MCap SUPREME EVO Alu Oil

Aluminum metallization (100% aluminum instead of zinc-aluminum mixture)

Pure aluminum metallization replaces the zinc-aluminum mixture commonly used in industry with a homogeneous metal structure. This reduces interface effects at the grain boundaries , stabilizes the conductivity across the electrode surface and results in a significantly quieter noise spectrum. For example, the basic design of an MCap is audibly different from typical industrial capacitors.

Tonal Effects

• Darker, quieter background — subtle artifacts recede
• Clearer, clearer stage without rough-metallic side effects
• Quiet, well-defined overall sound — a real introduction to audiophile quality

Vacuum Oil Impregnation

Vacuum oil impregnation involves displacing air from the coil and drawing a special oil — whose dielectric and hydromechanical properties optimize the desired acoustic characteristics of the coil structure — into every pore under a vacuum. The oil wets film and paper surfaces, stabilizes the wrap from the inside and dampens extensive movements — macro microphony is reduced deep in the wrap structure. In this way, the capacitor remains mechanically quiet even with high pulses and dynamics and does not falsify the music signal through its own movements.

Tonal effects

• Reverb decays, fading processes and quiet room information are more prominent because the wrap inside is calmed down
• Even with high dynamics, the sound remains calm and orderly; loud passages do not drown out the quieter details
• Transients (blowing noises, string strokes, cymbal impulses) come precisely, completely and without sharpness
• Overall impression: relaxed, controlled and at the same time exceptionally detailed

The Supreme Wrapping Technology

A trump card in the world of Macro-Microphony and electrotechnical parameters

The Supreme wrapping technology sets up two coils with double target capacity and connects them in series internally. This increases mass and internal damping, distributes field forces across two structures and thus reduces macro microphonies very effectively. At the same time, the residual inductance drops to around a quarter of a comparable single coil — fast transients and impulses are transmitted cleanly and in a controlled manner.

Tonal effects

• Superior peace of mind even with very large amounts of energy — the condenser remains mechanically “silent”
• Attack, transients and rhythmic subtleties come quickly, precisely and without procrastination
• Microstructures (overtone trajectories, quiet space, fine movements) are clearly audible without having a clinical effect
• Large, relaxed stage with high fine-detail resolution — like a very good concert hall seat

Evo Winding Geometry

The Evo winding geometry uses many narrow turns of the electrode foils, with end-face contacts, instead of a few wide layers. As a result, current paths are shortened and the power distribution over the entire winding surface is significantly more homogeneous. This not only significantly lowers the equivalent series inductance (ESL), but also the equivalent series resistance (ESR) — the capacitor processes transients faster, in a more controlled manner and at the same time remains mechanically more stable and less susceptible to mechanical resonances. The result is a precise, focused and stress-free listening experience that remains organized even with complex music.

Tonal effects

• more precise transients and clear rhythmic structure
• More stable center, clearer localisation and a more focused soundstage
• better transparency in dense, complex music
• more control and sovereignty even at higher levels
• stress-free precision without nervousness
• clean microdetails without temporal smearing

Reinforced Metallization

Reinforced metallization means a deliberately thicker metal layer on the insulation film. As a result, the resistance of the electrode tracks drops significantly, conductivity increases, voltage drops and local heating are reduced, and field gradients are flattened. The capacitor remains stable under pulses and high current peaks because the electrode does not become a limiting factor: energy is available more quickly and in a more controlled manner, capacity and losses remain more constant even under load, and signal-related modulations in the metal grid are reduced. The result is superior, powerful and clean transmission behavior — even if it becomes dynamic.

Tonal effects

• controlled, powerful and clear even at peak levels
• Bass and drum impulses with more authority and drawing
• more stable sound without electrode-side “flickering”
• more peace and order in complex, dynamic passages

Encapsulation in a housing with visco-elastic sealing compound

Encapsulation in a housing with visco-elastic sealing compound means: The capacitor wrap is mechanically calmed and permanently fixed in the fixed housing — not only against external vibrations, but also against stimulation from the music signal itself. This is because alternating current generates field forces that can set the winding in motion; this is precisely what causes macro-microphonic feedback when the capacitor winding resonates. The encapsulation prevents this feedback from building up: coupled energy is absorbed by the viscoelastic layer, resonances are widely dispersed and their amplitude is reduced – resonance peaks are effectively eliminated.

Tonal effects

• Stable, relaxed stage even at high levels — the capacitor remains “silent”
• Clear location: Voices and instruments retain their shape and position
• Less housing noise and structure-borne noise — the sound appears sorted and focused
• More audibility: quiet room information and fine details are retained even when dynamic