stability instead of minimal DC resistance. P-Core coils are particularly strong when high currents and dynamic levels are to be safely processed.
They are typically used in bass and root tone applications.
Round Wire
Round wire coils are the tried and tested standard design: A solid conductor is formed into a winding and provides an easily calculable inductance. In terms of sound, DC resistance (RDC) is decisive here because it directly influences efficiency and control — especially in the bass range.
Ferrite HP3616
HP3616 is our precision material for low-signal applications: fast, clean and very compact. Particularly in correction links, equalizers and selected midrange tasks, he shows his strength in clarity and definition.
The design is decisive for high currents in the bass, as the magnetization reserves are limited.
Tight Tolerances
Tight tolerances in capacitance, inductance, and resistance ensure that capacitors of one type are very close together in terms of their electrical properties. In crossovers, the left and right channels therefore work virtually identically: crossover frequencies, level ratios and phase positions match closely. This is the basis for stable, precise stereo imaging and reproducible results — in series production and also after service.
Tonal Effects
- precise, stable soundstage without drifting
- Coherent overall impression: left and right channels fuse into a single, seamless whole
- characteristic sound is reliably retained even after component replacement/repair
- More stable virtual center and clearer spatial layering
OFC Copper
- Purity: at least 99.995% Cu, often 99.999% (4N) or higher
- Feature: almost oxygen-free (typically <10 ppm)
- Result: more stable grain boundaries, less oxide formation, more uniform electron flow
P-Core
The P-core is maximally open magnetically and therefore offers very late, soft saturation with a high reserve under load. More copper is required for the same inductance, which is why the RDC is typically higher than with the H-Core.
It is precisely this exchange that is intended: more goodness and level stability instead of minimal DC resistance. P-Core coils are particularly strong when high currents and dynamic levels are to be safely processed.
They are typically used in bass and root tone applications.
Round Wire
Round wire coils are the tried and tested standard design: A solid conductor is formed into a winding and provides an easily calculable inductance. In terms of sound, DC resistance (RDC) is decisive here because it directly influences efficiency and control — especially in the bass range.
Ferrite HP3616
HP3616 is our precision material for low-signal applications: fast, clean and very compact. Particularly in correction links, equalizers and selected midrange tasks, he shows his strength in clarity and definition.
The design is decisive for high currents in the bass, as the magnetization reserves are limited.
Tight Tolerances
Tight tolerances in capacitance, inductance, and resistance ensure that capacitors of one type are very close together in terms of their electrical properties. In crossovers, the left and right channels therefore work virtually identically: crossover frequencies, level ratios and phase positions match closely. This is the basis for stable, precise stereo imaging and reproducible results — in series production and also after service.
Tonal Effects
- precise, stable soundstage without drifting
- Coherent overall impression: left and right channels fuse into a single, seamless whole
- characteristic sound is reliably retained even after component replacement/repair
- More stable virtual center and clearer spatial layering
OFC Copper
- Purity: at least 99.995% Cu, often 99.999% (4N) or higher
- Feature: almost oxygen-free (typically <10 ppm)
- Result: more stable grain boundaries, less oxide formation, more uniform electron flow
P-Core
The P-core is maximally open magnetically and therefore offers very late, soft saturation with a high reserve under load. More copper is required for the same inductance, which is why the RDC is typically higher than with the H-Core.
It is precisely this exchange that is intended: more goodness and level stability instead of minimal DC resistance. P-Core coils are particularly strong when high currents and dynamic levels are to be safely processed.
They are typically used in bass and root tone applications.
Round Wire
Round wire coils are the tried and tested standard design: A solid conductor is formed into a winding and provides an easily calculable inductance. In terms of sound, DC resistance (RDC) is decisive here because it directly influences efficiency and control — especially in the bass range.
Ferrite HP3616
HP3616 is our precision material for low-signal applications: fast, clean and very compact. Particularly in correction links, equalizers and selected midrange tasks, he shows his strength in clarity and definition.
The design is decisive for high currents in the bass, as the magnetization reserves are limited.
Tight Tolerances
Tight tolerances in capacitance, inductance, and resistance ensure that capacitors of one type are very close together in terms of their electrical properties. In crossovers, the left and right channels therefore work virtually identically: crossover frequencies, level ratios and phase positions match closely. This is the basis for stable, precise stereo imaging and reproducible results — in series production and also after service.
Tonal Effects
- precise, stable soundstage without drifting
- Coherent overall impression: left and right channels fuse into a single, seamless whole
- characteristic sound is reliably retained even after component replacement/repair
- More stable virtual center and clearer spatial layering
OFC Copper
- Purity: at least 99.995% Cu, often 99.999% (4N) or higher
- Feature: almost oxygen-free (typically <10 ppm)
- Result: more stable grain boundaries, less oxide formation, more uniform electron flow
P-Core
The P-core is maximally open magnetically and therefore offers very late, soft saturation with a high reserve under load. More copper is required for the same inductance, which is why the RDC is typically higher than with the H-Core.
It is precisely this exchange that is intended: more goodness and level stability instead of minimal DC resistance. P-Core coils are particularly strong when high currents and dynamic levels are to be safely processed.
They are typically used in bass and root tone applications.
Round Wire
Round wire coils are the tried and tested standard design: A solid conductor is formed into a winding and provides an easily calculable inductance. In terms of sound, DC resistance (RDC) is decisive here because it directly influences efficiency and control — especially in the bass range.
