Air coils

Air coils are the uncompromising reference: maximally linear, without distortions caused by the core. They deliver maximum impulse fidelity and particularly natural, open playback. If space and a sufficiently low DC resistance are possible, air is the first choice.

OFC Copper

• Purity: at least 99.995% Cu, often 99.999% (4N) or higher
• Feature: almost oxygen-free (typically <10 ppm)
• Result: more stable grain boundaries, less oxide formation, more uniform electron flow

Baked Varnish Wire/ Resin Soaking

Baked varnish wire is enamel-insulated wire with an additional, activatable hot-melt outer layer, which has an adhesive effect when heated. The windings are thus fixed together.

Impact in practice

• The coil becomes mechanically stable and „works“ significantly less
• Micro-movements between windings are reduced
• In particular, this reduces macro-microphonic effects (the windings „work“ less) and increases “silence” during operation

Resin soaking as an alternative to baked varnish wire

If no baked lacquer wire is used, resin soaking carried out under vacuum can take over the mechanical fixing. The resin penetrates into the wrap, reduces cavities and degrees of freedom of movement and transforms the wrap into a stable compound. The result: significantly less macro microphones and an overall quieter, more precise operation of the coil.

Tight Tolerances

Tight tolerances in capacitance, inductance, and resistance ensure that capacitors of one type are very close together in terms of their electrical properties. In crossovers, the left and right channels therefore work virtually identically: crossover frequencies, level ratios and phase positions match closely. This is the basis for stable, precise stereo imaging and reproducible results — in series production and also after service.

Tonal Effects

• precise, stable soundstage without drifting
• Coherent overall impression: left and right channels fuse into a single, seamless whole
• characteristic sound is reliably retained even after component replacement/repair
• More stable virtual center and clearer spatial layering

Air coils

Air coils are the uncompromising reference: maximally linear, without distortions caused by the core. They deliver maximum impulse fidelity and particularly natural, open playback. If space and a sufficiently low DC resistance are possible, air is the first choice.

OFC Copper

• Purity: at least 99.995% Cu, often 99.999% (4N) or higher
• Feature: almost oxygen-free (typically <10 ppm)
• Result: more stable grain boundaries, less oxide formation, more uniform electron flow

Baked Varnish Wire/ Resin Soaking

Baked varnish wire is enamel-insulated wire with an additional, activatable hot-melt outer layer, which has an adhesive effect when heated. The windings are thus fixed together.

Impact in practice

• The coil becomes mechanically stable and „works“ significantly less
• Micro-movements between windings are reduced
• In particular, this reduces macro-microphonic effects (the windings „work“ less) and increases “silence” during operation

Resin soaking as an alternative to baked varnish wire

If no baked lacquer wire is used, resin soaking carried out under vacuum can take over the mechanical fixing. The resin penetrates into the wrap, reduces cavities and degrees of freedom of movement and transforms the wrap into a stable compound. The result: significantly less macro microphones and an overall quieter, more precise operation of the coil.

Rectangular Wire

Structurally much more dimensionally stable than traditional round wire. Its geometry allows it to be wound more tightly, enabling a lower R_DC and more compact dimensions while maintaining the same inductance.

At the same time, the higher stiffness reduces the mechanical movement of the coil under load. This reduces macro-microphony and prevents coil vibrations from feeding back into the music signal as unwanted components.

The result: greater control, more tranquility, and a clearer rendering of dynamics.

Tight Tolerances

Tight tolerances in capacitance, inductance, and resistance ensure that capacitors of one type are very close together in terms of their electrical properties. In crossovers, the left and right channels therefore work virtually identically: crossover frequencies, level ratios and phase positions match closely. This is the basis for stable, precise stereo imaging and reproducible results — in series production and also after service.

Tonal Effects

• precise, stable soundstage without drifting
• Coherent overall impression: left and right channels fuse into a single, seamless whole
• characteristic sound is reliably retained even after component replacement/repair
• More stable virtual center and clearer spatial layering

Air coils

Air coils are the uncompromising reference: maximally linear, without distortions caused by the core. They deliver maximum impulse fidelity and particularly natural, open playback. If space and a sufficiently low DC resistance are possible, air is the first choice.

OFC Copper

• Purity: at least 99.995% Cu, often 99.999% (4N) or higher
• Feature: almost oxygen-free (typically <10 ppm)
• Result: more stable grain boundaries, less oxide formation, more uniform electron flow

Baked Varnish Wire/ Resin Soaking

Baked varnish wire is enamel-insulated wire with an additional, activatable hot-melt outer layer, which has an adhesive effect when heated. The windings are thus fixed together.

Impact in practice

• The coil becomes mechanically stable and „works“ significantly less
• Micro-movements between windings are reduced
• In particular, this reduces macro-microphonic effects (the windings „work“ less) and increases “silence” during operation

Resin soaking as an alternative to baked varnish wire

If no baked lacquer wire is used, resin soaking carried out under vacuum can take over the mechanical fixing. The resin penetrates into the wrap, reduces cavities and degrees of freedom of movement and transforms the wrap into a stable compound. The result: significantly less macro microphones and an overall quieter, more precise operation of the coil.

Rectangular Wire

Structurally much more dimensionally stable than traditional round wire. Its geometry allows it to be wound more tightly, enabling a lower R_DC and more compact dimensions while maintaining the same inductance.

At the same time, the higher stiffness reduces the mechanical movement of the coil under load. This reduces macro-microphony and prevents coil vibrations from feeding back into the music signal as unwanted components.

The result: greater control, more tranquility, and a clearer rendering of dynamics.

Tight Tolerances

Tight tolerances in capacitance, inductance, and resistance ensure that capacitors of one type are very close together in terms of their electrical properties. In crossovers, the left and right channels therefore work virtually identically: crossover frequencies, level ratios and phase positions match closely. This is the basis for stable, precise stereo imaging and reproducible results — in series production and also after service.

Tonal Effects

• precise, stable soundstage without drifting
• Coherent overall impression: left and right channels fuse into a single, seamless whole
• characteristic sound is reliably retained even after component replacement/repair
• More stable virtual center and clearer spatial layering

Air coils

Air coils are the uncompromising reference: maximally linear, without distortions caused by the core. They deliver maximum impulse fidelity and particularly natural, open playback. If space and a sufficiently low DC resistance are possible, air is the first choice.

OFC Copper

• Purity: at least 99.995% Cu, often 99.999% (4N) or higher
• Feature: almost oxygen-free (typically <10 ppm)
• Result: more stable grain boundaries, less oxide formation, more uniform electron flow

Baked Varnish Wire/ Resin Soaking

Baked varnish wire is enamel-insulated wire with an additional, activatable hot-melt outer layer, which has an adhesive effect when heated. The windings are thus fixed together.

Impact in practice

• The coil becomes mechanically stable and „works“ significantly less
• Micro-movements between windings are reduced
• In particular, this reduces macro-microphonic effects (the windings „work“ less) and increases “silence” during operation

Resin soaking as an alternative to baked varnish wire

If no baked lacquer wire is used, resin soaking carried out under vacuum can take over the mechanical fixing. The resin penetrates into the wrap, reduces cavities and degrees of freedom of movement and transforms the wrap into a stable compound. The result: significantly less macro microphones and an overall quieter, more precise operation of the coil.

Tight Tolerances

Tight tolerances in capacitance, inductance, and resistance ensure that capacitors of one type are very close together in terms of their electrical properties. In crossovers, the left and right channels therefore work virtually identically: crossover frequencies, level ratios and phase positions match closely. This is the basis for stable, precise stereo imaging and reproducible results — in series production and also after service.

Tonal Effects

• precise, stable soundstage without drifting
• Coherent overall impression: left and right channels fuse into a single, seamless whole
• characteristic sound is reliably retained even after component replacement/repair
• More stable virtual center and clearer spatial layering

Air coils

Air coils are the uncompromising reference: maximally linear, without distortions caused by the core. They deliver maximum impulse fidelity and particularly natural, open playback. If space and a sufficiently low DC resistance are possible, air is the first choice.

OFC Copper

• Purity: at least 99.995% Cu, often 99.999% (4N) or higher
• Feature: almost oxygen-free (typically <10 ppm)
• Result: more stable grain boundaries, less oxide formation, more uniform electron flow

Baked Varnish Wire/ Resin Soaking

Baked varnish wire is enamel-insulated wire with an additional, activatable hot-melt outer layer, which has an adhesive effect when heated. The windings are thus fixed together.

Impact in practice

• The coil becomes mechanically stable and „works“ significantly less
• Micro-movements between windings are reduced
• In particular, this reduces macro-microphonic effects (the windings „work“ less) and increases “silence” during operation

Resin soaking as an alternative to baked varnish wire

If no baked lacquer wire is used, resin soaking carried out under vacuum can take over the mechanical fixing. The resin penetrates into the wrap, reduces cavities and degrees of freedom of movement and transforms the wrap into a stable compound. The result: significantly less macro microphones and an overall quieter, more precise operation of the coil.

Tight Tolerances

Tight tolerances in capacitance, inductance, and resistance ensure that capacitors of one type are very close together in terms of their electrical properties. In crossovers, the left and right channels therefore work virtually identically: crossover frequencies, level ratios and phase positions match closely. This is the basis for stable, precise stereo imaging and reproducible results — in series production and also after service.

Tonal Effects

• precise, stable soundstage without drifting
• Coherent overall impression: left and right channels fuse into a single, seamless whole
• characteristic sound is reliably retained even after component replacement/repair
• More stable virtual center and clearer spatial layering

Baked Varnish Wire/ Resin Soaking

Baked varnish wire is enamel-insulated wire with an additional, activatable hot-melt outer layer, which has an adhesive effect when heated. The windings are thus fixed together.

Impact in practice

• The coil becomes mechanically stable and „works“ significantly less
• Micro-movements between windings are reduced
• In particular, this reduces macro-microphonic effects (the windings „work“ less) and increases “silence” during operation

Resin soaking as an alternative to baked varnish wire

If no baked lacquer wire is used, resin soaking carried out under vacuum can take over the mechanical fixing. The resin penetrates into the wrap, reduces cavities and degrees of freedom of movement and transforms the wrap into a stable compound. The result: significantly less macro microphones and an overall quieter, more precise operation of the coil.

Air coils

Air coils are the uncompromising reference: maximally linear, without distortions caused by the core. They deliver maximum impulse fidelity and particularly natural, open playback. If space and a sufficiently low DC resistance are possible, air is the first choice.

OFC Copper

• Purity: at least 99.995% Cu, often 99.999% (4N) or higher
• Feature: almost oxygen-free (typically <10 ppm)
• Result: more stable grain boundaries, less oxide formation, more uniform electron flow

Tight Tolerances

Tight tolerances in capacitance, inductance, and resistance ensure that capacitors of one type are very close together in terms of their electrical properties. In crossovers, the left and right channels therefore work virtually identically: crossover frequencies, level ratios and phase positions match closely. This is the basis for stable, precise stereo imaging and reproducible results — in series production and also after service.

Tonal Effects

• precise, stable soundstage without drifting
• Coherent overall impression: left and right channels fuse into a single, seamless whole
• characteristic sound is reliably retained even after component replacement/repair
• More stable virtual center and clearer spatial layering

Baked Varnish Wire/ Resin Soaking

Baked varnish wire is enamel-insulated wire with an additional, activatable hot-melt outer layer, which has an adhesive effect when heated. The windings are thus fixed together.

Impact in practice

• The coil becomes mechanically stable and „works“ significantly less
• Micro-movements between windings are reduced
• In particular, this reduces macro-microphonic effects (the windings „work“ less) and increases “silence” during operation

Resin soaking as an alternative to baked varnish wire

If no baked lacquer wire is used, resin soaking carried out under vacuum can take over the mechanical fixing. The resin penetrates into the wrap, reduces cavities and degrees of freedom of movement and transforms the wrap into a stable compound. The result: significantly less macro microphones and an overall quieter, more precise operation of the coil.

Air coils

Air coils are the uncompromising reference: maximally linear, without distortions caused by the core. They deliver maximum impulse fidelity and particularly natural, open playback. If space and a sufficiently low DC resistance are possible, air is the first choice.

