Aluminum metallization (100% aluminum instead of zinc-aluminum mixture)

Pure aluminum metallization replaces the zinc-aluminum mixture commonly used in industry with a homogeneous metal structure. This reduces interface effects at the grain boundaries , stabilizes the conductivity across the electrode surface and results in a significantly quieter noise spectrum. For example, the basic design of an MCap is audibly different from typical industrial capacitors.

Tonal Effects

• Darker, quieter background — subtle artifacts recede
• Clearer, clearer stage without rough-metallic side effects
• Quiet, well-defined overall sound — a real introduction to audiophile quality

Silver – Gold Metallization (Ag – Au)

The Silver-Gold Metallization combines the maximum conductivity of silver with the interfacial stability of gold. Silver provides precise, finely resolved signal routing with very low noise; gold stabilizes grain boundaries, slows down diffusion and smooths the microspectrum — particularly with small signals and over a long period of time.

Tonal effects

• Finer texture and more stable reproduction of the smallest details (overtones, spatial fractions, fading processes)
• Richer, differentiated timbres with a clear outline — colorful but ordered
• Quieter, more “mature” overall impression: less nervousness, high long-term suitability
• Noticeably more heart, rhythm and joy of playing with insight and precision

Vacuum Oil Impregnation

Vacuum oil impregnation involves displacing air from the coil and drawing a special oil — whose dielectric and hydromechanical properties optimize the desired acoustic characteristics of the coil structure — into every pore under a vacuum. The oil wets film and paper surfaces, stabilizes the wrap from the inside and dampens extensive movements — macro microphony is reduced deep in the wrap structure. In this way, the capacitor remains mechanically quiet even with high pulses and dynamics and does not falsify the music signal through its own movements.

Tonal effects

• Reverb decays, fading processes and quiet room information are more prominent because the wrap inside is calmed down
• Even with high dynamics, the sound remains calm and orderly; loud passages do not drown out the quieter details
• Transients (blowing noises, string strokes, cymbal impulses) come precisely, completely and without sharpness
• Overall impression: relaxed, controlled and at the same time exceptionally detailed

Silver Metallization (Ag)

Silver metallization uses maximum conductivity and long free path lengths for electrons — fewer active microcontacts, less 1/f noise. Larger particle sizes and lower interference voltages at the grain boundaries result in particularly quiet micro-microphonic behavior, which transmits the smallest levels and high frequencies very finely and stably.

Tonal effects

• More insight: Details, overtones and room information are more clearly visible
• More stable stage and more precise positioning, especially in the tweeter/super tweeter
• Vocal, string and cymbal textures look finer and more complete
• Transients come faster without looking sharp or strained
• Embedded in a calm construction, the result is a transparent resolution with a calm, orderly background

The Supreme Wrapping Technology

A trump card in the world of Macro-Microphony and electrotechnical parameters

The Supreme wrapping technology sets up two coils with double target capacity and connects them in series internally. This increases mass and internal damping, distributes field forces across two structures and thus reduces macro microphonies very effectively. At the same time, the residual inductance drops to around a quarter of a comparable single coil — fast transients and impulses are transmitted cleanly and in a controlled manner.

Tonal effects

• Superior peace of mind even with very large amounts of energy — the condenser remains mechanically “silent”
• Attack, transients and rhythmic subtleties come quickly, precisely and without procrastination
• Microstructures (overtone trajectories, quiet space, fine movements) are clearly audible without having a clinical effect
• Large, relaxed stage with high fine-detail resolution — like a very good concert hall seat

Aluminum metallization (100% aluminum instead of zinc-aluminum mixture)

Pure aluminum metallization replaces the zinc-aluminum mixture commonly used in industry with a homogeneous metal structure. This reduces interface effects at the grain boundaries , stabilizes the conductivity across the electrode surface and results in a significantly quieter noise spectrum. For example, the basic design of an MCap is audibly different from typical industrial capacitors.

Tonal Effects

• Darker, quieter background — subtle artifacts recede
• Clearer, clearer stage without rough-metallic side effects
• Quiet, well-defined overall sound — a real introduction to audiophile quality

Silver – Gold Metallization (Ag – Au)

The Silver-Gold Metallization combines the maximum conductivity of silver with the interfacial stability of gold. Silver provides precise, finely resolved signal routing with very low noise; gold stabilizes grain boundaries, slows down diffusion and smooths the microspectrum — particularly with small signals and over a long period of time.

Tonal effects

• Finer texture and more stable reproduction of the smallest details (overtones, spatial fractions, fading processes)
• Richer, differentiated timbres with a clear outline — colorful but ordered
• Quieter, more “mature” overall impression: less nervousness, high long-term suitability
• Noticeably more heart, rhythm and joy of playing with insight and precision

Vacuum Oil Impregnation

Vacuum oil impregnation involves displacing air from the coil and drawing a special oil — whose dielectric and hydromechanical properties optimize the desired acoustic characteristics of the coil structure — into every pore under a vacuum. The oil wets film and paper surfaces, stabilizes the wrap from the inside and dampens extensive movements — macro microphony is reduced deep in the wrap structure. In this way, the capacitor remains mechanically quiet even with high pulses and dynamics and does not falsify the music signal through its own movements.