Ferrite HP3616
HP3616 is our precision material for low-signal applications: fast, clean and very compact. Particularly in correction links, equalizers and selected midrange tasks, he shows his strength in clarity and definition.
The design is decisive for high currents in the bass, as the magnetization reserves are limited.
Tight Tolerances
Tight tolerances in capacitance, inductance, and resistance ensure that capacitors of one type are very close together in terms of their electrical properties. In crossovers, the left and right channels therefore work virtually identically: crossover frequencies, level ratios and phase positions match closely. This is the basis for stable, precise stereo imaging and reproducible results — in series production and also after service.
Tonal Effects
- precise, stable soundstage without drifting
- Coherent overall impression: left and right channels fuse into a single, seamless whole
- characteristic sound is reliably retained even after component replacement/repair
- More stable virtual center and clearer spatial layering
OFC Copper
- Purity: at least 99.995% Cu, often 99.999% (4N) or higher
- Feature: almost oxygen-free (typically <10 ppm)
- Result: more stable grain boundaries, less oxide formation, more uniform electron flow
P-Core
The P-core is maximally open magnetically and therefore offers very late, soft saturation with a high reserve under load. More copper is required for the same inductance, which is why the RDC is typically higher than with the H-Core.
It is precisely this exchange that is intended: more goodness and level stability instead of minimal DC resistance. P-Core coils are particularly strong when high currents and dynamic levels are to be safely processed.
They are typically used in bass and root tone applications.
Round Wire
Round wire coils are the tried and tested standard design: A solid conductor is formed into a winding and provides an easily calculable inductance. In terms of sound, DC resistance (RDC) is decisive here because it directly influences efficiency and control — especially in the bass range.
Ferrite HP3616
HP3616 is our precision material for low-signal applications: fast, clean and very compact. Particularly in correction links, equalizers and selected midrange tasks, he shows his strength in clarity and definition.
The design is decisive for high currents in the bass, as the magnetization reserves are limited.
Tight Tolerances
Tight tolerances in capacitance, inductance, and resistance ensure that capacitors of one type are very close together in terms of their electrical properties. In crossovers, the left and right channels therefore work virtually identically: crossover frequencies, level ratios and phase positions match closely. This is the basis for stable, precise stereo imaging and reproducible results — in series production and also after service.
Tonal Effects
- precise, stable soundstage without drifting
- Coherent overall impression: left and right channels fuse into a single, seamless whole
- characteristic sound is reliably retained even after component replacement/repair
- More stable virtual center and clearer spatial layering
OFC Copper
- Purity: at least 99.995% Cu, often 99.999% (4N) or higher
- Feature: almost oxygen-free (typically <10 ppm)
- Result: more stable grain boundaries, less oxide formation, more uniform electron flow
P-Core
The P-core is maximally open magnetically and therefore offers very late, soft saturation with a high reserve under load. More copper is required for the same inductance, which is why the RDC is typically higher than with the H-Core.
It is precisely this exchange that is intended: more goodness and level stability instead of minimal DC resistance. P-Core coils are particularly strong when high currents and dynamic levels are to be safely processed.
They are typically used in bass and root tone applications.
Round Wire
Round wire coils are the tried and tested standard design: A solid conductor is formed into a winding and provides an easily calculable inductance. In terms of sound, DC resistance (RDC) is decisive here because it directly influences efficiency and control — especially in the bass range.
Ferrite HP3616
HP3616 is our precision material for low-signal applications: fast, clean and very compact. Particularly in correction links, equalizers and selected midrange tasks, he shows his strength in clarity and definition.
The design is decisive for high currents in the bass, as the magnetization reserves are limited.
Tight Tolerances
Tight tolerances in capacitance, inductance, and resistance ensure that capacitors of one type are very close together in terms of their electrical properties. In crossovers, the left and right channels therefore work virtually identically: crossover frequencies, level ratios and phase positions match closely. This is the basis for stable, precise stereo imaging and reproducible results — in series production and also after service.
Tonal Effects
- precise, stable soundstage without drifting
- Coherent overall impression: left and right channels fuse into a single, seamless whole
- characteristic sound is reliably retained even after component replacement/repair
- More stable virtual center and clearer spatial layering
OFC Copper
- Purity: at least 99.995% Cu, often 99.999% (4N) or higher
- Feature: almost oxygen-free (typically <10 ppm)
- Result: more stable grain boundaries, less oxide formation, more uniform electron flow
P-Core
The P-core is maximally open magnetically and therefore offers very late, soft saturation with a high reserve under load. More copper is required for the same inductance, which is why the RDC is typically higher than with the H-Core.
It is precisely this exchange that is intended: more goodness and level stability instead of minimal DC resistance. P-Core coils are particularly strong when high currents and dynamic levels are to be safely processed.
They are typically used in bass and root tone applications.
Round Wire
Round wire coils are the tried and tested standard design: A solid conductor is formed into a winding and provides an easily calculable inductance. In terms of sound, DC resistance (RDC) is decisive here because it directly influences efficiency and control — especially in the bass range.
Ferrite HP3616
HP3616 is our precision material for low-signal applications: fast, clean and very compact. Particularly in correction links, equalizers and selected midrange tasks, he shows his strength in clarity and definition.
The design is decisive for high currents in the bass, as the magnetization reserves are limited.
Tight Tolerances
Tight tolerances in capacitance, inductance, and resistance ensure that capacitors of one type are very close together in terms of their electrical properties. In crossovers, the left and right channels therefore work virtually identically: crossover frequencies, level ratios and phase positions match closely. This is the basis for stable, precise stereo imaging and reproducible results — in series production and also after service.