OFC Copper

• Purity: at least 99.995% Cu, often 99.999% (4N) or higher
• Feature: almost oxygen-free (typically <10 ppm)
• Result: more stable grain boundaries, less oxide formation, more uniform electron flow

Tight Tolerances

Tight tolerances in capacitance, inductance, and resistance ensure that capacitors of one type are very close together in terms of their electrical properties. In crossovers, the left and right channels therefore work virtually identically: crossover frequencies, level ratios and phase positions match closely. This is the basis for stable, precise stereo imaging and reproducible results — in series production and also after service.

Tonal Effects

• precise, stable soundstage without drifting
• Coherent overall impression: left and right channels fuse into a single, seamless whole
• characteristic sound is reliably retained even after component replacement/repair
• More stable virtual center and clearer spatial layering

Air coils

Air coils are the uncompromising reference: maximally linear, without distortions caused by the core. They deliver maximum impulse fidelity and particularly natural, open playback. If space and a sufficiently low DC resistance are possible, air is the first choice.

OFC Copper

• Purity: at least 99.995% Cu, often 99.999% (4N) or higher
• Feature: almost oxygen-free (typically <10 ppm)
• Result: more stable grain boundaries, less oxide formation, more uniform electron flow

Baked Varnish Wire/ Resin Soaking

Baked varnish wire is enamel-insulated wire with an additional, activatable hot-melt outer layer, which has an adhesive effect when heated. The windings are thus fixed together.

Impact in practice

• The coil becomes mechanically stable and „works“ significantly less
• Micro-movements between windings are reduced
• In particular, this reduces macro-microphonic effects (the windings „work“ less) and increases “silence” during operation

Resin soaking as an alternative to baked varnish wire

If no baked lacquer wire is used, resin soaking carried out under vacuum can take over the mechanical fixing. The resin penetrates into the wrap, reduces cavities and degrees of freedom of movement and transforms the wrap into a stable compound. The result: significantly less macro microphones and an overall quieter, more precise operation of the coil.

Tight Tolerances

Tight tolerances in capacitance, inductance, and resistance ensure that capacitors of one type are very close together in terms of their electrical properties. In crossovers, the left and right channels therefore work virtually identically: crossover frequencies, level ratios and phase positions match closely. This is the basis for stable, precise stereo imaging and reproducible results — in series production and also after service.

Tonal Effects

• precise, stable soundstage without drifting
• Coherent overall impression: left and right channels fuse into a single, seamless whole
• characteristic sound is reliably retained even after component replacement/repair
• More stable virtual center and clearer spatial layering

Air coils

Air coils are the uncompromising reference: maximally linear, without distortions caused by the core. They deliver maximum impulse fidelity and particularly natural, open playback. If space and a sufficiently low DC resistance are possible, air is the first choice.

OFC Copper

• Purity: at least 99.995% Cu, often 99.999% (4N) or higher
• Feature: almost oxygen-free (typically <10 ppm)
• Result: more stable grain boundaries, less oxide formation, more uniform electron flow

Baked Varnish Wire/ Resin Soaking

Baked varnish wire is enamel-insulated wire with an additional, activatable hot-melt outer layer, which has an adhesive effect when heated. The windings are thus fixed together.

Impact in practice

• The coil becomes mechanically stable and „works“ significantly less
• Micro-movements between windings are reduced
• In particular, this reduces macro-microphonic effects (the windings „work“ less) and increases “silence” during operation

Resin soaking as an alternative to baked varnish wire

If no baked lacquer wire is used, resin soaking carried out under vacuum can take over the mechanical fixing. The resin penetrates into the wrap, reduces cavities and degrees of freedom of movement and transforms the wrap into a stable compound. The result: significantly less macro microphones and an overall quieter, more precise operation of the coil.

Tight Tolerances

Tight tolerances in capacitance, inductance, and resistance ensure that capacitors of one type are very close together in terms of their electrical properties. In crossovers, the left and right channels therefore work virtually identically: crossover frequencies, level ratios and phase positions match closely. This is the basis for stable, precise stereo imaging and reproducible results — in series production and also after service.

Tonal Effects

• precise, stable soundstage without drifting
• Coherent overall impression: left and right channels fuse into a single, seamless whole
• characteristic sound is reliably retained even after component replacement/repair
• More stable virtual center and clearer spatial layering

Baked Varnish Wire/ Resin Soaking

Baked varnish wire is enamel-insulated wire with an additional, activatable hot-melt outer layer, which has an adhesive effect when heated. The windings are thus fixed together.

Impact in practice

• The coil becomes mechanically stable and „works“ significantly less
• Micro-movements between windings are reduced
• In particular, this reduces macro-microphonic effects (the windings „work“ less) and increases “silence” during operation

Resin soaking as an alternative to baked varnish wire

If no baked lacquer wire is used, resin soaking carried out under vacuum can take over the mechanical fixing. The resin penetrates into the wrap, reduces cavities and degrees of freedom of movement and transforms the wrap into a stable compound. The result: significantly less macro microphones and an overall quieter, more precise operation of the coil.

Air coils

Air coils are the uncompromising reference: maximally linear, without distortions caused by the core. They deliver maximum impulse fidelity and particularly natural, open playback. If space and a sufficiently low DC resistance are possible, air is the first choice.

OFC Copper

• Purity: at least 99.995% Cu, often 99.999% (4N) or higher
• Feature: almost oxygen-free (typically <10 ppm)
• Result: more stable grain boundaries, less oxide formation, more uniform electron flow

Tight Tolerances

Tight tolerances in capacitance, inductance, and resistance ensure that capacitors of one type are very close together in terms of their electrical properties. In crossovers, the left and right channels therefore work virtually identically: crossover frequencies, level ratios and phase positions match closely. This is the basis for stable, precise stereo imaging and reproducible results — in series production and also after service.

Tonal Effects

• precise, stable soundstage without drifting
• Coherent overall impression: left and right channels fuse into a single, seamless whole
• characteristic sound is reliably retained even after component replacement/repair
• More stable virtual center and clearer spatial layering

Baked Varnish Wire/ Resin Soaking

Baked varnish wire is enamel-insulated wire with an additional, activatable hot-melt outer layer, which has an adhesive effect when heated. The windings are thus fixed together.

Impact in practice

• The coil becomes mechanically stable and „works“ significantly less
• Micro-movements between windings are reduced
• In particular, this reduces macro-microphonic effects (the windings „work“ less) and increases “silence” during operation

Resin soaking as an alternative to baked varnish wire

If no baked lacquer wire is used, resin soaking carried out under vacuum can take over the mechanical fixing. The resin penetrates into the wrap, reduces cavities and degrees of freedom of movement and transforms the wrap into a stable compound. The result: significantly less macro microphones and an overall quieter, more precise operation of the coil.

Air coils

Air coils are the uncompromising reference: maximally linear, without distortions caused by the core. They deliver maximum impulse fidelity and particularly natural, open playback. If space and a sufficiently low DC resistance are possible, air is the first choice.

OFC Copper

• Purity: at least 99.995% Cu, often 99.999% (4N) or higher
• Feature: almost oxygen-free (typically <10 ppm)
• Result: more stable grain boundaries, less oxide formation, more uniform electron flow

Tight Tolerances

Tight tolerances in capacitance, inductance, and resistance ensure that capacitors of one type are very close together in terms of their electrical properties. In crossovers, the left and right channels therefore work virtually identically: crossover frequencies, level ratios and phase positions match closely. This is the basis for stable, precise stereo imaging and reproducible results — in series production and also after service.

Tonal Effects

• precise, stable soundstage without drifting
• Coherent overall impression: left and right channels fuse into a single, seamless whole
• characteristic sound is reliably retained even after component replacement/repair
• More stable virtual center and clearer spatial layering

Air coils

Air coils are the uncompromising reference: maximally linear, without distortions caused by the core. They deliver maximum impulse fidelity and particularly natural, open playback. If space and a sufficiently low DC resistance are possible, air is the first choice.

OFC Copper

• Purity: at least 99.995% Cu, often 99.999% (4N) or higher
• Feature: almost oxygen-free (typically <10 ppm)
• Result: more stable grain boundaries, less oxide formation, more uniform electron flow

Baked Varnish Wire/ Resin Soaking

Baked varnish wire is enamel-insulated wire with an additional, activatable hot-melt outer layer, which has an adhesive effect when heated. The windings are thus fixed together.

Impact in practice

• The coil becomes mechanically stable and „works“ significantly less
• Micro-movements between windings are reduced
• In particular, this reduces macro-microphonic effects (the windings „work“ less) and increases “silence” during operation

Resin soaking as an alternative to baked varnish wire

If no baked lacquer wire is used, resin soaking carried out under vacuum can take over the mechanical fixing. The resin penetrates into the wrap, reduces cavities and degrees of freedom of movement and transforms the wrap into a stable compound. The result: significantly less macro microphones and an overall quieter, more precise operation of the coil.

Tight Tolerances

Tight tolerances in capacitance, inductance, and resistance ensure that capacitors of one type are very close together in terms of their electrical properties. In crossovers, the left and right channels therefore work virtually identically: crossover frequencies, level ratios and phase positions match closely. This is the basis for stable, precise stereo imaging and reproducible results — in series production and also after service.

Tonal Effects

• precise, stable soundstage without drifting
• Coherent overall impression: left and right channels fuse into a single, seamless whole
• characteristic sound is reliably retained even after component replacement/repair
• More stable virtual center and clearer spatial layering

Baked Varnish Wire/ Resin Soaking

Baked varnish wire is enamel-insulated wire with an additional, activatable hot-melt outer layer, which has an adhesive effect when heated. The windings are thus fixed together.

Impact in practice

• The coil becomes mechanically stable and „works“ significantly less
• Micro-movements between windings are reduced
• In particular, this reduces macro-microphonic effects (the windings „work“ less) and increases “silence” during operation

Resin soaking as an alternative to baked varnish wire

If no baked lacquer wire is used, resin soaking carried out under vacuum can take over the mechanical fixing. The resin penetrates into the wrap, reduces cavities and degrees of freedom of movement and transforms the wrap into a stable compound. The result: significantly less macro microphones and an overall quieter, more precise operation of the coil.

Air coils

Air coils are the uncompromising reference: maximally linear, without distortions caused by the core. They deliver maximum impulse fidelity and particularly natural, open playback. If space and a sufficiently low DC resistance are possible, air is the first choice.

OFC Copper

• Purity: at least 99.995% Cu, often 99.999% (4N) or higher
• Feature: almost oxygen-free (typically <10 ppm)
• Result: more stable grain boundaries, less oxide formation, more uniform electron flow

Tight Tolerances

Tight tolerances in capacitance, inductance, and resistance ensure that capacitors of one type are very close together in terms of their electrical properties. In crossovers, the left and right channels therefore work virtually identically: crossover frequencies, level ratios and phase positions match closely. This is the basis for stable, precise stereo imaging and reproducible results — in series production and also after service.

Tonal Effects

• precise, stable soundstage without drifting
• Coherent overall impression: left and right channels fuse into a single, seamless whole
• characteristic sound is reliably retained even after component replacement/repair
• More stable virtual center and clearer spatial layering

Air coils

Air coils are the uncompromising reference: maximally linear, without distortions caused by the core. They deliver maximum impulse fidelity and particularly natural, open playback. If space and a sufficiently low DC resistance are possible, air is the first choice.

OFC Copper

• Purity: at least 99.995% Cu, often 99.999% (4N) or higher
• Feature: almost oxygen-free (typically <10 ppm)
• Result: more stable grain boundaries, less oxide formation, more uniform electron flow

Baked Varnish Wire/ Resin Soaking

Baked varnish wire is enamel-insulated wire with an additional, activatable hot-melt outer layer, which has an adhesive effect when heated. The windings are thus fixed together.

Impact in practice

• The coil becomes mechanically stable and „works“ significantly less
• Micro-movements between windings are reduced
• In particular, this reduces macro-microphonic effects (the windings „work“ less) and increases “silence” during operation

Resin soaking as an alternative to baked varnish wire

If no baked lacquer wire is used, resin soaking carried out under vacuum can take over the mechanical fixing. The resin penetrates into the wrap, reduces cavities and degrees of freedom of movement and transforms the wrap into a stable compound. The result: significantly less macro microphones and an overall quieter, more precise operation of the coil.