Tonal effects

• Reverb decays, fading processes and quiet room information are more prominent because the wrap inside is calmed down
• Even with high dynamics, the sound remains calm and orderly; loud passages do not drown out the quieter details
• Transients (blowing noises, string strokes, cymbal impulses) come precisely, completely and without sharpness
• Overall impression: relaxed, controlled and at the same time exceptionally detailed

Silver Metallization (Ag)

Silver metallization uses maximum conductivity and long free path lengths for electrons — fewer active microcontacts, less 1/f noise. Larger particle sizes and lower interference voltages at the grain boundaries result in particularly quiet micro-microphonic behavior, which transmits the smallest levels and high frequencies very finely and stably.

Tonal effects

• More insight: Details, overtones and room information are more clearly visible
• More stable stage and more precise positioning, especially in the tweeter/super tweeter
• Vocal, string and cymbal textures look finer and more complete
• Transients come faster without looking sharp or strained
• Embedded in a calm construction, the result is a transparent resolution with a calm, orderly background

The Supreme Wrapping Technology

A trump card in the world of Macro-Microphony and electrotechnical parameters

The Supreme wrapping technology sets up two coils with double target capacity and connects them in series internally. This increases mass and internal damping, distributes field forces across two structures and thus reduces macro microphonies very effectively. At the same time, the residual inductance drops to around a quarter of a comparable single coil — fast transients and impulses are transmitted cleanly and in a controlled manner.

Tonal effects

• Superior peace of mind even with very large amounts of energy — the condenser remains mechanically “silent”
• Attack, transients and rhythmic subtleties come quickly, precisely and without procrastination
• Microstructures (overtone trajectories, quiet space, fine movements) are clearly audible without having a clinical effect
• Large, relaxed stage with high fine-detail resolution — like a very good concert hall seat

Aluminum metallization (100% aluminum instead of zinc-aluminum mixture)

Pure aluminum metallization replaces the zinc-aluminum mixture commonly used in industry with a homogeneous metal structure. This reduces interface effects at the grain boundaries , stabilizes the conductivity across the electrode surface and results in a significantly quieter noise spectrum. For example, the basic design of an MCap is audibly different from typical industrial capacitors.

Tonal Effects

• Darker, quieter background — subtle artifacts recede
• Clearer, clearer stage without rough-metallic side effects
• Quiet, well-defined overall sound — a real introduction to audiophile quality

Silver – Gold Metallization (Ag – Au)

The Silver-Gold Metallization combines the maximum conductivity of silver with the interfacial stability of gold. Silver provides precise, finely resolved signal routing with very low noise; gold stabilizes grain boundaries, slows down diffusion and smooths the microspectrum — particularly with small signals and over a long period of time.

Tonal effects

• Finer texture and more stable reproduction of the smallest details (overtones, spatial fractions, fading processes)
• Richer, differentiated timbres with a clear outline — colorful but ordered
• Quieter, more “mature” overall impression: less nervousness, high long-term suitability
• Noticeably more heart, rhythm and joy of playing with insight and precision

Vacuum Oil Impregnation

Vacuum oil impregnation involves displacing air from the coil and drawing a special oil — whose dielectric and hydromechanical properties optimize the desired acoustic characteristics of the coil structure — into every pore under a vacuum. The oil wets film and paper surfaces, stabilizes the wrap from the inside and dampens extensive movements — macro microphony is reduced deep in the wrap structure. In this way, the capacitor remains mechanically quiet even with high pulses and dynamics and does not falsify the music signal through its own movements.

Tonal effects

• Reverb decays, fading processes and quiet room information are more prominent because the wrap inside is calmed down
• Even with high dynamics, the sound remains calm and orderly; loud passages do not drown out the quieter details
• Transients (blowing noises, string strokes, cymbal impulses) come precisely, completely and without sharpness
• Overall impression: relaxed, controlled and at the same time exceptionally detailed

Silver Metallization (Ag)

Silver metallization uses maximum conductivity and long free path lengths for electrons — fewer active microcontacts, less 1/f noise. Larger particle sizes and lower interference voltages at the grain boundaries result in particularly quiet micro-microphonic behavior, which transmits the smallest levels and high frequencies very finely and stably.

Tonal effects

• More insight: Details, overtones and room information are more clearly visible
• More stable stage and more precise positioning, especially in the tweeter/super tweeter
• Vocal, string and cymbal textures look finer and more complete
• Transients come faster without looking sharp or strained
• Embedded in a calm construction, the result is a transparent resolution with a calm, orderly background

The Supreme Wrapping Technology

A trump card in the world of Macro-Microphony and electrotechnical parameters

The Supreme wrapping technology sets up two coils with double target capacity and connects them in series internally. This increases mass and internal damping, distributes field forces across two structures and thus reduces macro microphonies very effectively. At the same time, the residual inductance drops to around a quarter of a comparable single coil — fast transients and impulses are transmitted cleanly and in a controlled manner.