Tonal Effects
- precise, stable soundstage without drifting
- Coherent overall impression: left and right channels fuse into a single, seamless whole
- characteristic sound is reliably retained even after component replacement/repair
- More stable virtual center and clearer spatial layering
OFC Copper
- Purity: at least 99.995% Cu, often 99.999% (4N) or higher
- Feature: almost oxygen-free (typically <10 ppm)
- Result: more stable grain boundaries, less oxide formation, more uniform electron flow
P-Core
The P-core is maximally open magnetically and therefore offers very late, soft saturation with a high reserve under load. More copper is required for the same inductance, which is why the RDC is typically higher than with the H-Core.
It is precisely this exchange that is intended: more goodness and level stability instead of minimal DC resistance. P-Core coils are particularly strong when high currents and dynamic levels are to be safely processed.
They are typically used in bass and root tone applications.
Round Wire
Round wire coils are the tried and tested standard design: A solid conductor is formed into a winding and provides an easily calculable inductance. In terms of sound, DC resistance (RDC) is decisive here because it directly influences efficiency and control — especially in the bass range.
Ferrite HP3616
HP3616 is our precision material for low-signal applications: fast, clean and very compact. Particularly in correction links, equalizers and selected midrange tasks, he shows his strength in clarity and definition.
The design is decisive for high currents in the bass, as the magnetization reserves are limited.
Tight Tolerances
Tight tolerances in capacitance, inductance, and resistance ensure that capacitors of one type are very close together in terms of their electrical properties. In crossovers, the left and right channels therefore work virtually identically: crossover frequencies, level ratios and phase positions match closely. This is the basis for stable, precise stereo imaging and reproducible results — in series production and also after service.
Tonal Effects
- precise, stable soundstage without drifting
- Coherent overall impression: left and right channels fuse into a single, seamless whole
- characteristic sound is reliably retained even after component replacement/repair
- More stable virtual center and clearer spatial layering
OFC Copper
- Purity: at least 99.995% Cu, often 99.999% (4N) or higher
- Feature: almost oxygen-free (typically <10 ppm)
- Result: more stable grain boundaries, less oxide formation, more uniform electron flow
P-Core
The P-core is maximally open magnetically and therefore offers very late, soft saturation with a high reserve under load. More copper is required for the same inductance, which is why the RDC is typically higher than with the H-Core.
It is precisely this exchange that is intended: more goodness and level stability instead of minimal DC resistance. P-Core coils are particularly strong when high currents and dynamic levels are to be safely processed.
They are typically used in bass and root tone applications.
Round Wire
Round wire coils are the tried and tested standard design: A solid conductor is formed into a winding and provides an easily calculable inductance. In terms of sound, DC resistance (RDC) is decisive here because it directly influences efficiency and control — especially in the bass range.
Ferrite HP3616
HP3616 is our precision material for low-signal applications: fast, clean and very compact. Particularly in correction links, equalizers and selected midrange tasks, he shows his strength in clarity and definition.
The design is decisive for high currents in the bass, as the magnetization reserves are limited.
Tight Tolerances
Tight tolerances in capacitance, inductance, and resistance ensure that capacitors of one type are very close together in terms of their electrical properties. In crossovers, the left and right channels therefore work virtually identically: crossover frequencies, level ratios and phase positions match closely. This is the basis for stable, precise stereo imaging and reproducible results — in series production and also after service.
Tonal Effects
- precise, stable soundstage without drifting
- Coherent overall impression: left and right channels fuse into a single, seamless whole
- characteristic sound is reliably retained even after component replacement/repair
- More stable virtual center and clearer spatial layering
OFC Copper
- Purity: at least 99.995% Cu, often 99.999% (4N) or higher
- Feature: almost oxygen-free (typically <10 ppm)
- Result: more stable grain boundaries, less oxide formation, more uniform electron flow
P-Core
The P-core is maximally open magnetically and therefore offers very late, soft saturation with a high reserve under load. More copper is required for the same inductance, which is why the RDC is typically higher than with the H-Core.
It is precisely this exchange that is intended: more goodness and level stability instead of minimal DC resistance. P-Core coils are particularly strong when high currents and dynamic levels are to be safely processed.
They are typically used in bass and root tone applications.
Round Wire
Round wire coils are the tried and tested standard design: A solid conductor is formed into a winding and provides an easily calculable inductance. In terms of sound, DC resistance (RDC) is decisive here because it directly influences efficiency and control — especially in the bass range.
Ferrite HP3616
HP3616 is our precision material for low-signal applications: fast, clean and very compact. Particularly in correction links, equalizers and selected midrange tasks, he shows his strength in clarity and definition.
The design is decisive for high currents in the bass, as the magnetization reserves are limited.
Tight Tolerances
Tight tolerances in capacitance, inductance, and resistance ensure that capacitors of one type are very close together in terms of their electrical properties. In crossovers, the left and right channels therefore work virtually identically: crossover frequencies, level ratios and phase positions match closely. This is the basis for stable, precise stereo imaging and reproducible results — in series production and also after service.
Tonal Effects
- precise, stable soundstage without drifting
- Coherent overall impression: left and right channels fuse into a single, seamless whole
- characteristic sound is reliably retained even after component replacement/repair
- More stable virtual center and clearer spatial layering
OFC Copper
- Purity: at least 99.995% Cu, often 99.999% (4N) or higher
- Feature: almost oxygen-free (typically <10 ppm)
- Result: more stable grain boundaries, less oxide formation, more uniform electron flow
P-Core
The P-core is maximally open magnetically and therefore offers very late, soft saturation with a high reserve under load. More copper is required for the same inductance, which is why the RDC is typically higher than with the H-Core.