Tight Tolerances

Tight tolerances in capacitance, inductance, and resistance ensure that capacitors of one type are very close together in terms of their electrical properties. In crossovers, the left and right channels therefore work virtually identically: crossover frequencies, level ratios and phase positions match closely. This is the basis for stable, precise stereo imaging and reproducible results — in series production and also after service.

Tonal Effects

• precise, stable soundstage without drifting
• Coherent overall impression: left and right channels fuse into a single, seamless whole
• characteristic sound is reliably retained even after component replacement/repair
• More stable virtual center and clearer spatial layering

Air coils

Air coils are the uncompromising reference: maximally linear, without distortions caused by the core. They deliver maximum impulse fidelity and particularly natural, open playback. If space and a sufficiently low DC resistance are possible, air is the first choice.

OFC Copper

• Purity: at least 99.995% Cu, often 99.999% (4N) or higher
• Feature: almost oxygen-free (typically <10 ppm)
• Result: more stable grain boundaries, less oxide formation, more uniform electron flow

Baked Varnish Wire/ Resin Soaking

Baked varnish wire is enamel-insulated wire with an additional, activatable hot-melt outer layer, which has an adhesive effect when heated. The windings are thus fixed together.

Impact in practice

• The coil becomes mechanically stable and „works“ significantly less
• Micro-movements between windings are reduced
• In particular, this reduces macro-microphonic effects (the windings „work“ less) and increases “silence” during operation

Resin soaking as an alternative to baked varnish wire

If no baked lacquer wire is used, resin soaking carried out under vacuum can take over the mechanical fixing. The resin penetrates into the wrap, reduces cavities and degrees of freedom of movement and transforms the wrap into a stable compound. The result: significantly less macro microphones and an overall quieter, more precise operation of the coil.

Tight Tolerances

Tight tolerances in capacitance, inductance, and resistance ensure that capacitors of one type are very close together in terms of their electrical properties. In crossovers, the left and right channels therefore work virtually identically: crossover frequencies, level ratios and phase positions match closely. This is the basis for stable, precise stereo imaging and reproducible results — in series production and also after service.

Tonal Effects

• precise, stable soundstage without drifting
• Coherent overall impression: left and right channels fuse into a single, seamless whole
• characteristic sound is reliably retained even after component replacement/repair
• More stable virtual center and clearer spatial layering

Baked Varnish Wire/ Resin Soaking

Baked varnish wire is enamel-insulated wire with an additional, activatable hot-melt outer layer, which has an adhesive effect when heated. The windings are thus fixed together.

Impact in practice

• The coil becomes mechanically stable and „works“ significantly less
• Micro-movements between windings are reduced
• In particular, this reduces macro-microphonic effects (the windings „work“ less) and increases “silence” during operation

Resin soaking as an alternative to baked varnish wire

If no baked lacquer wire is used, resin soaking carried out under vacuum can take over the mechanical fixing. The resin penetrates into the wrap, reduces cavities and degrees of freedom of movement and transforms the wrap into a stable compound. The result: significantly less macro microphones and an overall quieter, more precise operation of the coil.

Air coils

Air coils are the uncompromising reference: maximally linear, without distortions caused by the core. They deliver maximum impulse fidelity and particularly natural, open playback. If space and a sufficiently low DC resistance are possible, air is the first choice.

OFC Copper

• Purity: at least 99.995% Cu, often 99.999% (4N) or higher
• Feature: almost oxygen-free (typically <10 ppm)
• Result: more stable grain boundaries, less oxide formation, more uniform electron flow

Tight Tolerances

Tight tolerances in capacitance, inductance, and resistance ensure that capacitors of one type are very close together in terms of their electrical properties. In crossovers, the left and right channels therefore work virtually identically: crossover frequencies, level ratios and phase positions match closely. This is the basis for stable, precise stereo imaging and reproducible results — in series production and also after service.

Tonal Effects

• precise, stable soundstage without drifting
• Coherent overall impression: left and right channels fuse into a single, seamless whole
• characteristic sound is reliably retained even after component replacement/repair
• More stable virtual center and clearer spatial layering

Baked Varnish Wire/ Resin Soaking

Baked varnish wire is enamel-insulated wire with an additional, activatable hot-melt outer layer, which has an adhesive effect when heated. The windings are thus fixed together.

Impact in practice

• The coil becomes mechanically stable and „works“ significantly less
• Micro-movements between windings are reduced
• In particular, this reduces macro-microphonic effects (the windings „work“ less) and increases “silence” during operation

Resin soaking as an alternative to baked varnish wire

If no baked lacquer wire is used, resin soaking carried out under vacuum can take over the mechanical fixing. The resin penetrates into the wrap, reduces cavities and degrees of freedom of movement and transforms the wrap into a stable compound. The result: significantly less macro microphones and an overall quieter, more precise operation of the coil.

Air coils

Air coils are the uncompromising reference: maximally linear, without distortions caused by the core. They deliver maximum impulse fidelity and particularly natural, open playback. If space and a sufficiently low DC resistance are possible, air is the first choice.

OFC Copper

• Purity: at least 99.995% Cu, often 99.999% (4N) or higher
• Feature: almost oxygen-free (typically <10 ppm)
• Result: more stable grain boundaries, less oxide formation, more uniform electron flow

Tight Tolerances

Tight tolerances in capacitance, inductance, and resistance ensure that capacitors of one type are very close together in terms of their electrical properties. In crossovers, the left and right channels therefore work virtually identically: crossover frequencies, level ratios and phase positions match closely. This is the basis for stable, precise stereo imaging and reproducible results — in series production and also after service.

Tonal Effects

• precise, stable soundstage without drifting
• Coherent overall impression: left and right channels fuse into a single, seamless whole
• characteristic sound is reliably retained even after component replacement/repair
• More stable virtual center and clearer spatial layering

Air coils

Air coils are the uncompromising reference: maximally linear, without distortions caused by the core. They deliver maximum impulse fidelity and particularly natural, open playback. If space and a sufficiently low DC resistance are possible, air is the first choice.

OFC Copper

• Purity: at least 99.995% Cu, often 99.999% (4N) or higher
• Feature: almost oxygen-free (typically <10 ppm)
• Result: more stable grain boundaries, less oxide formation, more uniform electron flow

Baked Varnish Wire/ Resin Soaking

Baked varnish wire is enamel-insulated wire with an additional, activatable hot-melt outer layer, which has an adhesive effect when heated. The windings are thus fixed together.

Impact in practice

• The coil becomes mechanically stable and „works“ significantly less
• Micro-movements between windings are reduced
• In particular, this reduces macro-microphonic effects (the windings „work“ less) and increases “silence” during operation

Resin soaking as an alternative to baked varnish wire

If no baked lacquer wire is used, resin soaking carried out under vacuum can take over the mechanical fixing. The resin penetrates into the wrap, reduces cavities and degrees of freedom of movement and transforms the wrap into a stable compound. The result: significantly less macro microphones and an overall quieter, more precise operation of the coil.

Rectangular Wire

Structurally much more dimensionally stable than traditional round wire. Its geometry allows it to be wound more tightly, enabling a lower R_DC and more compact dimensions while maintaining the same inductance.

At the same time, the higher stiffness reduces the mechanical movement of the coil under load. This reduces macro-microphony and prevents coil vibrations from feeding back into the music signal as unwanted components.

The result: greater control, more tranquility, and a clearer rendering of dynamics.

Tight Tolerances

Tight tolerances in capacitance, inductance, and resistance ensure that capacitors of one type are very close together in terms of their electrical properties. In crossovers, the left and right channels therefore work virtually identically: crossover frequencies, level ratios and phase positions match closely. This is the basis for stable, precise stereo imaging and reproducible results — in series production and also after service.

Tonal Effects

• precise, stable soundstage without drifting
• Coherent overall impression: left and right channels fuse into a single, seamless whole
• characteristic sound is reliably retained even after component replacement/repair
• More stable virtual center and clearer spatial layering

Baked Varnish Wire/ Resin Soaking

Baked varnish wire is enamel-insulated wire with an additional, activatable hot-melt outer layer, which has an adhesive effect when heated. The windings are thus fixed together.

Impact in practice

• The coil becomes mechanically stable and „works“ significantly less
• Micro-movements between windings are reduced
• In particular, this reduces macro-microphonic effects (the windings „work“ less) and increases “silence” during operation

Resin soaking as an alternative to baked varnish wire

If no baked lacquer wire is used, resin soaking carried out under vacuum can take over the mechanical fixing. The resin penetrates into the wrap, reduces cavities and degrees of freedom of movement and transforms the wrap into a stable compound. The result: significantly less macro microphones and an overall quieter, more precise operation of the coil.

Air coils

Air coils are the uncompromising reference: maximally linear, without distortions caused by the core. They deliver maximum impulse fidelity and particularly natural, open playback. If space and a sufficiently low DC resistance are possible, air is the first choice.

OFC Copper

• Purity: at least 99.995% Cu, often 99.999% (4N) or higher
• Feature: almost oxygen-free (typically <10 ppm)
• Result: more stable grain boundaries, less oxide formation, more uniform electron flow

Tight Tolerances

Tight tolerances in capacitance, inductance, and resistance ensure that capacitors of one type are very close together in terms of their electrical properties. In crossovers, the left and right channels therefore work virtually identically: crossover frequencies, level ratios and phase positions match closely. This is the basis for stable, precise stereo imaging and reproducible results — in series production and also after service.

Tonal Effects

• precise, stable soundstage without drifting
• Coherent overall impression: left and right channels fuse into a single, seamless whole
• characteristic sound is reliably retained even after component replacement/repair
• More stable virtual center and clearer spatial layering

Baked Varnish Wire/ Resin Soaking

Baked varnish wire is enamel-insulated wire with an additional, activatable hot-melt outer layer, which has an adhesive effect when heated. The windings are thus fixed together.

Impact in practice

• The coil becomes mechanically stable and „works“ significantly less
• Micro-movements between windings are reduced
• In particular, this reduces macro-microphonic effects (the windings „work“ less) and increases “silence” during operation

Resin soaking as an alternative to baked varnish wire

If no baked lacquer wire is used, resin soaking carried out under vacuum can take over the mechanical fixing. The resin penetrates into the wrap, reduces cavities and degrees of freedom of movement and transforms the wrap into a stable compound. The result: significantly less macro microphones and an overall quieter, more precise operation of the coil.

Air coils

Air coils are the uncompromising reference: maximally linear, without distortions caused by the core. They deliver maximum impulse fidelity and particularly natural, open playback. If space and a sufficiently low DC resistance are possible, air is the first choice.

OFC Copper

• Purity: at least 99.995% Cu, often 99.999% (4N) or higher
• Feature: almost oxygen-free (typically <10 ppm)
• Result: more stable grain boundaries, less oxide formation, more uniform electron flow

Tight Tolerances

Tight tolerances in capacitance, inductance, and resistance ensure that capacitors of one type are very close together in terms of their electrical properties. In crossovers, the left and right channels therefore work virtually identically: crossover frequencies, level ratios and phase positions match closely. This is the basis for stable, precise stereo imaging and reproducible results — in series production and also after service.

Tonal Effects

• precise, stable soundstage without drifting
• Coherent overall impression: left and right channels fuse into a single, seamless whole
• characteristic sound is reliably retained even after component replacement/repair
• More stable virtual center and clearer spatial layering

Baked Varnish Wire/ Resin Soaking

Baked varnish wire is enamel-insulated wire with an additional, activatable hot-melt outer layer, which has an adhesive effect when heated. The windings are thus fixed together.

Impact in practice

• The coil becomes mechanically stable and „works“ significantly less
• Micro-movements between windings are reduced
• In particular, this reduces macro-microphonic effects (the windings „work“ less) and increases “silence” during operation

Resin soaking as an alternative to baked varnish wire

If no baked lacquer wire is used, resin soaking carried out under vacuum can take over the mechanical fixing. The resin penetrates into the wrap, reduces cavities and degrees of freedom of movement and transforms the wrap into a stable compound. The result: significantly less macro microphones and an overall quieter, more precise operation of the coil.

Air coils

Air coils are the uncompromising reference: maximally linear, without distortions caused by the core. They deliver maximum impulse fidelity and particularly natural, open playback. If space and a sufficiently low DC resistance are possible, air is the first choice.