Tonal effects

• Superior peace of mind even with very large amounts of energy — the condenser remains mechanically “silent”
• Attack, transients and rhythmic subtleties come quickly, precisely and without procrastination
• Microstructures (overtone trajectories, quiet space, fine movements) are clearly audible without having a clinical effect
• Large, relaxed stage with high fine-detail resolution — like a very good concert hall seat

Aluminum metallization (100% aluminum instead of zinc-aluminum mixture)

Pure aluminum metallization replaces the zinc-aluminum mixture commonly used in industry with a homogeneous metal structure. This reduces interface effects at the grain boundaries , stabilizes the conductivity across the electrode surface and results in a significantly quieter noise spectrum. For example, the basic design of an MCap is audibly different from typical industrial capacitors.

Tonal Effects

• Darker, quieter background — subtle artifacts recede
• Clearer, clearer stage without rough-metallic side effects
• Quiet, well-defined overall sound — a real introduction to audiophile quality

Silver – Gold Metallization (Ag – Au)

The Silver-Gold Metallization combines the maximum conductivity of silver with the interfacial stability of gold. Silver provides precise, finely resolved signal routing with very low noise; gold stabilizes grain boundaries, slows down diffusion and smooths the microspectrum — particularly with small signals and over a long period of time.

Tonal effects

• Finer texture and more stable reproduction of the smallest details (overtones, spatial fractions, fading processes)
• Richer, differentiated timbres with a clear outline — colorful but ordered
• Quieter, more “mature” overall impression: less nervousness, high long-term suitability
• Noticeably more heart, rhythm and joy of playing with insight and precision

Vacuum Oil Impregnation

Vacuum oil impregnation involves displacing air from the coil and drawing a special oil — whose dielectric and hydromechanical properties optimize the desired acoustic characteristics of the coil structure — into every pore under a vacuum. The oil wets film and paper surfaces, stabilizes the wrap from the inside and dampens extensive movements — macro microphony is reduced deep in the wrap structure. In this way, the capacitor remains mechanically quiet even with high pulses and dynamics and does not falsify the music signal through its own movements.

Tonal effects

• Reverb decays, fading processes and quiet room information are more prominent because the wrap inside is calmed down
• Even with high dynamics, the sound remains calm and orderly; loud passages do not drown out the quieter details
• Transients (blowing noises, string strokes, cymbal impulses) come precisely, completely and without sharpness
• Overall impression: relaxed, controlled and at the same time exceptionally detailed

Silver Metallization (Ag)

Silver metallization uses maximum conductivity and long free path lengths for electrons — fewer active microcontacts, less 1/f noise. Larger particle sizes and lower interference voltages at the grain boundaries result in particularly quiet micro-microphonic behavior, which transmits the smallest levels and high frequencies very finely and stably.

Tonal effects

• More insight: Details, overtones and room information are more clearly visible
• More stable stage and more precise positioning, especially in the tweeter/super tweeter
• Vocal, string and cymbal textures look finer and more complete
• Transients come faster without looking sharp or strained
• Embedded in a calm construction, the result is a transparent resolution with a calm, orderly background

The Supreme Wrapping Technology

A trump card in the world of Macro-Microphony and electrotechnical parameters

The Supreme wrapping technology sets up two coils with double target capacity and connects them in series internally. This increases mass and internal damping, distributes field forces across two structures and thus reduces macro microphonies very effectively. At the same time, the residual inductance drops to around a quarter of a comparable single coil — fast transients and impulses are transmitted cleanly and in a controlled manner.

Tonal effects

• Superior peace of mind even with very large amounts of energy — the condenser remains mechanically “silent”
• Attack, transients and rhythmic subtleties come quickly, precisely and without procrastination
• Microstructures (overtone trajectories, quiet space, fine movements) are clearly audible without having a clinical effect
• Large, relaxed stage with high fine-detail resolution — like a very good concert hall seat

Aluminum metallization (100% aluminum instead of zinc-aluminum mixture)

Pure aluminum metallization replaces the zinc-aluminum mixture commonly used in industry with a homogeneous metal structure. This reduces interface effects at the grain boundaries , stabilizes the conductivity across the electrode surface and results in a significantly quieter noise spectrum. For example, the basic design of an MCap is audibly different from typical industrial capacitors.

Tonal Effects

• Darker, quieter background — subtle artifacts recede
• Clearer, clearer stage without rough-metallic side effects
• Quiet, well-defined overall sound — a real introduction to audiophile quality

Silver – Gold Metallization (Ag – Au)

The Silver-Gold Metallization combines the maximum conductivity of silver with the interfacial stability of gold. Silver provides precise, finely resolved signal routing with very low noise; gold stabilizes grain boundaries, slows down diffusion and smooths the microspectrum — particularly with small signals and over a long period of time.