It is precisely this exchange that is intended: more goodness and level stability instead of minimal DC resistance. P-Core coils are particularly strong when high currents and dynamic levels are to be safely processed.
They are typically used in bass and root tone applications.
Round Wire
Round wire coils are the tried and tested standard design: A solid conductor is formed into a winding and provides an easily calculable inductance. In terms of sound, DC resistance (RDC) is decisive here because it directly influences efficiency and control — especially in the bass range.
Ferrite HP3616
HP3616 is our precision material for low-signal applications: fast, clean and very compact. Particularly in correction links, equalizers and selected midrange tasks, he shows his strength in clarity and definition.
The design is decisive for high currents in the bass, as the magnetization reserves are limited.
Tight Tolerances
Tight tolerances in capacitance, inductance, and resistance ensure that capacitors of one type are very close together in terms of their electrical properties. In crossovers, the left and right channels therefore work virtually identically: crossover frequencies, level ratios and phase positions match closely. This is the basis for stable, precise stereo imaging and reproducible results — in series production and also after service.
Tonal Effects
- precise, stable soundstage without drifting
- Coherent overall impression: left and right channels fuse into a single, seamless whole
- characteristic sound is reliably retained even after component replacement/repair
- More stable virtual center and clearer spatial layering
OFC Copper
- Purity: at least 99.995% Cu, often 99.999% (4N) or higher
- Feature: almost oxygen-free (typically <10 ppm)
- Result: more stable grain boundaries, less oxide formation, more uniform electron flow
P-Core
The P-core is maximally open magnetically and therefore offers very late, soft saturation with a high reserve under load. More copper is required for the same inductance, which is why the RDC is typically higher than with the H-Core.
It is precisely this exchange that is intended: more goodness and level stability instead of minimal DC resistance. P-Core coils are particularly strong when high currents and dynamic levels are to be safely processed.
They are typically used in bass and root tone applications.
Round Wire
Round wire coils are the tried and tested standard design: A solid conductor is formed into a winding and provides an easily calculable inductance. In terms of sound, DC resistance (RDC) is decisive here because it directly influences efficiency and control — especially in the bass range.
Ferrite HP3616
HP3616 is our precision material for low-signal applications: fast, clean and very compact. Particularly in correction links, equalizers and selected midrange tasks, he shows his strength in clarity and definition.
The design is decisive for high currents in the bass, as the magnetization reserves are limited.
Tight Tolerances
Tight tolerances in capacitance, inductance, and resistance ensure that capacitors of one type are very close together in terms of their electrical properties. In crossovers, the left and right channels therefore work virtually identically: crossover frequencies, level ratios and phase positions match closely. This is the basis for stable, precise stereo imaging and reproducible results — in series production and also after service.
Tonal Effects
- precise, stable soundstage without drifting
- Coherent overall impression: left and right channels fuse into a single, seamless whole
- characteristic sound is reliably retained even after component replacement/repair
- More stable virtual center and clearer spatial layering
OFC Copper
- Purity: at least 99.995% Cu, often 99.999% (4N) or higher
- Feature: almost oxygen-free (typically <10 ppm)
- Result: more stable grain boundaries, less oxide formation, more uniform electron flow
P-Core
The P-core is maximally open magnetically and therefore offers very late, soft saturation with a high reserve under load. More copper is required for the same inductance, which is why the RDC is typically higher than with the H-Core.
It is precisely this exchange that is intended: more goodness and level stability instead of minimal DC resistance. P-Core coils are particularly strong when high currents and dynamic levels are to be safely processed.
They are typically used in bass and root tone applications.
Round Wire
Round wire coils are the tried and tested standard design: A solid conductor is formed into a winding and provides an easily calculable inductance. In terms of sound, DC resistance (RDC) is decisive here because it directly influences efficiency and control — especially in the bass range.
Ferrite HP3616
HP3616 is our precision material for low-signal applications: fast, clean and very compact. Particularly in correction links, equalizers and selected midrange tasks, he shows his strength in clarity and definition.
The design is decisive for high currents in the bass, as the magnetization reserves are limited.
Tight Tolerances
Tight tolerances in capacitance, inductance, and resistance ensure that capacitors of one type are very close together in terms of their electrical properties. In crossovers, the left and right channels therefore work virtually identically: crossover frequencies, level ratios and phase positions match closely. This is the basis for stable, precise stereo imaging and reproducible results — in series production and also after service.
Tonal Effects
- precise, stable soundstage without drifting
- Coherent overall impression: left and right channels fuse into a single, seamless whole
- characteristic sound is reliably retained even after component replacement/repair
- More stable virtual center and clearer spatial layering
OFC Copper
- Purity: at least 99.995% Cu, often 99.999% (4N) or higher
- Feature: almost oxygen-free (typically <10 ppm)
- Result: more stable grain boundaries, less oxide formation, more uniform electron flow
P-Core
The P-core is maximally open magnetically and therefore offers very late, soft saturation with a high reserve under load. More copper is required for the same inductance, which is why the RDC is typically higher than with the H-Core.
It is precisely this exchange that is intended: more goodness and level stability instead of minimal DC resistance. P-Core coils are particularly strong when high currents and dynamic levels are to be safely processed.
They are typically used in bass and root tone applications.