OFC Copper

• Purity: at least 99.995% Cu, often 99.999% (4N) or higher
• Feature: almost oxygen-free (typically <10 ppm)
• Result: more stable grain boundaries, less oxide formation, more uniform electron flow

Tight Tolerances

Tight tolerances in capacitance, inductance, and resistance ensure that capacitors of one type are very close together in terms of their electrical properties. In crossovers, the left and right channels therefore work virtually identically: crossover frequencies, level ratios and phase positions match closely. This is the basis for stable, precise stereo imaging and reproducible results — in series production and also after service.

Tonal Effects

• precise, stable soundstage without drifting
• Coherent overall impression: left and right channels fuse into a single, seamless whole
• characteristic sound is reliably retained even after component replacement/repair
• More stable virtual center and clearer spatial layering

Baked Varnish Wire/ Resin Soaking

Baked varnish wire is enamel-insulated wire with an additional, activatable hot-melt outer layer, which has an adhesive effect when heated. The windings are thus fixed together.

Impact in practice

• The coil becomes mechanically stable and „works“ significantly less
• Micro-movements between windings are reduced
• In particular, this reduces macro-microphonic effects (the windings „work“ less) and increases “silence” during operation

Resin soaking as an alternative to baked varnish wire

If no baked lacquer wire is used, resin soaking carried out under vacuum can take over the mechanical fixing. The resin penetrates into the wrap, reduces cavities and degrees of freedom of movement and transforms the wrap into a stable compound. The result: significantly less macro microphones and an overall quieter, more precise operation of the coil.

Air coils

Air coils are the uncompromising reference: maximally linear, without distortions caused by the core. They deliver maximum impulse fidelity and particularly natural, open playback. If space and a sufficiently low DC resistance are possible, air is the first choice.

OFC Copper

• Purity: at least 99.995% Cu, often 99.999% (4N) or higher
• Feature: almost oxygen-free (typically <10 ppm)
• Result: more stable grain boundaries, less oxide formation, more uniform electron flow

Tight Tolerances

Tight tolerances in capacitance, inductance, and resistance ensure that capacitors of one type are very close together in terms of their electrical properties. In crossovers, the left and right channels therefore work virtually identically: crossover frequencies, level ratios and phase positions match closely. This is the basis for stable, precise stereo imaging and reproducible results — in series production and also after service.

Tonal Effects

• precise, stable soundstage without drifting
• Coherent overall impression: left and right channels fuse into a single, seamless whole
• characteristic sound is reliably retained even after component replacement/repair
• More stable virtual center and clearer spatial layering

Air coils

Air coils are the uncompromising reference: maximally linear, without distortions caused by the core. They deliver maximum impulse fidelity and particularly natural, open playback. If space and a sufficiently low DC resistance are possible, air is the first choice.

OFC Copper

• Purity: at least 99.995% Cu, often 99.999% (4N) or higher
• Feature: almost oxygen-free (typically <10 ppm)
• Result: more stable grain boundaries, less oxide formation, more uniform electron flow

Baked Varnish Wire/ Resin Soaking

Baked varnish wire is enamel-insulated wire with an additional, activatable hot-melt outer layer, which has an adhesive effect when heated. The windings are thus fixed together.

Impact in practice

• The coil becomes mechanically stable and „works“ significantly less
• Micro-movements between windings are reduced
• In particular, this reduces macro-microphonic effects (the windings „work“ less) and increases “silence” during operation

Resin soaking as an alternative to baked varnish wire

If no baked lacquer wire is used, resin soaking carried out under vacuum can take over the mechanical fixing. The resin penetrates into the wrap, reduces cavities and degrees of freedom of movement and transforms the wrap into a stable compound. The result: significantly less macro microphones and an overall quieter, more precise operation of the coil.

Tight Tolerances

Tight tolerances in capacitance, inductance, and resistance ensure that capacitors of one type are very close together in terms of their electrical properties. In crossovers, the left and right channels therefore work virtually identically: crossover frequencies, level ratios and phase positions match closely. This is the basis for stable, precise stereo imaging and reproducible results — in series production and also after service.

Tonal Effects

• precise, stable soundstage without drifting
• Coherent overall impression: left and right channels fuse into a single, seamless whole
• characteristic sound is reliably retained even after component replacement/repair
• More stable virtual center and clearer spatial layering

Baked Varnish Wire/ Resin Soaking

Baked varnish wire is enamel-insulated wire with an additional, activatable hot-melt outer layer, which has an adhesive effect when heated. The windings are thus fixed together.

Impact in practice

• The coil becomes mechanically stable and „works“ significantly less
• Micro-movements between windings are reduced
• In particular, this reduces macro-microphonic effects (the windings „work“ less) and increases “silence” during operation

Resin soaking as an alternative to baked varnish wire

If no baked lacquer wire is used, resin soaking carried out under vacuum can take over the mechanical fixing. The resin penetrates into the wrap, reduces cavities and degrees of freedom of movement and transforms the wrap into a stable compound. The result: significantly less macro microphones and an overall quieter, more precise operation of the coil.

Air coils

Air coils are the uncompromising reference: maximally linear, without distortions caused by the core. They deliver maximum impulse fidelity and particularly natural, open playback. If space and a sufficiently low DC resistance are possible, air is the first choice.

OFC Copper

• Purity: at least 99.995% Cu, often 99.999% (4N) or higher
• Feature: almost oxygen-free (typically <10 ppm)
• Result: more stable grain boundaries, less oxide formation, more uniform electron flow

Tight Tolerances

Tight tolerances in capacitance, inductance, and resistance ensure that capacitors of one type are very close together in terms of their electrical properties. In crossovers, the left and right channels therefore work virtually identically: crossover frequencies, level ratios and phase positions match closely. This is the basis for stable, precise stereo imaging and reproducible results — in series production and also after service.

Tonal Effects

• precise, stable soundstage without drifting
• Coherent overall impression: left and right channels fuse into a single, seamless whole
• characteristic sound is reliably retained even after component replacement/repair
• More stable virtual center and clearer spatial layering

Baked Varnish Wire/ Resin Soaking

Baked varnish wire is enamel-insulated wire with an additional, activatable hot-melt outer layer, which has an adhesive effect when heated. The windings are thus fixed together.

Impact in practice

• The coil becomes mechanically stable and „works“ significantly less
• Micro-movements between windings are reduced
• In particular, this reduces macro-microphonic effects (the windings „work“ less) and increases “silence” during operation

Resin soaking as an alternative to baked varnish wire

If no baked lacquer wire is used, resin soaking carried out under vacuum can take over the mechanical fixing. The resin penetrates into the wrap, reduces cavities and degrees of freedom of movement and transforms the wrap into a stable compound. The result: significantly less macro microphones and an overall quieter, more precise operation of the coil.

Air coils

Air coils are the uncompromising reference: maximally linear, without distortions caused by the core. They deliver maximum impulse fidelity and particularly natural, open playback. If space and a sufficiently low DC resistance are possible, air is the first choice.

OFC Copper

• Purity: at least 99.995% Cu, often 99.999% (4N) or higher
• Feature: almost oxygen-free (typically <10 ppm)
• Result: more stable grain boundaries, less oxide formation, more uniform electron flow

Tight Tolerances

Tight tolerances in capacitance, inductance, and resistance ensure that capacitors of one type are very close together in terms of their electrical properties. In crossovers, the left and right channels therefore work virtually identically: crossover frequencies, level ratios and phase positions match closely. This is the basis for stable, precise stereo imaging and reproducible results — in series production and also after service.

Tonal Effects

• precise, stable soundstage without drifting
• Coherent overall impression: left and right channels fuse into a single, seamless whole
• characteristic sound is reliably retained even after component replacement/repair
• More stable virtual center and clearer spatial layering

Baked Varnish Wire/ Resin Soaking

Baked varnish wire is enamel-insulated wire with an additional, activatable hot-melt outer layer, which has an adhesive effect when heated. The windings are thus fixed together.

Impact in practice

• The coil becomes mechanically stable and „works“ significantly less
• Micro-movements between windings are reduced
• In particular, this reduces macro-microphonic effects (the windings „work“ less) and increases “silence” during operation

Resin soaking as an alternative to baked varnish wire

If no baked lacquer wire is used, resin soaking carried out under vacuum can take over the mechanical fixing. The resin penetrates into the wrap, reduces cavities and degrees of freedom of movement and transforms the wrap into a stable compound. The result: significantly less macro microphones and an overall quieter, more precise operation of the coil.

Air coils

Air coils are the uncompromising reference: maximally linear, without distortions caused by the core. They deliver maximum impulse fidelity and particularly natural, open playback. If space and a sufficiently low DC resistance are possible, air is the first choice.

OFC Copper

• Purity: at least 99.995% Cu, often 99.999% (4N) or higher
• Feature: almost oxygen-free (typically <10 ppm)
• Result: more stable grain boundaries, less oxide formation, more uniform electron flow

Tight Tolerances

Tight tolerances in capacitance, inductance, and resistance ensure that capacitors of one type are very close together in terms of their electrical properties. In crossovers, the left and right channels therefore work virtually identically: crossover frequencies, level ratios and phase positions match closely. This is the basis for stable, precise stereo imaging and reproducible results — in series production and also after service.

Tonal Effects

• precise, stable soundstage without drifting
• Coherent overall impression: left and right channels fuse into a single, seamless whole
• characteristic sound is reliably retained even after component replacement/repair
• More stable virtual center and clearer spatial layering

Baked Varnish Wire/ Resin Soaking

Baked varnish wire is enamel-insulated wire with an additional, activatable hot-melt outer layer, which has an adhesive effect when heated. The windings are thus fixed together.

Impact in practice

• The coil becomes mechanically stable and „works“ significantly less
• Micro-movements between windings are reduced
• In particular, this reduces macro-microphonic effects (the windings „work“ less) and increases “silence” during operation

Resin soaking as an alternative to baked varnish wire

If no baked lacquer wire is used, resin soaking carried out under vacuum can take over the mechanical fixing. The resin penetrates into the wrap, reduces cavities and degrees of freedom of movement and transforms the wrap into a stable compound. The result: significantly less macro microphones and an overall quieter, more precise operation of the coil.

Air coils

Air coils are the uncompromising reference: maximally linear, without distortions caused by the core. They deliver maximum impulse fidelity and particularly natural, open playback. If space and a sufficiently low DC resistance are possible, air is the first choice.

OFC Copper

• Purity: at least 99.995% Cu, often 99.999% (4N) or higher
• Feature: almost oxygen-free (typically <10 ppm)
• Result: more stable grain boundaries, less oxide formation, more uniform electron flow

Tight Tolerances

Tight tolerances in capacitance, inductance, and resistance ensure that capacitors of one type are very close together in terms of their electrical properties. In crossovers, the left and right channels therefore work virtually identically: crossover frequencies, level ratios and phase positions match closely. This is the basis for stable, precise stereo imaging and reproducible results — in series production and also after service.

Tonal Effects

• precise, stable soundstage without drifting
• Coherent overall impression: left and right channels fuse into a single, seamless whole
• characteristic sound is reliably retained even after component replacement/repair
• More stable virtual center and clearer spatial layering

Baked Varnish Wire/ Resin Soaking

Baked varnish wire is enamel-insulated wire with an additional, activatable hot-melt outer layer, which has an adhesive effect when heated. The windings are thus fixed together.

Impact in practice

• The coil becomes mechanically stable and „works“ significantly less
• Micro-movements between windings are reduced
• In particular, this reduces macro-microphonic effects (the windings „work“ less) and increases “silence” during operation

Resin soaking as an alternative to baked varnish wire

If no baked lacquer wire is used, resin soaking carried out under vacuum can take over the mechanical fixing. The resin penetrates into the wrap, reduces cavities and degrees of freedom of movement and transforms the wrap into a stable compound. The result: significantly less macro microphones and an overall quieter, more precise operation of the coil.

Air coils

Air coils are the uncompromising reference: maximally linear, without distortions caused by the core. They deliver maximum impulse fidelity and particularly natural, open playback. If space and a sufficiently low DC resistance are possible, air is the first choice.

OFC Copper

• Purity: at least 99.995% Cu, often 99.999% (4N) or higher
• Feature: almost oxygen-free (typically <10 ppm)
• Result: more stable grain boundaries, less oxide formation, more uniform electron flow

Tight Tolerances

Tight tolerances in capacitance, inductance, and resistance ensure that capacitors of one type are very close together in terms of their electrical properties. In crossovers, the left and right channels therefore work virtually identically: crossover frequencies, level ratios and phase positions match closely. This is the basis for stable, precise stereo imaging and reproducible results — in series production and also after service.