Tonal effects

• Finer texture and more stable reproduction of the smallest details (overtones, spatial fractions, fading processes)
• Richer, differentiated timbres with a clear outline — colorful but ordered
• Quieter, more “mature” overall impression: less nervousness, high long-term suitability
• Noticeably more heart, rhythm and joy of playing with insight and precision

Vacuum Oil Impregnation

Vacuum oil impregnation involves displacing air from the coil and drawing a special oil — whose dielectric and hydromechanical properties optimize the desired acoustic characteristics of the coil structure — into every pore under a vacuum. The oil wets film and paper surfaces, stabilizes the wrap from the inside and dampens extensive movements — macro microphony is reduced deep in the wrap structure. In this way, the capacitor remains mechanically quiet even with high pulses and dynamics and does not falsify the music signal through its own movements.

Tonal effects

• Reverb decays, fading processes and quiet room information are more prominent because the wrap inside is calmed down
• Even with high dynamics, the sound remains calm and orderly; loud passages do not drown out the quieter details
• Transients (blowing noises, string strokes, cymbal impulses) come precisely, completely and without sharpness
• Overall impression: relaxed, controlled and at the same time exceptionally detailed

Silver Metallization (Ag)

Silver metallization uses maximum conductivity and long free path lengths for electrons — fewer active microcontacts, less 1/f noise. Larger particle sizes and lower interference voltages at the grain boundaries result in particularly quiet micro-microphonic behavior, which transmits the smallest levels and high frequencies very finely and stably.

Tonal effects

• More insight: Details, overtones and room information are more clearly visible
• More stable stage and more precise positioning, especially in the tweeter/super tweeter
• Vocal, string and cymbal textures look finer and more complete
• Transients come faster without looking sharp or strained
• Embedded in a calm construction, the result is a transparent resolution with a calm, orderly background

The Supreme Wrapping Technology

A trump card in the world of Macro-Microphony and electrotechnical parameters

The Supreme wrapping technology sets up two coils with double target capacity and connects them in series internally. This increases mass and internal damping, distributes field forces across two structures and thus reduces macro microphonies very effectively. At the same time, the residual inductance drops to around a quarter of a comparable single coil — fast transients and impulses are transmitted cleanly and in a controlled manner.

Tonal effects

• Superior peace of mind even with very large amounts of energy — the condenser remains mechanically “silent”
• Attack, transients and rhythmic subtleties come quickly, precisely and without procrastination
• Microstructures (overtone trajectories, quiet space, fine movements) are clearly audible without having a clinical effect
• Large, relaxed stage with high fine-detail resolution — like a very good concert hall seat

Aluminum metallization (100% aluminum instead of zinc-aluminum mixture)

Pure aluminum metallization replaces the zinc-aluminum mixture commonly used in industry with a homogeneous metal structure. This reduces interface effects at the grain boundaries , stabilizes the conductivity across the electrode surface and results in a significantly quieter noise spectrum. For example, the basic design of an MCap is audibly different from typical industrial capacitors.

Tonal Effects

• Darker, quieter background — subtle artifacts recede
• Clearer, clearer stage without rough-metallic side effects
• Quiet, well-defined overall sound — a real introduction to audiophile quality

Silver – Gold Metallization (Ag – Au)

The Silver-Gold Metallization combines the maximum conductivity of silver with the interfacial stability of gold. Silver provides precise, finely resolved signal routing with very low noise; gold stabilizes grain boundaries, slows down diffusion and smooths the microspectrum — particularly with small signals and over a long period of time.

Tonal effects

• Finer texture and more stable reproduction of the smallest details (overtones, spatial fractions, fading processes)
• Richer, differentiated timbres with a clear outline — colorful but ordered
• Quieter, more “mature” overall impression: less nervousness, high long-term suitability
• Noticeably more heart, rhythm and joy of playing with insight and precision

Vacuum Oil Impregnation

Vacuum oil impregnation involves displacing air from the coil and drawing a special oil — whose dielectric and hydromechanical properties optimize the desired acoustic characteristics of the coil structure — into every pore under a vacuum. The oil wets film and paper surfaces, stabilizes the wrap from the inside and dampens extensive movements — macro microphony is reduced deep in the wrap structure. In this way, the capacitor remains mechanically quiet even with high pulses and dynamics and does not falsify the music signal through its own movements.

Tonal effects

• Reverb decays, fading processes and quiet room information are more prominent because the wrap inside is calmed down
• Even with high dynamics, the sound remains calm and orderly; loud passages do not drown out the quieter details
• Transients (blowing noises, string strokes, cymbal impulses) come precisely, completely and without sharpness
• Overall impression: relaxed, controlled and at the same time exceptionally detailed

Silver Metallization (Ag)

Silver metallization uses maximum conductivity and long free path lengths for electrons — fewer active microcontacts, less 1/f noise. Larger particle sizes and lower interference voltages at the grain boundaries result in particularly quiet micro-microphonic behavior, which transmits the smallest levels and high frequencies very finely and stably.