Round Wire
Round wire coils are the tried and tested standard design: A solid conductor is formed into a winding and provides an easily calculable inductance. In terms of sound, DC resistance (RDC) is decisive here because it directly influences efficiency and control — especially in the bass range.
Ferrite HP3616
HP3616 is our precision material for low-signal applications: fast, clean and very compact. Particularly in correction links, equalizers and selected midrange tasks, he shows his strength in clarity and definition.
The design is decisive for high currents in the bass, as the magnetization reserves are limited.
Tight Tolerances
Tight tolerances in capacitance, inductance, and resistance ensure that capacitors of one type are very close together in terms of their electrical properties. In crossovers, the left and right channels therefore work virtually identically: crossover frequencies, level ratios and phase positions match closely. This is the basis for stable, precise stereo imaging and reproducible results — in series production and also after service.
Tonal Effects
- precise, stable soundstage without drifting
- Coherent overall impression: left and right channels fuse into a single, seamless whole
- characteristic sound is reliably retained even after component replacement/repair
- More stable virtual center and clearer spatial layering
OFC Copper
- Purity: at least 99.995% Cu, often 99.999% (4N) or higher
- Feature: almost oxygen-free (typically <10 ppm)
- Result: more stable grain boundaries, less oxide formation, more uniform electron flow
P-Core
The P-core is maximally open magnetically and therefore offers very late, soft saturation with a high reserve under load. More copper is required for the same inductance, which is why the RDC is typically higher than with the H-Core.
It is precisely this exchange that is intended: more goodness and level stability instead of minimal DC resistance. P-Core coils are particularly strong when high currents and dynamic levels are to be safely processed.
They are typically used in bass and root tone applications.
Round Wire
Round wire coils are the tried and tested standard design: A solid conductor is formed into a winding and provides an easily calculable inductance. In terms of sound, DC resistance (RDC) is decisive here because it directly influences efficiency and control — especially in the bass range.
Ferrite HP3616
HP3616 is our precision material for low-signal applications: fast, clean and very compact. Particularly in correction links, equalizers and selected midrange tasks, he shows his strength in clarity and definition.
The design is decisive for high currents in the bass, as the magnetization reserves are limited.
Tight Tolerances
Tight tolerances in capacitance, inductance, and resistance ensure that capacitors of one type are very close together in terms of their electrical properties. In crossovers, the left and right channels therefore work virtually identically: crossover frequencies, level ratios and phase positions match closely. This is the basis for stable, precise stereo imaging and reproducible results — in series production and also after service.
Tonal Effects
- precise, stable soundstage without drifting
- Coherent overall impression: left and right channels fuse into a single, seamless whole
- characteristic sound is reliably retained even after component replacement/repair
- More stable virtual center and clearer spatial layering
OFC Copper
- Purity: at least 99.995% Cu, often 99.999% (4N) or higher
- Feature: almost oxygen-free (typically <10 ppm)
- Result: more stable grain boundaries, less oxide formation, more uniform electron flow
P-Core
The P-core is maximally open magnetically and therefore offers very late, soft saturation with a high reserve under load. More copper is required for the same inductance, which is why the RDC is typically higher than with the H-Core.
It is precisely this exchange that is intended: more goodness and level stability instead of minimal DC resistance. P-Core coils are particularly strong when high currents and dynamic levels are to be safely processed.
They are typically used in bass and root tone applications.
Round Wire
Round wire coils are the tried and tested standard design: A solid conductor is formed into a winding and provides an easily calculable inductance. In terms of sound, DC resistance (RDC) is decisive here because it directly influences efficiency and control — especially in the bass range.
Ferrite HP3616
HP3616 is our precision material for low-signal applications: fast, clean and very compact. Particularly in correction links, equalizers and selected midrange tasks, he shows his strength in clarity and definition.
The design is decisive for high currents in the bass, as the magnetization reserves are limited.
Tight Tolerances
Tight tolerances in capacitance, inductance, and resistance ensure that capacitors of one type are very close together in terms of their electrical properties. In crossovers, the left and right channels therefore work virtually identically: crossover frequencies, level ratios and phase positions match closely. This is the basis for stable, precise stereo imaging and reproducible results — in series production and also after service.
Tonal Effects
- precise, stable soundstage without drifting
- Coherent overall impression: left and right channels fuse into a single, seamless whole
- characteristic sound is reliably retained even after component replacement/repair
- More stable virtual center and clearer spatial layering
OFC Copper
- Purity: at least 99.995% Cu, often 99.999% (4N) or higher
- Feature: almost oxygen-free (typically <10 ppm)
- Result: more stable grain boundaries, less oxide formation, more uniform electron flow
P-Core
The P-core is maximally open magnetically and therefore offers very late, soft saturation with a high reserve under load. More copper is required for the same inductance, which is why the RDC is typically higher than with the H-Core.
It is precisely this exchange that is intended: more goodness and level stability instead of minimal DC resistance. P-Core coils are particularly strong when high currents and dynamic levels are to be safely processed.
They are typically used in bass and root tone applications.
Round Wire
Round wire coils are the tried and tested standard design: A solid conductor is formed into a winding and provides an easily calculable inductance. In terms of sound, DC resistance (RDC) is decisive here because it directly influences efficiency and control — especially in the bass range.
Ferrite HP3616
HP3616 is our precision material for low-signal applications: fast, clean and very compact. Particularly in correction links, equalizers and selected midrange tasks, he shows his strength in clarity and definition.
The design is decisive for high currents in the bass, as the magnetization reserves are limited.