Tonal Effects

• precise, stable soundstage without drifting
• Coherent overall impression: left and right channels fuse into a single, seamless whole
• characteristic sound is reliably retained even after component replacement/repair
• More stable virtual center and clearer spatial layering

Air coils

Air coils are the uncompromising reference: maximally linear, without distortions caused by the core. They deliver maximum impulse fidelity and particularly natural, open playback. If space and a sufficiently low DC resistance are possible, air is the first choice.

OFC Copper

• Purity: at least 99.995% Cu, often 99.999% (4N) or higher
• Feature: almost oxygen-free (typically <10 ppm)
• Result: more stable grain boundaries, less oxide formation, more uniform electron flow

Baked Varnish Wire/ Resin Soaking

Baked varnish wire is enamel-insulated wire with an additional, activatable hot-melt outer layer, which has an adhesive effect when heated. The windings are thus fixed together.

Impact in practice

• The coil becomes mechanically stable and „works“ significantly less
• Micro-movements between windings are reduced
• In particular, this reduces macro-microphonic effects (the windings „work“ less) and increases “silence” during operation

Resin soaking as an alternative to baked varnish wire

If no baked lacquer wire is used, resin soaking carried out under vacuum can take over the mechanical fixing. The resin penetrates into the wrap, reduces cavities and degrees of freedom of movement and transforms the wrap into a stable compound. The result: significantly less macro microphones and an overall quieter, more precise operation of the coil.

Rectangular Wire

Structurally much more dimensionally stable than traditional round wire. Its geometry allows it to be wound more tightly, enabling a lower R_DC and more compact dimensions while maintaining the same inductance.

At the same time, the higher stiffness reduces the mechanical movement of the coil under load. This reduces macro-microphony and prevents coil vibrations from feeding back into the music signal as unwanted components.

The result: greater control, more tranquility, and a clearer rendering of dynamics.

Tight Tolerances

Tight tolerances in capacitance, inductance, and resistance ensure that capacitors of one type are very close together in terms of their electrical properties. In crossovers, the left and right channels therefore work virtually identically: crossover frequencies, level ratios and phase positions match closely. This is the basis for stable, precise stereo imaging and reproducible results — in series production and also after service.

Tonal Effects

• precise, stable soundstage without drifting
• Coherent overall impression: left and right channels fuse into a single, seamless whole
• characteristic sound is reliably retained even after component replacement/repair
• More stable virtual center and clearer spatial layering

Air coils

Air coils are the uncompromising reference: maximally linear, without distortions caused by the core. They deliver maximum impulse fidelity and particularly natural, open playback. If space and a sufficiently low DC resistance are possible, air is the first choice.

OFC Copper

• Purity: at least 99.995% Cu, often 99.999% (4N) or higher
• Feature: almost oxygen-free (typically <10 ppm)
• Result: more stable grain boundaries, less oxide formation, more uniform electron flow

Baked Varnish Wire/ Resin Soaking

Baked varnish wire is enamel-insulated wire with an additional, activatable hot-melt outer layer, which has an adhesive effect when heated. The windings are thus fixed together.

Impact in practice

• The coil becomes mechanically stable and „works“ significantly less
• Micro-movements between windings are reduced
• In particular, this reduces macro-microphonic effects (the windings „work“ less) and increases “silence” during operation

Resin soaking as an alternative to baked varnish wire

If no baked lacquer wire is used, resin soaking carried out under vacuum can take over the mechanical fixing. The resin penetrates into the wrap, reduces cavities and degrees of freedom of movement and transforms the wrap into a stable compound. The result: significantly less macro microphones and an overall quieter, more precise operation of the coil.

Tight Tolerances

Tight tolerances in capacitance, inductance, and resistance ensure that capacitors of one type are very close together in terms of their electrical properties. In crossovers, the left and right channels therefore work virtually identically: crossover frequencies, level ratios and phase positions match closely. This is the basis for stable, precise stereo imaging and reproducible results — in series production and also after service.

Tonal Effects

• precise, stable soundstage without drifting
• Coherent overall impression: left and right channels fuse into a single, seamless whole
• characteristic sound is reliably retained even after component replacement/repair
• More stable virtual center and clearer spatial layering

Air coils

Air coils are the uncompromising reference: maximally linear, without distortions caused by the core. They deliver maximum impulse fidelity and particularly natural, open playback. If space and a sufficiently low DC resistance are possible, air is the first choice.

OFC Copper

• Purity: at least 99.995% Cu, often 99.999% (4N) or higher
• Feature: almost oxygen-free (typically <10 ppm)
• Result: more stable grain boundaries, less oxide formation, more uniform electron flow

Baked Varnish Wire/ Resin Soaking

Baked varnish wire is enamel-insulated wire with an additional, activatable hot-melt outer layer, which has an adhesive effect when heated. The windings are thus fixed together.

Impact in practice

• The coil becomes mechanically stable and „works“ significantly less
• Micro-movements between windings are reduced
• In particular, this reduces macro-microphonic effects (the windings „work“ less) and increases “silence” during operation

Resin soaking as an alternative to baked varnish wire

If no baked lacquer wire is used, resin soaking carried out under vacuum can take over the mechanical fixing. The resin penetrates into the wrap, reduces cavities and degrees of freedom of movement and transforms the wrap into a stable compound. The result: significantly less macro microphones and an overall quieter, more precise operation of the coil.

Tight Tolerances

Tight tolerances in capacitance, inductance, and resistance ensure that capacitors of one type are very close together in terms of their electrical properties. In crossovers, the left and right channels therefore work virtually identically: crossover frequencies, level ratios and phase positions match closely. This is the basis for stable, precise stereo imaging and reproducible results — in series production and also after service.

Tonal Effects

• precise, stable soundstage without drifting
• Coherent overall impression: left and right channels fuse into a single, seamless whole
• characteristic sound is reliably retained even after component replacement/repair
• More stable virtual center and clearer spatial layering

Baked Varnish Wire/ Resin Soaking

Baked varnish wire is enamel-insulated wire with an additional, activatable hot-melt outer layer, which has an adhesive effect when heated. The windings are thus fixed together.

Impact in practice

• The coil becomes mechanically stable and „works“ significantly less
• Micro-movements between windings are reduced
• In particular, this reduces macro-microphonic effects (the windings „work“ less) and increases “silence” during operation

Resin soaking as an alternative to baked varnish wire

If no baked lacquer wire is used, resin soaking carried out under vacuum can take over the mechanical fixing. The resin penetrates into the wrap, reduces cavities and degrees of freedom of movement and transforms the wrap into a stable compound. The result: significantly less macro microphones and an overall quieter, more precise operation of the coil.

Air coils

Air coils are the uncompromising reference: maximally linear, without distortions caused by the core. They deliver maximum impulse fidelity and particularly natural, open playback. If space and a sufficiently low DC resistance are possible, air is the first choice.

OFC Copper

• Purity: at least 99.995% Cu, often 99.999% (4N) or higher
• Feature: almost oxygen-free (typically <10 ppm)
• Result: more stable grain boundaries, less oxide formation, more uniform electron flow

Tight Tolerances

Tight tolerances in capacitance, inductance, and resistance ensure that capacitors of one type are very close together in terms of their electrical properties. In crossovers, the left and right channels therefore work virtually identically: crossover frequencies, level ratios and phase positions match closely. This is the basis for stable, precise stereo imaging and reproducible results — in series production and also after service.

Tonal Effects

• precise, stable soundstage without drifting
• Coherent overall impression: left and right channels fuse into a single, seamless whole
• characteristic sound is reliably retained even after component replacement/repair
• More stable virtual center and clearer spatial layering

Baked Varnish Wire/ Resin Soaking

Baked varnish wire is enamel-insulated wire with an additional, activatable hot-melt outer layer, which has an adhesive effect when heated. The windings are thus fixed together.

Impact in practice

• The coil becomes mechanically stable and „works“ significantly less
• Micro-movements between windings are reduced
• In particular, this reduces macro-microphonic effects (the windings „work“ less) and increases “silence” during operation

Resin soaking as an alternative to baked varnish wire

If no baked lacquer wire is used, resin soaking carried out under vacuum can take over the mechanical fixing. The resin penetrates into the wrap, reduces cavities and degrees of freedom of movement and transforms the wrap into a stable compound. The result: significantly less macro microphones and an overall quieter, more precise operation of the coil.

Air coils

Air coils are the uncompromising reference: maximally linear, without distortions caused by the core. They deliver maximum impulse fidelity and particularly natural, open playback. If space and a sufficiently low DC resistance are possible, air is the first choice.

OFC Copper

• Purity: at least 99.995% Cu, often 99.999% (4N) or higher
• Feature: almost oxygen-free (typically <10 ppm)
• Result: more stable grain boundaries, less oxide formation, more uniform electron flow

Tight Tolerances

Tight tolerances in capacitance, inductance, and resistance ensure that capacitors of one type are very close together in terms of their electrical properties. In crossovers, the left and right channels therefore work virtually identically: crossover frequencies, level ratios and phase positions match closely. This is the basis for stable, precise stereo imaging and reproducible results — in series production and also after service.

Tonal Effects

• precise, stable soundstage without drifting
• Coherent overall impression: left and right channels fuse into a single, seamless whole
• characteristic sound is reliably retained even after component replacement/repair
• More stable virtual center and clearer spatial layering

Baked Varnish Wire/ Resin Soaking

Baked varnish wire is enamel-insulated wire with an additional, activatable hot-melt outer layer, which has an adhesive effect when heated. The windings are thus fixed together.

Impact in practice

• The coil becomes mechanically stable and „works“ significantly less
• Micro-movements between windings are reduced
• In particular, this reduces macro-microphonic effects (the windings „work“ less) and increases “silence” during operation

Resin soaking as an alternative to baked varnish wire

If no baked lacquer wire is used, resin soaking carried out under vacuum can take over the mechanical fixing. The resin penetrates into the wrap, reduces cavities and degrees of freedom of movement and transforms the wrap into a stable compound. The result: significantly less macro microphones and an overall quieter, more precise operation of the coil.

Air coils

Air coils are the uncompromising reference: maximally linear, without distortions caused by the core. They deliver maximum impulse fidelity and particularly natural, open playback. If space and a sufficiently low DC resistance are possible, air is the first choice.

OFC Copper

• Purity: at least 99.995% Cu, often 99.999% (4N) or higher
• Feature: almost oxygen-free (typically <10 ppm)
• Result: more stable grain boundaries, less oxide formation, more uniform electron flow

Tight Tolerances

Tight tolerances in capacitance, inductance, and resistance ensure that capacitors of one type are very close together in terms of their electrical properties. In crossovers, the left and right channels therefore work virtually identically: crossover frequencies, level ratios and phase positions match closely. This is the basis for stable, precise stereo imaging and reproducible results — in series production and also after service.

Tonal Effects

• precise, stable soundstage without drifting
• Coherent overall impression: left and right channels fuse into a single, seamless whole
• characteristic sound is reliably retained even after component replacement/repair
• More stable virtual center and clearer spatial layering

Baked Varnish Wire/ Resin Soaking

Baked varnish wire is enamel-insulated wire with an additional, activatable hot-melt outer layer, which has an adhesive effect when heated. The windings are thus fixed together.

Impact in practice

• The coil becomes mechanically stable and „works“ significantly less
• Micro-movements between windings are reduced
• In particular, this reduces macro-microphonic effects (the windings „work“ less) and increases “silence” during operation

Resin soaking as an alternative to baked varnish wire

If no baked lacquer wire is used, resin soaking carried out under vacuum can take over the mechanical fixing. The resin penetrates into the wrap, reduces cavities and degrees of freedom of movement and transforms the wrap into a stable compound. The result: significantly less macro microphones and an overall quieter, more precise operation of the coil.

Air coils

Air coils are the uncompromising reference: maximally linear, without distortions caused by the core. They deliver maximum impulse fidelity and particularly natural, open playback. If space and a sufficiently low DC resistance are possible, air is the first choice.