Tonal effects

• More insight: Details, overtones and room information are more clearly visible
• More stable stage and more precise positioning, especially in the tweeter/super tweeter
• Vocal, string and cymbal textures look finer and more complete
• Transients come faster without looking sharp or strained
• Embedded in a calm construction, the result is a transparent resolution with a calm, orderly background

The Supreme Wrapping Technology

A trump card in the world of Macro-Microphony and electrotechnical parameters

The Supreme wrapping technology sets up two coils with double target capacity and connects them in series internally. This increases mass and internal damping, distributes field forces across two structures and thus reduces macro microphonies very effectively. At the same time, the residual inductance drops to around a quarter of a comparable single coil — fast transients and impulses are transmitted cleanly and in a controlled manner.

Tonal effects

• Superior peace of mind even with very large amounts of energy — the condenser remains mechanically “silent”
• Attack, transients and rhythmic subtleties come quickly, precisely and without procrastination
• Microstructures (overtone trajectories, quiet space, fine movements) are clearly audible without having a clinical effect
• Large, relaxed stage with high fine-detail resolution — like a very good concert hall seat

Aluminum metallization (100% aluminum instead of zinc-aluminum mixture)

Pure aluminum metallization replaces the zinc-aluminum mixture commonly used in industry with a homogeneous metal structure. This reduces interface effects at the grain boundaries , stabilizes the conductivity across the electrode surface and results in a significantly quieter noise spectrum. For example, the basic design of an MCap is audibly different from typical industrial capacitors.

Tonal Effects

• Darker, quieter background — subtle artifacts recede
• Clearer, clearer stage without rough-metallic side effects
• Quiet, well-defined overall sound — a real introduction to audiophile quality

Silver – Gold Metallization (Ag – Au)

The Silver-Gold Metallization combines the maximum conductivity of silver with the interfacial stability of gold. Silver provides precise, finely resolved signal routing with very low noise; gold stabilizes grain boundaries, slows down diffusion and smooths the microspectrum — particularly with small signals and over a long period of time.

Tonal effects

• Finer texture and more stable reproduction of the smallest details (overtones, spatial fractions, fading processes)
• Richer, differentiated timbres with a clear outline — colorful but ordered
• Quieter, more “mature” overall impression: less nervousness, high long-term suitability
• Noticeably more heart, rhythm and joy of playing with insight and precision

Vacuum Oil Impregnation

Vacuum oil impregnation involves displacing air from the coil and drawing a special oil — whose dielectric and hydromechanical properties optimize the desired acoustic characteristics of the coil structure — into every pore under a vacuum. The oil wets film and paper surfaces, stabilizes the wrap from the inside and dampens extensive movements — macro microphony is reduced deep in the wrap structure. In this way, the capacitor remains mechanically quiet even with high pulses and dynamics and does not falsify the music signal through its own movements.

Tonal effects

• Reverb decays, fading processes and quiet room information are more prominent because the wrap inside is calmed down
• Even with high dynamics, the sound remains calm and orderly; loud passages do not drown out the quieter details
• Transients (blowing noises, string strokes, cymbal impulses) come precisely, completely and without sharpness
• Overall impression: relaxed, controlled and at the same time exceptionally detailed

Silver Metallization (Ag)

Silver metallization uses maximum conductivity and long free path lengths for electrons — fewer active microcontacts, less 1/f noise. Larger particle sizes and lower interference voltages at the grain boundaries result in particularly quiet micro-microphonic behavior, which transmits the smallest levels and high frequencies very finely and stably.

Tonal effects

• More insight: Details, overtones and room information are more clearly visible
• More stable stage and more precise positioning, especially in the tweeter/super tweeter
• Vocal, string and cymbal textures look finer and more complete
• Transients come faster without looking sharp or strained
• Embedded in a calm construction, the result is a transparent resolution with a calm, orderly background

The Supreme Wrapping Technology

A trump card in the world of Macro-Microphony and electrotechnical parameters

The Supreme wrapping technology sets up two coils with double target capacity and connects them in series internally. This increases mass and internal damping, distributes field forces across two structures and thus reduces macro microphonies very effectively. At the same time, the residual inductance drops to around a quarter of a comparable single coil — fast transients and impulses are transmitted cleanly and in a controlled manner.

Tonal effects

• Superior peace of mind even with very large amounts of energy — the condenser remains mechanically “silent”
• Attack, transients and rhythmic subtleties come quickly, precisely and without procrastination
• Microstructures (overtone trajectories, quiet space, fine movements) are clearly audible without having a clinical effect
• Large, relaxed stage with high fine-detail resolution — like a very good concert hall seat

Aluminum metallization (100% aluminum instead of zinc-aluminum mixture)

Pure aluminum metallization replaces the zinc-aluminum mixture commonly used in industry with a homogeneous metal structure. This reduces interface effects at the grain boundaries , stabilizes the conductivity across the electrode surface and results in a significantly quieter noise spectrum. For example, the basic design of an MCap is audibly different from typical industrial capacitors.