Tight Tolerances
Tight tolerances in capacitance, inductance, and resistance ensure that capacitors of one type are very close together in terms of their electrical properties. In crossovers, the left and right channels therefore work virtually identically: crossover frequencies, level ratios and phase positions match closely. This is the basis for stable, precise stereo imaging and reproducible results — in series production and also after service.
Tonal Effects
- precise, stable soundstage without drifting
- Coherent overall impression: left and right channels fuse into a single, seamless whole
- characteristic sound is reliably retained even after component replacement/repair
- More stable virtual center and clearer spatial layering
OFC Copper
- Purity: at least 99.995% Cu, often 99.999% (4N) or higher
- Feature: almost oxygen-free (typically <10 ppm)
- Result: more stable grain boundaries, less oxide formation, more uniform electron flow
P-Core
The P-core is maximally open magnetically and therefore offers very late, soft saturation with a high reserve under load. More copper is required for the same inductance, which is why the RDC is typically higher than with the H-Core.
It is precisely this exchange that is intended: more goodness and level stability instead of minimal DC resistance. P-Core coils are particularly strong when high currents and dynamic levels are to be safely processed.
They are typically used in bass and root tone applications.
Round Wire
Round wire coils are the tried and tested standard design: A solid conductor is formed into a winding and provides an easily calculable inductance. In terms of sound, DC resistance (RDC) is decisive here because it directly influences efficiency and control — especially in the bass range.
Ferrite HP3616
HP3616 is our precision material for low-signal applications: fast, clean and very compact. Particularly in correction links, equalizers and selected midrange tasks, he shows his strength in clarity and definition.
The design is decisive for high currents in the bass, as the magnetization reserves are limited.
Tight Tolerances
Tight tolerances in capacitance, inductance, and resistance ensure that capacitors of one type are very close together in terms of their electrical properties. In crossovers, the left and right channels therefore work virtually identically: crossover frequencies, level ratios and phase positions match closely. This is the basis for stable, precise stereo imaging and reproducible results — in series production and also after service.
Tonal Effects
- precise, stable soundstage without drifting
- Coherent overall impression: left and right channels fuse into a single, seamless whole
- characteristic sound is reliably retained even after component replacement/repair
- More stable virtual center and clearer spatial layering
OFC Copper
- Purity: at least 99.995% Cu, often 99.999% (4N) or higher
- Feature: almost oxygen-free (typically <10 ppm)
- Result: more stable grain boundaries, less oxide formation, more uniform electron flow
P-Core
The P-core is maximally open magnetically and therefore offers very late, soft saturation with a high reserve under load. More copper is required for the same inductance, which is why the RDC is typically higher than with the H-Core.
It is precisely this exchange that is intended: more goodness and level stability instead of minimal DC resistance. P-Core coils are particularly strong when high currents and dynamic levels are to be safely processed.
They are typically used in bass and root tone applications.
Round Wire
Round wire coils are the tried and tested standard design: A solid conductor is formed into a winding and provides an easily calculable inductance. In terms of sound, DC resistance (RDC) is decisive here because it directly influences efficiency and control — especially in the bass range.
Ferrite HP3616
HP3616 is our precision material for low-signal applications: fast, clean and very compact. Particularly in correction links, equalizers and selected midrange tasks, he shows his strength in clarity and definition.
The design is decisive for high currents in the bass, as the magnetization reserves are limited.
Tight Tolerances
Tight tolerances in capacitance, inductance, and resistance ensure that capacitors of one type are very close together in terms of their electrical properties. In crossovers, the left and right channels therefore work virtually identically: crossover frequencies, level ratios and phase positions match closely. This is the basis for stable, precise stereo imaging and reproducible results — in series production and also after service.
Tonal Effects
- precise, stable soundstage without drifting
- Coherent overall impression: left and right channels fuse into a single, seamless whole
- characteristic sound is reliably retained even after component replacement/repair
- More stable virtual center and clearer spatial layering
OFC Copper
- Purity: at least 99.995% Cu, often 99.999% (4N) or higher
- Feature: almost oxygen-free (typically <10 ppm)
- Result: more stable grain boundaries, less oxide formation, more uniform electron flow
P-Core
The P-core is maximally open magnetically and therefore offers very late, soft saturation with a high reserve under load. More copper is required for the same inductance, which is why the RDC is typically higher than with the H-Core.
It is precisely this exchange that is intended: more goodness and level stability instead of minimal DC resistance. P-Core coils are particularly strong when high currents and dynamic levels are to be safely processed.
They are typically used in bass and root tone applications.
Round Wire
Round wire coils are the tried and tested standard design: A solid conductor is formed into a winding and provides an easily calculable inductance. In terms of sound, DC resistance (RDC) is decisive here because it directly influences efficiency and control — especially in the bass range.
Ferrite HP3616
HP3616 is our precision material for low-signal applications: fast, clean and very compact. Particularly in correction links, equalizers and selected midrange tasks, he shows his strength in clarity and definition.
The design is decisive for high currents in the bass, as the magnetization reserves are limited.
Tight Tolerances
Tight tolerances in capacitance, inductance, and resistance ensure that capacitors of one type are very close together in terms of their electrical properties. In crossovers, the left and right channels therefore work virtually identically: crossover frequencies, level ratios and phase positions match closely. This is the basis for stable, precise stereo imaging and reproducible results — in series production and also after service.