OFC Copper

• Purity: at least 99.995% Cu, often 99.999% (4N) or higher
• Feature: almost oxygen-free (typically <10 ppm)
• Result: more stable grain boundaries, less oxide formation, more uniform electron flow

Tight Tolerances

Tight tolerances in capacitance, inductance, and resistance ensure that capacitors of one type are very close together in terms of their electrical properties. In crossovers, the left and right channels therefore work virtually identically: crossover frequencies, level ratios and phase positions match closely. This is the basis for stable, precise stereo imaging and reproducible results — in series production and also after service.

Tonal Effects

• precise, stable soundstage without drifting
• Coherent overall impression: left and right channels fuse into a single, seamless whole
• characteristic sound is reliably retained even after component replacement/repair
• More stable virtual center and clearer spatial layering

Baked Varnish Wire/ Resin Soaking

Baked varnish wire is enamel-insulated wire with an additional, activatable hot-melt outer layer, which has an adhesive effect when heated. The windings are thus fixed together.

Impact in practice

• The coil becomes mechanically stable and „works“ significantly less
• Micro-movements between windings are reduced
• In particular, this reduces macro-microphonic effects (the windings „work“ less) and increases “silence” during operation

Resin soaking as an alternative to baked varnish wire

If no baked lacquer wire is used, resin soaking carried out under vacuum can take over the mechanical fixing. The resin penetrates into the wrap, reduces cavities and degrees of freedom of movement and transforms the wrap into a stable compound. The result: significantly less macro microphones and an overall quieter, more precise operation of the coil.

Air coils

Air coils are the uncompromising reference: maximally linear, without distortions caused by the core. They deliver maximum impulse fidelity and particularly natural, open playback. If space and a sufficiently low DC resistance are possible, air is the first choice.

OFC Copper

• Purity: at least 99.995% Cu, often 99.999% (4N) or higher
• Feature: almost oxygen-free (typically <10 ppm)
• Result: more stable grain boundaries, less oxide formation, more uniform electron flow

Tight Tolerances

Tight tolerances in capacitance, inductance, and resistance ensure that capacitors of one type are very close together in terms of their electrical properties. In crossovers, the left and right channels therefore work virtually identically: crossover frequencies, level ratios and phase positions match closely. This is the basis for stable, precise stereo imaging and reproducible results — in series production and also after service.

Tonal Effects

• precise, stable soundstage without drifting
• Coherent overall impression: left and right channels fuse into a single, seamless whole
• characteristic sound is reliably retained even after component replacement/repair
• More stable virtual center and clearer spatial layering

Baked Varnish Wire/ Resin Soaking

Baked varnish wire is enamel-insulated wire with an additional, activatable hot-melt outer layer, which has an adhesive effect when heated. The windings are thus fixed together.

Impact in practice

• The coil becomes mechanically stable and „works“ significantly less
• Micro-movements between windings are reduced
• In particular, this reduces macro-microphonic effects (the windings „work“ less) and increases “silence” during operation

Resin soaking as an alternative to baked varnish wire

If no baked lacquer wire is used, resin soaking carried out under vacuum can take over the mechanical fixing. The resin penetrates into the wrap, reduces cavities and degrees of freedom of movement and transforms the wrap into a stable compound. The result: significantly less macro microphones and an overall quieter, more precise operation of the coil.

Air coils

Air coils are the uncompromising reference: maximally linear, without distortions caused by the core. They deliver maximum impulse fidelity and particularly natural, open playback. If space and a sufficiently low DC resistance are possible, air is the first choice.

OFC Copper

• Purity: at least 99.995% Cu, often 99.999% (4N) or higher
• Feature: almost oxygen-free (typically <10 ppm)
• Result: more stable grain boundaries, less oxide formation, more uniform electron flow

Tight Tolerances

Tight tolerances in capacitance, inductance, and resistance ensure that capacitors of one type are very close together in terms of their electrical properties. In crossovers, the left and right channels therefore work virtually identically: crossover frequencies, level ratios and phase positions match closely. This is the basis for stable, precise stereo imaging and reproducible results — in series production and also after service.

Tonal Effects

• precise, stable soundstage without drifting
• Coherent overall impression: left and right channels fuse into a single, seamless whole
• characteristic sound is reliably retained even after component replacement/repair
• More stable virtual center and clearer spatial layering

Baked Varnish Wire/ Resin Soaking

Baked varnish wire is enamel-insulated wire with an additional, activatable hot-melt outer layer, which has an adhesive effect when heated. The windings are thus fixed together.

Impact in practice

• The coil becomes mechanically stable and „works“ significantly less
• Micro-movements between windings are reduced
• In particular, this reduces macro-microphonic effects (the windings „work“ less) and increases “silence” during operation

Resin soaking as an alternative to baked varnish wire

If no baked lacquer wire is used, resin soaking carried out under vacuum can take over the mechanical fixing. The resin penetrates into the wrap, reduces cavities and degrees of freedom of movement and transforms the wrap into a stable compound. The result: significantly less macro microphones and an overall quieter, more precise operation of the coil.

Air coils

Air coils are the uncompromising reference: maximally linear, without distortions caused by the core. They deliver maximum impulse fidelity and particularly natural, open playback. If space and a sufficiently low DC resistance are possible, air is the first choice.

OFC Copper

• Purity: at least 99.995% Cu, often 99.999% (4N) or higher
• Feature: almost oxygen-free (typically <10 ppm)
• Result: more stable grain boundaries, less oxide formation, more uniform electron flow

Tight Tolerances

Tight tolerances in capacitance, inductance, and resistance ensure that capacitors of one type are very close together in terms of their electrical properties. In crossovers, the left and right channels therefore work virtually identically: crossover frequencies, level ratios and phase positions match closely. This is the basis for stable, precise stereo imaging and reproducible results — in series production and also after service.

Tonal Effects

• precise, stable soundstage without drifting
• Coherent overall impression: left and right channels fuse into a single, seamless whole
• characteristic sound is reliably retained even after component replacement/repair
• More stable virtual center and clearer spatial layering

Baked Varnish Wire/ Resin Soaking

Baked varnish wire is enamel-insulated wire with an additional, activatable hot-melt outer layer, which has an adhesive effect when heated. The windings are thus fixed together.

Impact in practice

• The coil becomes mechanically stable and „works“ significantly less
• Micro-movements between windings are reduced
• In particular, this reduces macro-microphonic effects (the windings „work“ less) and increases “silence” during operation

Resin soaking as an alternative to baked varnish wire

If no baked lacquer wire is used, resin soaking carried out under vacuum can take over the mechanical fixing. The resin penetrates into the wrap, reduces cavities and degrees of freedom of movement and transforms the wrap into a stable compound. The result: significantly less macro microphones and an overall quieter, more precise operation of the coil.

Air coils

Air coils are the uncompromising reference: maximally linear, without distortions caused by the core. They deliver maximum impulse fidelity and particularly natural, open playback. If space and a sufficiently low DC resistance are possible, air is the first choice.

OFC Copper

• Purity: at least 99.995% Cu, often 99.999% (4N) or higher
• Feature: almost oxygen-free (typically <10 ppm)
• Result: more stable grain boundaries, less oxide formation, more uniform electron flow

Tight Tolerances

Tight tolerances in capacitance, inductance, and resistance ensure that capacitors of one type are very close together in terms of their electrical properties. In crossovers, the left and right channels therefore work virtually identically: crossover frequencies, level ratios and phase positions match closely. This is the basis for stable, precise stereo imaging and reproducible results — in series production and also after service.

Tonal Effects

• precise, stable soundstage without drifting
• Coherent overall impression: left and right channels fuse into a single, seamless whole
• characteristic sound is reliably retained even after component replacement/repair
• More stable virtual center and clearer spatial layering

Baked Varnish Wire/ Resin Soaking

Baked varnish wire is enamel-insulated wire with an additional, activatable hot-melt outer layer, which has an adhesive effect when heated. The windings are thus fixed together.

Impact in practice

• The coil becomes mechanically stable and „works“ significantly less
• Micro-movements between windings are reduced
• In particular, this reduces macro-microphonic effects (the windings „work“ less) and increases “silence” during operation

Resin soaking as an alternative to baked varnish wire

If no baked lacquer wire is used, resin soaking carried out under vacuum can take over the mechanical fixing. The resin penetrates into the wrap, reduces cavities and degrees of freedom of movement and transforms the wrap into a stable compound. The result: significantly less macro microphones and an overall quieter, more precise operation of the coil.

Air coils

Air coils are the uncompromising reference: maximally linear, without distortions caused by the core. They deliver maximum impulse fidelity and particularly natural, open playback. If space and a sufficiently low DC resistance are possible, air is the first choice.

OFC Copper

• Purity: at least 99.995% Cu, often 99.999% (4N) or higher
• Feature: almost oxygen-free (typically <10 ppm)
• Result: more stable grain boundaries, less oxide formation, more uniform electron flow

Tight Tolerances

Tight tolerances in capacitance, inductance, and resistance ensure that capacitors of one type are very close together in terms of their electrical properties. In crossovers, the left and right channels therefore work virtually identically: crossover frequencies, level ratios and phase positions match closely. This is the basis for stable, precise stereo imaging and reproducible results — in series production and also after service.

Tonal Effects

• precise, stable soundstage without drifting
• Coherent overall impression: left and right channels fuse into a single, seamless whole
• characteristic sound is reliably retained even after component replacement/repair
• More stable virtual center and clearer spatial layering

Baked Varnish Wire/ Resin Soaking

Baked varnish wire is enamel-insulated wire with an additional, activatable hot-melt outer layer, which has an adhesive effect when heated. The windings are thus fixed together.

Impact in practice

• The coil becomes mechanically stable and „works“ significantly less
• Micro-movements between windings are reduced
• In particular, this reduces macro-microphonic effects (the windings „work“ less) and increases “silence” during operation

Resin soaking as an alternative to baked varnish wire

If no baked lacquer wire is used, resin soaking carried out under vacuum can take over the mechanical fixing. The resin penetrates into the wrap, reduces cavities and degrees of freedom of movement and transforms the wrap into a stable compound. The result: significantly less macro microphones and an overall quieter, more precise operation of the coil.

Air coils

Air coils are the uncompromising reference: maximally linear, without distortions caused by the core. They deliver maximum impulse fidelity and particularly natural, open playback. If space and a sufficiently low DC resistance are possible, air is the first choice.

OFC Copper

• Purity: at least 99.995% Cu, often 99.999% (4N) or higher
• Feature: almost oxygen-free (typically <10 ppm)
• Result: more stable grain boundaries, less oxide formation, more uniform electron flow

Tight Tolerances

Tight tolerances in capacitance, inductance, and resistance ensure that capacitors of one type are very close together in terms of their electrical properties. In crossovers, the left and right channels therefore work virtually identically: crossover frequencies, level ratios and phase positions match closely. This is the basis for stable, precise stereo imaging and reproducible results — in series production and also after service.

Tonal Effects

• precise, stable soundstage without drifting
• Coherent overall impression: left and right channels fuse into a single, seamless whole
• characteristic sound is reliably retained even after component replacement/repair
• More stable virtual center and clearer spatial layering

Baked Varnish Wire/ Resin Soaking

Baked varnish wire is enamel-insulated wire with an additional, activatable hot-melt outer layer, which has an adhesive effect when heated. The windings are thus fixed together.

Impact in practice

• The coil becomes mechanically stable and „works“ significantly less
• Micro-movements between windings are reduced
• In particular, this reduces macro-microphonic effects (the windings „work“ less) and increases “silence” during operation

Resin soaking as an alternative to baked varnish wire

If no baked lacquer wire is used, resin soaking carried out under vacuum can take over the mechanical fixing. The resin penetrates into the wrap, reduces cavities and degrees of freedom of movement and transforms the wrap into a stable compound. The result: significantly less macro microphones and an overall quieter, more precise operation of the coil.

Air coils

Air coils are the uncompromising reference: maximally linear, without distortions caused by the core. They deliver maximum impulse fidelity and particularly natural, open playback. If space and a sufficiently low DC resistance are possible, air is the first choice.

OFC Copper

• Purity: at least 99.995% Cu, often 99.999% (4N) or higher
• Feature: almost oxygen-free (typically <10 ppm)
• Result: more stable grain boundaries, less oxide formation, more uniform electron flow

Tight Tolerances

Tight tolerances in capacitance, inductance, and resistance ensure that capacitors of one type are very close together in terms of their electrical properties. In crossovers, the left and right channels therefore work virtually identically: crossover frequencies, level ratios and phase positions match closely. This is the basis for stable, precise stereo imaging and reproducible results — in series production and also after service.