Tonal Effects

• Darker, quieter background — subtle artifacts recede
• Clearer, clearer stage without rough-metallic side effects
• Quiet, well-defined overall sound — a real introduction to audiophile quality

Silver – Gold Metallization (Ag – Au)

The Silver-Gold Metallization combines the maximum conductivity of silver with the interfacial stability of gold. Silver provides precise, finely resolved signal routing with very low noise; gold stabilizes grain boundaries, slows down diffusion and smooths the microspectrum — particularly with small signals and over a long period of time.

Tonal effects

• Finer texture and more stable reproduction of the smallest details (overtones, spatial fractions, fading processes)
• Richer, differentiated timbres with a clear outline — colorful but ordered
• Quieter, more “mature” overall impression: less nervousness, high long-term suitability
• Noticeably more heart, rhythm and joy of playing with insight and precision

Vacuum Oil Impregnation

Vacuum oil impregnation involves displacing air from the coil and drawing a special oil — whose dielectric and hydromechanical properties optimize the desired acoustic characteristics of the coil structure — into every pore under a vacuum. The oil wets film and paper surfaces, stabilizes the wrap from the inside and dampens extensive movements — macro microphony is reduced deep in the wrap structure. In this way, the capacitor remains mechanically quiet even with high pulses and dynamics and does not falsify the music signal through its own movements.

Tonal effects

• Reverb decays, fading processes and quiet room information are more prominent because the wrap inside is calmed down
• Even with high dynamics, the sound remains calm and orderly; loud passages do not drown out the quieter details
• Transients (blowing noises, string strokes, cymbal impulses) come precisely, completely and without sharpness
• Overall impression: relaxed, controlled and at the same time exceptionally detailed

Silver Metallization (Ag)

Silver metallization uses maximum conductivity and long free path lengths for electrons — fewer active microcontacts, less 1/f noise. Larger particle sizes and lower interference voltages at the grain boundaries result in particularly quiet micro-microphonic behavior, which transmits the smallest levels and high frequencies very finely and stably.

Tonal effects

• More insight: Details, overtones and room information are more clearly visible
• More stable stage and more precise positioning, especially in the tweeter/super tweeter
• Vocal, string and cymbal textures look finer and more complete
• Transients come faster without looking sharp or strained
• Embedded in a calm construction, the result is a transparent resolution with a calm, orderly background

The Supreme Wrapping Technology

A trump card in the world of Macro-Microphony and electrotechnical parameters

The Supreme wrapping technology sets up two coils with double target capacity and connects them in series internally. This increases mass and internal damping, distributes field forces across two structures and thus reduces macro microphonies very effectively. At the same time, the residual inductance drops to around a quarter of a comparable single coil — fast transients and impulses are transmitted cleanly and in a controlled manner.

Tonal effects

• Superior peace of mind even with very large amounts of energy — the condenser remains mechanically “silent”
• Attack, transients and rhythmic subtleties come quickly, precisely and without procrastination
• Microstructures (overtone trajectories, quiet space, fine movements) are clearly audible without having a clinical effect
• Large, relaxed stage with high fine-detail resolution — like a very good concert hall seat

Aluminum metallization (100% aluminum instead of zinc-aluminum mixture)

Pure aluminum metallization replaces the zinc-aluminum mixture commonly used in industry with a homogeneous metal structure. This reduces interface effects at the grain boundaries , stabilizes the conductivity across the electrode surface and results in a significantly quieter noise spectrum. For example, the basic design of an MCap is audibly different from typical industrial capacitors.

Tonal Effects

• Darker, quieter background — subtle artifacts recede
• Clearer, clearer stage without rough-metallic side effects
• Quiet, well-defined overall sound — a real introduction to audiophile quality

Silver – Gold Metallization (Ag – Au)

The Silver-Gold Metallization combines the maximum conductivity of silver with the interfacial stability of gold. Silver provides precise, finely resolved signal routing with very low noise; gold stabilizes grain boundaries, slows down diffusion and smooths the microspectrum — particularly with small signals and over a long period of time.

Tonal effects

• Finer texture and more stable reproduction of the smallest details (overtones, spatial fractions, fading processes)
• Richer, differentiated timbres with a clear outline — colorful but ordered
• Quieter, more “mature” overall impression: less nervousness, high long-term suitability
• Noticeably more heart, rhythm and joy of playing with insight and precision

Vacuum Oil Impregnation

Vacuum oil impregnation involves displacing air from the coil and drawing a special oil — whose dielectric and hydromechanical properties optimize the desired acoustic characteristics of the coil structure — into every pore under a vacuum. The oil wets film and paper surfaces, stabilizes the wrap from the inside and dampens extensive movements — macro microphony is reduced deep in the wrap structure. In this way, the capacitor remains mechanically quiet even with high pulses and dynamics and does not falsify the music signal through its own movements.