Tonal Effects
- precise, stable soundstage without drifting
- Coherent overall impression: left and right channels fuse into a single, seamless whole
- characteristic sound is reliably retained even after component replacement/repair
- More stable virtual center and clearer spatial layering
OFC Copper
- Purity: at least 99.995% Cu, often 99.999% (4N) or higher
- Feature: almost oxygen-free (typically <10 ppm)
- Result: more stable grain boundaries, less oxide formation, more uniform electron flow
P-Core
The P-core is maximally open magnetically and therefore offers very late, soft saturation with a high reserve under load. More copper is required for the same inductance, which is why the RDC is typically higher than with the H-Core.
It is precisely this exchange that is intended: more goodness and level stability instead of minimal DC resistance. P-Core coils are particularly strong when high currents and dynamic levels are to be safely processed.
They are typically used in bass and root tone applications.
Round Wire
Round wire coils are the tried and tested standard design: A solid conductor is formed into a winding and provides an easily calculable inductance. In terms of sound, DC resistance (RDC) is decisive here because it directly influences efficiency and control — especially in the bass range.
Ferrite HP3616
HP3616 is our precision material for low-signal applications: fast, clean and very compact. Particularly in correction links, equalizers and selected midrange tasks, he shows his strength in clarity and definition.
The design is decisive for high currents in the bass, as the magnetization reserves are limited.
Tight Tolerances
Tight tolerances in capacitance, inductance, and resistance ensure that capacitors of one type are very close together in terms of their electrical properties. In crossovers, the left and right channels therefore work virtually identically: crossover frequencies, level ratios and phase positions match closely. This is the basis for stable, precise stereo imaging and reproducible results — in series production and also after service.
Tonal Effects
- precise, stable soundstage without drifting
- Coherent overall impression: left and right channels fuse into a single, seamless whole
- characteristic sound is reliably retained even after component replacement/repair
- More stable virtual center and clearer spatial layering
OFC Copper
- Purity: at least 99.995% Cu, often 99.999% (4N) or higher
- Feature: almost oxygen-free (typically <10 ppm)
- Result: more stable grain boundaries, less oxide formation, more uniform electron flow
P-Core
The P-core is maximally open magnetically and therefore offers very late, soft saturation with a high reserve under load. More copper is required for the same inductance, which is why the RDC is typically higher than with the H-Core.
It is precisely this exchange that is intended: more goodness and level stability instead of minimal DC resistance. P-Core coils are particularly strong when high currents and dynamic levels are to be safely processed.
They are typically used in bass and root tone applications.
Round Wire
Round wire coils are the tried and tested standard design: A solid conductor is formed into a winding and provides an easily calculable inductance. In terms of sound, DC resistance (RDC) is decisive here because it directly influences efficiency and control — especially in the bass range.
Ferrite HP3616
HP3616 is our precision material for low-signal applications: fast, clean and very compact. Particularly in correction links, equalizers and selected midrange tasks, he shows his strength in clarity and definition.
The design is decisive for high currents in the bass, as the magnetization reserves are limited.
Tight Tolerances
Tight tolerances in capacitance, inductance, and resistance ensure that capacitors of one type are very close together in terms of their electrical properties. In crossovers, the left and right channels therefore work virtually identically: crossover frequencies, level ratios and phase positions match closely. This is the basis for stable, precise stereo imaging and reproducible results — in series production and also after service.
Tonal Effects
- precise, stable soundstage without drifting
- Coherent overall impression: left and right channels fuse into a single, seamless whole
- characteristic sound is reliably retained even after component replacement/repair
- More stable virtual center and clearer spatial layering
OFC Copper
- Purity: at least 99.995% Cu, often 99.999% (4N) or higher
- Feature: almost oxygen-free (typically <10 ppm)
- Result: more stable grain boundaries, less oxide formation, more uniform electron flow
P-Core
The P-core is maximally open magnetically and therefore offers very late, soft saturation with a high reserve under load. More copper is required for the same inductance, which is why the RDC is typically higher than with the H-Core.
It is precisely this exchange that is intended: more goodness and level stability instead of minimal DC resistance. P-Core coils are particularly strong when high currents and dynamic levels are to be safely processed.
They are typically used in bass and root tone applications.
Round Wire
Round wire coils are the tried and tested standard design: A solid conductor is formed into a winding and provides an easily calculable inductance. In terms of sound, DC resistance (RDC) is decisive here because it directly influences efficiency and control — especially in the bass range.
Ferrite HP3616
HP3616 is our precision material for low-signal applications: fast, clean and very compact. Particularly in correction links, equalizers and selected midrange tasks, he shows his strength in clarity and definition.
The design is decisive for high currents in the bass, as the magnetization reserves are limited.
Tight Tolerances
Tight tolerances in capacitance, inductance, and resistance ensure that capacitors of one type are very close together in terms of their electrical properties. In crossovers, the left and right channels therefore work virtually identically: crossover frequencies, level ratios and phase positions match closely. This is the basis for stable, precise stereo imaging and reproducible results — in series production and also after service.
Tonal Effects
- precise, stable soundstage without drifting
- Coherent overall impression: left and right channels fuse into a single, seamless whole
- characteristic sound is reliably retained even after component replacement/repair
- More stable virtual center and clearer spatial layering
OFC Copper
- Purity: at least 99.995% Cu, often 99.999% (4N) or higher
- Feature: almost oxygen-free (typically <10 ppm)
- Result: more stable grain boundaries, less oxide formation, more uniform electron flow
P-Core
The P-core is maximally open magnetically and therefore offers very late, soft saturation with a high reserve under load. More copper is required for the same inductance, which is why the RDC is typically higher than with the H-Core.