Tonal Effects

• precise, stable soundstage without drifting
• Coherent overall impression: left and right channels fuse into a single, seamless whole
• characteristic sound is reliably retained even after component replacement/repair
• More stable virtual center and clearer spatial layering

Baked Varnish Wire/ Resin Soaking

Baked varnish wire is enamel-insulated wire with an additional, activatable hot-melt outer layer, which has an adhesive effect when heated. The windings are thus fixed together.

Impact in practice

• The coil becomes mechanically stable and „works“ significantly less
• Micro-movements between windings are reduced
• In particular, this reduces macro-microphonic effects (the windings „work“ less) and increases “silence” during operation

Resin soaking as an alternative to baked varnish wire

If no baked lacquer wire is used, resin soaking carried out under vacuum can take over the mechanical fixing. The resin penetrates into the wrap, reduces cavities and degrees of freedom of movement and transforms the wrap into a stable compound. The result: significantly less macro microphones and an overall quieter, more precise operation of the coil.

Air coils

Air coils are the uncompromising reference: maximally linear, without distortions caused by the core. They deliver maximum impulse fidelity and particularly natural, open playback. If space and a sufficiently low DC resistance are possible, air is the first choice.

OFC Copper

• Purity: at least 99.995% Cu, often 99.999% (4N) or higher
• Feature: almost oxygen-free (typically <10 ppm)
• Result: more stable grain boundaries, less oxide formation, more uniform electron flow

Tight Tolerances

Tight tolerances in capacitance, inductance, and resistance ensure that capacitors of one type are very close together in terms of their electrical properties. In crossovers, the left and right channels therefore work virtually identically: crossover frequencies, level ratios and phase positions match closely. This is the basis for stable, precise stereo imaging and reproducible results — in series production and also after service.

Tonal Effects

• precise, stable soundstage without drifting
• Coherent overall impression: left and right channels fuse into a single, seamless whole
• characteristic sound is reliably retained even after component replacement/repair
• More stable virtual center and clearer spatial layering

Baked Varnish Wire/ Resin Soaking

Baked varnish wire is enamel-insulated wire with an additional, activatable hot-melt outer layer, which has an adhesive effect when heated. The windings are thus fixed together.

Impact in practice

• The coil becomes mechanically stable and „works“ significantly less
• Micro-movements between windings are reduced
• In particular, this reduces macro-microphonic effects (the windings „work“ less) and increases “silence” during operation

Resin soaking as an alternative to baked varnish wire

If no baked lacquer wire is used, resin soaking carried out under vacuum can take over the mechanical fixing. The resin penetrates into the wrap, reduces cavities and degrees of freedom of movement and transforms the wrap into a stable compound. The result: significantly less macro microphones and an overall quieter, more precise operation of the coil.

Air coils

Air coils are the uncompromising reference: maximally linear, without distortions caused by the core. They deliver maximum impulse fidelity and particularly natural, open playback. If space and a sufficiently low DC resistance are possible, air is the first choice.

OFC Copper

• Purity: at least 99.995% Cu, often 99.999% (4N) or higher
• Feature: almost oxygen-free (typically <10 ppm)
• Result: more stable grain boundaries, less oxide formation, more uniform electron flow

Tight Tolerances

Tight tolerances in capacitance, inductance, and resistance ensure that capacitors of one type are very close together in terms of their electrical properties. In crossovers, the left and right channels therefore work virtually identically: crossover frequencies, level ratios and phase positions match closely. This is the basis for stable, precise stereo imaging and reproducible results — in series production and also after service.

Tonal Effects

• precise, stable soundstage without drifting
• Coherent overall impression: left and right channels fuse into a single, seamless whole
• characteristic sound is reliably retained even after component replacement/repair
• More stable virtual center and clearer spatial layering

Baked Varnish Wire/ Resin Soaking

Baked varnish wire is enamel-insulated wire with an additional, activatable hot-melt outer layer, which has an adhesive effect when heated. The windings are thus fixed together.

Impact in practice

• The coil becomes mechanically stable and „works“ significantly less
• Micro-movements between windings are reduced
• In particular, this reduces macro-microphonic effects (the windings „work“ less) and increases “silence” during operation

Resin soaking as an alternative to baked varnish wire

If no baked lacquer wire is used, resin soaking carried out under vacuum can take over the mechanical fixing. The resin penetrates into the wrap, reduces cavities and degrees of freedom of movement and transforms the wrap into a stable compound. The result: significantly less macro microphones and an overall quieter, more precise operation of the coil.

Air coils

Air coils are the uncompromising reference: maximally linear, without distortions caused by the core. They deliver maximum impulse fidelity and particularly natural, open playback. If space and a sufficiently low DC resistance are possible, air is the first choice.

OFC Copper

• Purity: at least 99.995% Cu, often 99.999% (4N) or higher
• Feature: almost oxygen-free (typically <10 ppm)
• Result: more stable grain boundaries, less oxide formation, more uniform electron flow

Tight Tolerances

Tight tolerances in capacitance, inductance, and resistance ensure that capacitors of one type are very close together in terms of their electrical properties. In crossovers, the left and right channels therefore work virtually identically: crossover frequencies, level ratios and phase positions match closely. This is the basis for stable, precise stereo imaging and reproducible results — in series production and also after service.

Tonal Effects

• precise, stable soundstage without drifting
• Coherent overall impression: left and right channels fuse into a single, seamless whole
• characteristic sound is reliably retained even after component replacement/repair
• More stable virtual center and clearer spatial layering

Baked Varnish Wire/ Resin Soaking

Baked varnish wire is enamel-insulated wire with an additional, activatable hot-melt outer layer, which has an adhesive effect when heated. The windings are thus fixed together.

Impact in practice

• The coil becomes mechanically stable and „works“ significantly less
• Micro-movements between windings are reduced
• In particular, this reduces macro-microphonic effects (the windings „work“ less) and increases “silence” during operation

Resin soaking as an alternative to baked varnish wire

If no baked lacquer wire is used, resin soaking carried out under vacuum can take over the mechanical fixing. The resin penetrates into the wrap, reduces cavities and degrees of freedom of movement and transforms the wrap into a stable compound. The result: significantly less macro microphones and an overall quieter, more precise operation of the coil.

Air coils

Air coils are the uncompromising reference: maximally linear, without distortions caused by the core. They deliver maximum impulse fidelity and particularly natural, open playback. If space and a sufficiently low DC resistance are possible, air is the first choice.

OFC Copper

• Purity: at least 99.995% Cu, often 99.999% (4N) or higher
• Feature: almost oxygen-free (typically <10 ppm)
• Result: more stable grain boundaries, less oxide formation, more uniform electron flow

Tight Tolerances

Tight tolerances in capacitance, inductance, and resistance ensure that capacitors of one type are very close together in terms of their electrical properties. In crossovers, the left and right channels therefore work virtually identically: crossover frequencies, level ratios and phase positions match closely. This is the basis for stable, precise stereo imaging and reproducible results — in series production and also after service.

Tonal Effects

• precise, stable soundstage without drifting
• Coherent overall impression: left and right channels fuse into a single, seamless whole
• characteristic sound is reliably retained even after component replacement/repair
• More stable virtual center and clearer spatial layering

Air coils

Air coils are the uncompromising reference: maximally linear, without distortions caused by the core. They deliver maximum impulse fidelity and particularly natural, open playback. If space and a sufficiently low DC resistance are possible, air is the first choice.

OFC Copper

• Purity: at least 99.995% Cu, often 99.999% (4N) or higher
• Feature: almost oxygen-free (typically <10 ppm)
• Result: more stable grain boundaries, less oxide formation, more uniform electron flow

Baked Varnish Wire/ Resin Soaking

Baked varnish wire is enamel-insulated wire with an additional, activatable hot-melt outer layer, which has an adhesive effect when heated. The windings are thus fixed together.

Impact in practice

• The coil becomes mechanically stable and „works“ significantly less
• Micro-movements between windings are reduced
• In particular, this reduces macro-microphonic effects (the windings „work“ less) and increases “silence” during operation

Resin soaking as an alternative to baked varnish wire

If no baked lacquer wire is used, resin soaking carried out under vacuum can take over the mechanical fixing. The resin penetrates into the wrap, reduces cavities and degrees of freedom of movement and transforms the wrap into a stable compound. The result: significantly less macro microphones and an overall quieter, more precise operation of the coil.

Rectangular Wire

Structurally much more dimensionally stable than traditional round wire. Its geometry allows it to be wound more tightly, enabling a lower R_DC and more compact dimensions while maintaining the same inductance.

At the same time, the higher stiffness reduces the mechanical movement of the coil under load. This reduces macro-microphony and prevents coil vibrations from feeding back into the music signal as unwanted components.

The result: greater control, more tranquility, and a clearer rendering of dynamics.

Tight Tolerances

Tight tolerances in capacitance, inductance, and resistance ensure that capacitors of one type are very close together in terms of their electrical properties. In crossovers, the left and right channels therefore work virtually identically: crossover frequencies, level ratios and phase positions match closely. This is the basis for stable, precise stereo imaging and reproducible results — in series production and also after service.

Tonal Effects

• precise, stable soundstage without drifting
• Coherent overall impression: left and right channels fuse into a single, seamless whole
• characteristic sound is reliably retained even after component replacement/repair
• More stable virtual center and clearer spatial layering

Air coils

Air coils are the uncompromising reference: maximally linear, without distortions caused by the core. They deliver maximum impulse fidelity and particularly natural, open playback. If space and a sufficiently low DC resistance are possible, air is the first choice.

OFC Copper

• Purity: at least 99.995% Cu, often 99.999% (4N) or higher
• Feature: almost oxygen-free (typically <10 ppm)
• Result: more stable grain boundaries, less oxide formation, more uniform electron flow

Baked Varnish Wire/ Resin Soaking

Baked varnish wire is enamel-insulated wire with an additional, activatable hot-melt outer layer, which has an adhesive effect when heated. The windings are thus fixed together.

Impact in practice

• The coil becomes mechanically stable and „works“ significantly less
• Micro-movements between windings are reduced
• In particular, this reduces macro-microphonic effects (the windings „work“ less) and increases “silence” during operation

Resin soaking as an alternative to baked varnish wire

If no baked lacquer wire is used, resin soaking carried out under vacuum can take over the mechanical fixing. The resin penetrates into the wrap, reduces cavities and degrees of freedom of movement and transforms the wrap into a stable compound. The result: significantly less macro microphones and an overall quieter, more precise operation of the coil.

Tight Tolerances

Tight tolerances in capacitance, inductance, and resistance ensure that capacitors of one type are very close together in terms of their electrical properties. In crossovers, the left and right channels therefore work virtually identically: crossover frequencies, level ratios and phase positions match closely. This is the basis for stable, precise stereo imaging and reproducible results — in series production and also after service.

Tonal Effects

• precise, stable soundstage without drifting
• Coherent overall impression: left and right channels fuse into a single, seamless whole
• characteristic sound is reliably retained even after component replacement/repair
• More stable virtual center and clearer spatial layering

Air coils

Air coils are the uncompromising reference: maximally linear, without distortions caused by the core. They deliver maximum impulse fidelity and particularly natural, open playback. If space and a sufficiently low DC resistance are possible, air is the first choice.

OFC Copper

• Purity: at least 99.995% Cu, often 99.999% (4N) or higher
• Feature: almost oxygen-free (typically <10 ppm)
• Result: more stable grain boundaries, less oxide formation, more uniform electron flow

Baked Varnish Wire/ Resin Soaking

Baked varnish wire is enamel-insulated wire with an additional, activatable hot-melt outer layer, which has an adhesive effect when heated. The windings are thus fixed together.

Impact in practice

• The coil becomes mechanically stable and „works“ significantly less
• Micro-movements between windings are reduced
• In particular, this reduces macro-microphonic effects (the windings „work“ less) and increases “silence” during operation

Resin soaking as an alternative to baked varnish wire

If no baked lacquer wire is used, resin soaking carried out under vacuum can take over the mechanical fixing. The resin penetrates into the wrap, reduces cavities and degrees of freedom of movement and transforms the wrap into a stable compound. The result: significantly less macro microphones and an overall quieter, more precise operation of the coil.