Tonal effects

• Reverb decays, fading processes and quiet room information are more prominent because the wrap inside is calmed down
• Even with high dynamics, the sound remains calm and orderly; loud passages do not drown out the quieter details
• Transients (blowing noises, string strokes, cymbal impulses) come precisely, completely and without sharpness
• Overall impression: relaxed, controlled and at the same time exceptionally detailed

Silver Metallization (Ag)

Silver metallization uses maximum conductivity and long free path lengths for electrons — fewer active microcontacts, less 1/f noise. Larger particle sizes and lower interference voltages at the grain boundaries result in particularly quiet micro-microphonic behavior, which transmits the smallest levels and high frequencies very finely and stably.

Tonal effects

• More insight: Details, overtones and room information are more clearly visible
• More stable stage and more precise positioning, especially in the tweeter/super tweeter
• Vocal, string and cymbal textures look finer and more complete
• Transients come faster without looking sharp or strained
• Embedded in a calm construction, the result is a transparent resolution with a calm, orderly background

The Supreme Wrapping Technology

A trump card in the world of Macro-Microphony and electrotechnical parameters

The Supreme wrapping technology sets up two coils with double target capacity and connects them in series internally. This increases mass and internal damping, distributes field forces across two structures and thus reduces macro microphonies very effectively. At the same time, the residual inductance drops to around a quarter of a comparable single coil — fast transients and impulses are transmitted cleanly and in a controlled manner.

Tonal effects

• Superior peace of mind even with very large amounts of energy — the condenser remains mechanically “silent”
• Attack, transients and rhythmic subtleties come quickly, precisely and without procrastination
• Microstructures (overtone trajectories, quiet space, fine movements) are clearly audible without having a clinical effect
• Large, relaxed stage with high fine-detail resolution — like a very good concert hall seat

Aluminum metallization (100% aluminum instead of zinc-aluminum mixture)

Pure aluminum metallization replaces the zinc-aluminum mixture commonly used in industry with a homogeneous metal structure. This reduces interface effects at the grain boundaries , stabilizes the conductivity across the electrode surface and results in a significantly quieter noise spectrum. For example, the basic design of an MCap is audibly different from typical industrial capacitors.

Tonal Effects

• Darker, quieter background — subtle artifacts recede
• Clearer, clearer stage without rough-metallic side effects
• Quiet, well-defined overall sound — a real introduction to audiophile quality

Silver – Gold Metallization (Ag – Au)

The Silver-Gold Metallization combines the maximum conductivity of silver with the interfacial stability of gold. Silver provides precise, finely resolved signal routing with very low noise; gold stabilizes grain boundaries, slows down diffusion and smooths the microspectrum — particularly with small signals and over a long period of time.

Tonal effects

• Finer texture and more stable reproduction of the smallest details (overtones, spatial fractions, fading processes)
• Richer, differentiated timbres with a clear outline — colorful but ordered
• Quieter, more “mature” overall impression: less nervousness, high long-term suitability
• Noticeably more heart, rhythm and joy of playing with insight and precision

Vacuum Oil Impregnation

Vacuum oil impregnation involves displacing air from the coil and drawing a special oil — whose dielectric and hydromechanical properties optimize the desired acoustic characteristics of the coil structure — into every pore under a vacuum. The oil wets film and paper surfaces, stabilizes the wrap from the inside and dampens extensive movements — macro microphony is reduced deep in the wrap structure. In this way, the capacitor remains mechanically quiet even with high pulses and dynamics and does not falsify the music signal through its own movements.

Tonal effects

• Reverb decays, fading processes and quiet room information are more prominent because the wrap inside is calmed down
• Even with high dynamics, the sound remains calm and orderly; loud passages do not drown out the quieter details
• Transients (blowing noises, string strokes, cymbal impulses) come precisely, completely and without sharpness
• Overall impression: relaxed, controlled and at the same time exceptionally detailed

Silver Metallization (Ag)

Silver metallization uses maximum conductivity and long free path lengths for electrons — fewer active microcontacts, less 1/f noise. Larger particle sizes and lower interference voltages at the grain boundaries result in particularly quiet micro-microphonic behavior, which transmits the smallest levels and high frequencies very finely and stably.

Tonal effects

• More insight: Details, overtones and room information are more clearly visible
• More stable stage and more precise positioning, especially in the tweeter/super tweeter
• Vocal, string and cymbal textures look finer and more complete
• Transients come faster without looking sharp or strained
• Embedded in a calm construction, the result is a transparent resolution with a calm, orderly background

The Supreme Wrapping Technology

A trump card in the world of Macro-Microphony and electrotechnical parameters

The Supreme wrapping technology sets up two coils with double target capacity and connects them in series internally. This increases mass and internal damping, distributes field forces across two structures and thus reduces macro microphonies very effectively. At the same time, the residual inductance drops to around a quarter of a comparable single coil — fast transients and impulses are transmitted cleanly and in a controlled manner.