It is precisely this exchange that is intended: more goodness and level stability instead of minimal DC resistance. P-Core coils are particularly strong when high currents and dynamic levels are to be safely processed.
They are typically used in bass and root tone applications.
Round Wire
Round wire coils are the tried and tested standard design: A solid conductor is formed into a winding and provides an easily calculable inductance. In terms of sound, DC resistance (RDC) is decisive here because it directly influences efficiency and control — especially in the bass range.
Ferrite HP3616
HP3616 is our precision material for low-signal applications: fast, clean and very compact. Particularly in correction links, equalizers and selected midrange tasks, he shows his strength in clarity and definition.
The design is decisive for high currents in the bass, as the magnetization reserves are limited.
Tight Tolerances
Tight tolerances in capacitance, inductance, and resistance ensure that capacitors of one type are very close together in terms of their electrical properties. In crossovers, the left and right channels therefore work virtually identically: crossover frequencies, level ratios and phase positions match closely. This is the basis for stable, precise stereo imaging and reproducible results — in series production and also after service.
Tonal Effects
- precise, stable soundstage without drifting
- Coherent overall impression: left and right channels fuse into a single, seamless whole
- characteristic sound is reliably retained even after component replacement/repair
- More stable virtual center and clearer spatial layering
OFC Copper
- Purity: at least 99.995% Cu, often 99.999% (4N) or higher
- Feature: almost oxygen-free (typically <10 ppm)
- Result: more stable grain boundaries, less oxide formation, more uniform electron flow
P-Core
The P-core is maximally open magnetically and therefore offers very late, soft saturation with a high reserve under load. More copper is required for the same inductance, which is why the RDC is typically higher than with the H-Core.
It is precisely this exchange that is intended: more goodness and level stability instead of minimal DC resistance. P-Core coils are particularly strong when high currents and dynamic levels are to be safely processed.
They are typically used in bass and root tone applications.
Round Wire
Round wire coils are the tried and tested standard design: A solid conductor is formed into a winding and provides an easily calculable inductance. In terms of sound, DC resistance (RDC) is decisive here because it directly influences efficiency and control — especially in the bass range.
Ferrite HP3616
HP3616 is our precision material for low-signal applications: fast, clean and very compact. Particularly in correction links, equalizers and selected midrange tasks, he shows his strength in clarity and definition.
The design is decisive for high currents in the bass, as the magnetization reserves are limited.
Tight Tolerances
Tight tolerances in capacitance, inductance, and resistance ensure that capacitors of one type are very close together in terms of their electrical properties. In crossovers, the left and right channels therefore work virtually identically: crossover frequencies, level ratios and phase positions match closely. This is the basis for stable, precise stereo imaging and reproducible results — in series production and also after service.
Tonal Effects
- precise, stable soundstage without drifting
- Coherent overall impression: left and right channels fuse into a single, seamless whole
- characteristic sound is reliably retained even after component replacement/repair
- More stable virtual center and clearer spatial layering
OFC Copper
- Purity: at least 99.995% Cu, often 99.999% (4N) or higher
- Feature: almost oxygen-free (typically <10 ppm)
- Result: more stable grain boundaries, less oxide formation, more uniform electron flow
P-Core
The P-core is maximally open magnetically and therefore offers very late, soft saturation with a high reserve under load. More copper is required for the same inductance, which is why the RDC is typically higher than with the H-Core.
It is precisely this exchange that is intended: more goodness and level stability instead of minimal DC resistance. P-Core coils are particularly strong when high currents and dynamic levels are to be safely processed.
They are typically used in bass and root tone applications.
Round Wire
Round wire coils are the tried and tested standard design: A solid conductor is formed into a winding and provides an easily calculable inductance. In terms of sound, DC resistance (RDC) is decisive here because it directly influences efficiency and control — especially in the bass range.
Ferrite HP3616
HP3616 is our precision material for low-signal applications: fast, clean and very compact. Particularly in correction links, equalizers and selected midrange tasks, he shows his strength in clarity and definition.
The design is decisive for high currents in the bass, as the magnetization reserves are limited.
Tight Tolerances
Tight tolerances in capacitance, inductance, and resistance ensure that capacitors of one type are very close together in terms of their electrical properties. In crossovers, the left and right channels therefore work virtually identically: crossover frequencies, level ratios and phase positions match closely. This is the basis for stable, precise stereo imaging and reproducible results — in series production and also after service.
Tonal Effects
- precise, stable soundstage without drifting
- Coherent overall impression: left and right channels fuse into a single, seamless whole
- characteristic sound is reliably retained even after component replacement/repair
- More stable virtual center and clearer spatial layering
Contact
Thank you! We have received your request and will get back to you shortly.
Oops! Something went wrong while submitting. Please try again.
Sample request
Thank you! We have received your sample request and will get back to you shortly.
Oops! Something went wrong while submitting. Please try again.
Dealer search
Sample orders are currently available to business customers only. If you have any questions about our products, you can reach us at any time by email at info@mundorf.com or by phone on +49 221 977705 - 0.
Newsletter
News and tips straight to your inbox. Subscribe to our newsletter and choose the topics that matter to you.
Thank you! Your newsletter subscription has been received.
Oops! Something went wrong while submitting. Please try again.
Find a dealer
Art & Voice Medien GmbH
Davenstedter Str. 111,
30453 Hannover
Tel. +49 511 441046
www.highend-hifi-shop.de