Rectangular Wire

Structurally much more dimensionally stable than traditional round wire. Its geometry allows it to be wound more tightly, enabling a lower R_DC and more compact dimensions while maintaining the same inductance.

At the same time, the higher stiffness reduces the mechanical movement of the coil under load. This reduces macro-microphony and prevents coil vibrations from feeding back into the music signal as unwanted components.

The result: greater control, more tranquility, and a clearer rendering of dynamics.

Tight Tolerances

Tight tolerances in capacitance, inductance, and resistance ensure that capacitors of one type are very close together in terms of their electrical properties. In crossovers, the left and right channels therefore work virtually identically: crossover frequencies, level ratios and phase positions match closely. This is the basis for stable, precise stereo imaging and reproducible results — in series production and also after service.

Tonal Effects

• precise, stable soundstage without drifting
• Coherent overall impression: left and right channels fuse into a single, seamless whole
• characteristic sound is reliably retained even after component replacement/repair
• More stable virtual center and clearer spatial layering

Air coils

Air coils are the uncompromising reference: maximally linear, without distortions caused by the core. They deliver maximum impulse fidelity and particularly natural, open playback. If space and a sufficiently low DC resistance are possible, air is the first choice.

OFC Copper

• Purity: at least 99.995% Cu, often 99.999% (4N) or higher
• Feature: almost oxygen-free (typically <10 ppm)
• Result: more stable grain boundaries, less oxide formation, more uniform electron flow

Baked Varnish Wire/ Resin Soaking

Baked varnish wire is enamel-insulated wire with an additional, activatable hot-melt outer layer, which has an adhesive effect when heated. The windings are thus fixed together.

Impact in practice

• The coil becomes mechanically stable and „works“ significantly less
• Micro-movements between windings are reduced
• In particular, this reduces macro-microphonic effects (the windings „work“ less) and increases “silence” during operation

Resin soaking as an alternative to baked varnish wire

If no baked lacquer wire is used, resin soaking carried out under vacuum can take over the mechanical fixing. The resin penetrates into the wrap, reduces cavities and degrees of freedom of movement and transforms the wrap into a stable compound. The result: significantly less macro microphones and an overall quieter, more precise operation of the coil.

Tight Tolerances

Tight tolerances in capacitance, inductance, and resistance ensure that capacitors of one type are very close together in terms of their electrical properties. In crossovers, the left and right channels therefore work virtually identically: crossover frequencies, level ratios and phase positions match closely. This is the basis for stable, precise stereo imaging and reproducible results — in series production and also after service.

Tonal Effects

• precise, stable soundstage without drifting
• Coherent overall impression: left and right channels fuse into a single, seamless whole
• characteristic sound is reliably retained even after component replacement/repair
• More stable virtual center and clearer spatial layering

Air coils

Air coils are the uncompromising reference: maximally linear, without distortions caused by the core. They deliver maximum impulse fidelity and particularly natural, open playback. If space and a sufficiently low DC resistance are possible, air is the first choice.

OFC Copper

• Purity: at least 99.995% Cu, often 99.999% (4N) or higher
• Feature: almost oxygen-free (typically <10 ppm)
• Result: more stable grain boundaries, less oxide formation, more uniform electron flow

Baked Varnish Wire/ Resin Soaking

Baked varnish wire is enamel-insulated wire with an additional, activatable hot-melt outer layer, which has an adhesive effect when heated. The windings are thus fixed together.

Impact in practice

• The coil becomes mechanically stable and „works“ significantly less
• Micro-movements between windings are reduced
• In particular, this reduces macro-microphonic effects (the windings „work“ less) and increases “silence” during operation

Resin soaking as an alternative to baked varnish wire

If no baked lacquer wire is used, resin soaking carried out under vacuum can take over the mechanical fixing. The resin penetrates into the wrap, reduces cavities and degrees of freedom of movement and transforms the wrap into a stable compound. The result: significantly less macro microphones and an overall quieter, more precise operation of the coil.

Rectangular Wire

Structurally much more dimensionally stable than traditional round wire. Its geometry allows it to be wound more tightly, enabling a lower R_DC and more compact dimensions while maintaining the same inductance.

At the same time, the higher stiffness reduces the mechanical movement of the coil under load. This reduces macro-microphony and prevents coil vibrations from feeding back into the music signal as unwanted components.

The result: greater control, more tranquility, and a clearer rendering of dynamics.

Tight Tolerances

Tight tolerances in capacitance, inductance, and resistance ensure that capacitors of one type are very close together in terms of their electrical properties. In crossovers, the left and right channels therefore work virtually identically: crossover frequencies, level ratios and phase positions match closely. This is the basis for stable, precise stereo imaging and reproducible results — in series production and also after service.

Tonal Effects

• precise, stable soundstage without drifting
• Coherent overall impression: left and right channels fuse into a single, seamless whole
• characteristic sound is reliably retained even after component replacement/repair
• More stable virtual center and clearer spatial layering

Baked Varnish Wire/ Resin Soaking

Baked varnish wire is enamel-insulated wire with an additional, activatable hot-melt outer layer, which has an adhesive effect when heated. The windings are thus fixed together.

Impact in practice

• The coil becomes mechanically stable and „works“ significantly less
• Micro-movements between windings are reduced
• In particular, this reduces macro-microphonic effects (the windings „work“ less) and increases “silence” during operation

Resin soaking as an alternative to baked varnish wire

If no baked lacquer wire is used, resin soaking carried out under vacuum can take over the mechanical fixing. The resin penetrates into the wrap, reduces cavities and degrees of freedom of movement and transforms the wrap into a stable compound. The result: significantly less macro microphones and an overall quieter, more precise operation of the coil.

Air coils

Air coils are the uncompromising reference: maximally linear, without distortions caused by the core. They deliver maximum impulse fidelity and particularly natural, open playback. If space and a sufficiently low DC resistance are possible, air is the first choice.

OFC Copper

• Purity: at least 99.995% Cu, often 99.999% (4N) or higher
• Feature: almost oxygen-free (typically <10 ppm)
• Result: more stable grain boundaries, less oxide formation, more uniform electron flow

Tight Tolerances

Tight tolerances in capacitance, inductance, and resistance ensure that capacitors of one type are very close together in terms of their electrical properties. In crossovers, the left and right channels therefore work virtually identically: crossover frequencies, level ratios and phase positions match closely. This is the basis for stable, precise stereo imaging and reproducible results — in series production and also after service.

Tonal Effects

• precise, stable soundstage without drifting
• Coherent overall impression: left and right channels fuse into a single, seamless whole
• characteristic sound is reliably retained even after component replacement/repair
• More stable virtual center and clearer spatial layering

Baked Varnish Wire/ Resin Soaking

Baked varnish wire is enamel-insulated wire with an additional, activatable hot-melt outer layer, which has an adhesive effect when heated. The windings are thus fixed together.

Impact in practice

• The coil becomes mechanically stable and „works“ significantly less
• Micro-movements between windings are reduced
• In particular, this reduces macro-microphonic effects (the windings „work“ less) and increases “silence” during operation

Resin soaking as an alternative to baked varnish wire

If no baked lacquer wire is used, resin soaking carried out under vacuum can take over the mechanical fixing. The resin penetrates into the wrap, reduces cavities and degrees of freedom of movement and transforms the wrap into a stable compound. The result: significantly less macro microphones and an overall quieter, more precise operation of the coil.

Air coils

Air coils are the uncompromising reference: maximally linear, without distortions caused by the core. They deliver maximum impulse fidelity and particularly natural, open playback. If space and a sufficiently low DC resistance are possible, air is the first choice.

OFC Copper

• Purity: at least 99.995% Cu, often 99.999% (4N) or higher
• Feature: almost oxygen-free (typically <10 ppm)
• Result: more stable grain boundaries, less oxide formation, more uniform electron flow

Tight Tolerances

Tight tolerances in capacitance, inductance, and resistance ensure that capacitors of one type are very close together in terms of their electrical properties. In crossovers, the left and right channels therefore work virtually identically: crossover frequencies, level ratios and phase positions match closely. This is the basis for stable, precise stereo imaging and reproducible results — in series production and also after service.

Tonal Effects

• precise, stable soundstage without drifting
• Coherent overall impression: left and right channels fuse into a single, seamless whole
• characteristic sound is reliably retained even after component replacement/repair
• More stable virtual center and clearer spatial layering

Baked Varnish Wire/ Resin Soaking

Baked varnish wire is enamel-insulated wire with an additional, activatable hot-melt outer layer, which has an adhesive effect when heated. The windings are thus fixed together.

Impact in practice

• The coil becomes mechanically stable and „works“ significantly less
• Micro-movements between windings are reduced
• In particular, this reduces macro-microphonic effects (the windings „work“ less) and increases “silence” during operation

Resin soaking as an alternative to baked varnish wire

If no baked lacquer wire is used, resin soaking carried out under vacuum can take over the mechanical fixing. The resin penetrates into the wrap, reduces cavities and degrees of freedom of movement and transforms the wrap into a stable compound. The result: significantly less macro microphones and an overall quieter, more precise operation of the coil.

Air coils

Air coils are the uncompromising reference: maximally linear, without distortions caused by the core. They deliver maximum impulse fidelity and particularly natural, open playback. If space and a sufficiently low DC resistance are possible, air is the first choice.

OFC Copper

• Purity: at least 99.995% Cu, often 99.999% (4N) or higher
• Feature: almost oxygen-free (typically <10 ppm)
• Result: more stable grain boundaries, less oxide formation, more uniform electron flow

Tight Tolerances

Tight tolerances in capacitance, inductance, and resistance ensure that capacitors of one type are very close together in terms of their electrical properties. In crossovers, the left and right channels therefore work virtually identically: crossover frequencies, level ratios and phase positions match closely. This is the basis for stable, precise stereo imaging and reproducible results — in series production and also after service.

Tonal Effects

• precise, stable soundstage without drifting
• Coherent overall impression: left and right channels fuse into a single, seamless whole
• characteristic sound is reliably retained even after component replacement/repair
• More stable virtual center and clearer spatial layering

Baked Varnish Wire/ Resin Soaking

Baked varnish wire is enamel-insulated wire with an additional, activatable hot-melt outer layer, which has an adhesive effect when heated. The windings are thus fixed together.

Impact in practice

• The coil becomes mechanically stable and „works“ significantly less
• Micro-movements between windings are reduced
• In particular, this reduces macro-microphonic effects (the windings „work“ less) and increases “silence” during operation

Resin soaking as an alternative to baked varnish wire

If no baked lacquer wire is used, resin soaking carried out under vacuum can take over the mechanical fixing. The resin penetrates into the wrap, reduces cavities and degrees of freedom of movement and transforms the wrap into a stable compound. The result: significantly less macro microphones and an overall quieter, more precise operation of the coil.

Air coils

Air coils are the uncompromising reference: maximally linear, without distortions caused by the core. They deliver maximum impulse fidelity and particularly natural, open playback. If space and a sufficiently low DC resistance are possible, air is the first choice.

OFC Copper

• Purity: at least 99.995% Cu, often 99.999% (4N) or higher
• Feature: almost oxygen-free (typically <10 ppm)
• Result: more stable grain boundaries, less oxide formation, more uniform electron flow

Tight Tolerances

Tight tolerances in capacitance, inductance, and resistance ensure that capacitors of one type are very close together in terms of their electrical properties. In crossovers, the left and right channels therefore work virtually identically: crossover frequencies, level ratios and phase positions match closely. This is the basis for stable, precise stereo imaging and reproducible results — in series production and also after service.

Tonal Effects

• precise, stable soundstage without drifting
• Coherent overall impression: left and right channels fuse into a single, seamless whole
• characteristic sound is reliably retained even after component replacement/repair
• More stable virtual center and clearer spatial layering

Air coils

Air coils are the uncompromising reference: maximally linear, without distortions caused by the core. They deliver maximum impulse fidelity and particularly natural, open playback. If space and a sufficiently low DC resistance are possible, air is the first choice.

OFC Copper

• Purity: at least 99.995% Cu, often 99.999% (4N) or higher
• Feature: almost oxygen-free (typically <10 ppm)
• Result: more stable grain boundaries, less oxide formation, more uniform electron flow