Tonal effects

• Superior peace of mind even with very large amounts of energy — the condenser remains mechanically “silent”
• Attack, transients and rhythmic subtleties come quickly, precisely and without procrastination
• Microstructures (overtone trajectories, quiet space, fine movements) are clearly audible without having a clinical effect
• Large, relaxed stage with high fine-detail resolution — like a very good concert hall seat

Aluminum metallization (100% aluminum instead of zinc-aluminum mixture)

Pure aluminum metallization replaces the zinc-aluminum mixture commonly used in industry with a homogeneous metal structure. This reduces interface effects at the grain boundaries , stabilizes the conductivity across the electrode surface and results in a significantly quieter noise spectrum. For example, the basic design of an MCap is audibly different from typical industrial capacitors.

Tonal Effects

• Darker, quieter background — subtle artifacts recede
• Clearer, clearer stage without rough-metallic side effects
• Quiet, well-defined overall sound — a real introduction to audiophile quality

Silver – Gold Metallization (Ag – Au)

The Silver-Gold Metallization combines the maximum conductivity of silver with the interfacial stability of gold. Silver provides precise, finely resolved signal routing with very low noise; gold stabilizes grain boundaries, slows down diffusion and smooths the microspectrum — particularly with small signals and over a long period of time.

Tonal effects

• Finer texture and more stable reproduction of the smallest details (overtones, spatial fractions, fading processes)
• Richer, differentiated timbres with a clear outline — colorful but ordered
• Quieter, more “mature” overall impression: less nervousness, high long-term suitability
• Noticeably more heart, rhythm and joy of playing with insight and precision

Vacuum Oil Impregnation

Vacuum oil impregnation involves displacing air from the coil and drawing a special oil — whose dielectric and hydromechanical properties optimize the desired acoustic characteristics of the coil structure — into every pore under a vacuum. The oil wets film and paper surfaces, stabilizes the wrap from the inside and dampens extensive movements — macro microphony is reduced deep in the wrap structure. In this way, the capacitor remains mechanically quiet even with high pulses and dynamics and does not falsify the music signal through its own movements.

Tonal effects

• Reverb decays, fading processes and quiet room information are more prominent because the wrap inside is calmed down
• Even with high dynamics, the sound remains calm and orderly; loud passages do not drown out the quieter details
• Transients (blowing noises, string strokes, cymbal impulses) come precisely, completely and without sharpness
• Overall impression: relaxed, controlled and at the same time exceptionally detailed

Silver Metallization (Ag)

Silver metallization uses maximum conductivity and long free path lengths for electrons — fewer active microcontacts, less 1/f noise. Larger particle sizes and lower interference voltages at the grain boundaries result in particularly quiet micro-microphonic behavior, which transmits the smallest levels and high frequencies very finely and stably.

Tonal effects

• More insight: Details, overtones and room information are more clearly visible
• More stable stage and more precise positioning, especially in the tweeter/super tweeter
• Vocal, string and cymbal textures look finer and more complete
• Transients come faster without looking sharp or strained
• Embedded in a calm construction, the result is a transparent resolution with a calm, orderly background

The Supreme Wrapping Technology

A trump card in the world of Macro-Microphony and electrotechnical parameters

The Supreme wrapping technology sets up two coils with double target capacity and connects them in series internally. This increases mass and internal damping, distributes field forces across two structures and thus reduces macro microphonies very effectively. At the same time, the residual inductance drops to around a quarter of a comparable single coil — fast transients and impulses are transmitted cleanly and in a controlled manner.

Tonal effects

• Superior peace of mind even with very large amounts of energy — the condenser remains mechanically “silent”
• Attack, transients and rhythmic subtleties come quickly, precisely and without procrastination
• Microstructures (overtone trajectories, quiet space, fine movements) are clearly audible without having a clinical effect
• Large, relaxed stage with high fine-detail resolution — like a very good concert hall seat

Aluminum metallization (100% aluminum instead of zinc-aluminum mixture)

Pure aluminum metallization replaces the zinc-aluminum mixture commonly used in industry with a homogeneous metal structure. This reduces interface effects at the grain boundaries , stabilizes the conductivity across the electrode surface and results in a significantly quieter noise spectrum. For example, the basic design of an MCap is audibly different from typical industrial capacitors.

Tonal Effects

• Darker, quieter background — subtle artifacts recede
• Clearer, clearer stage without rough-metallic side effects
• Quiet, well-defined overall sound — a real introduction to audiophile quality

Silver – Gold Metallization (Ag – Au)

The Silver-Gold Metallization combines the maximum conductivity of silver with the interfacial stability of gold. Silver provides precise, finely resolved signal routing with very low noise; gold stabilizes grain boundaries, slows down diffusion and smooths the microspectrum — particularly with small signals and over a long period of time.

Tonal effects

• Finer texture and more stable reproduction of the smallest details (overtones, spatial fractions, fading processes)
• Richer, differentiated timbres with a clear outline — colorful but ordered
• Quieter, more “mature” overall impression: less nervousness, high long-term suitability
• Noticeably more heart, rhythm and joy of playing with insight and precision

Vacuum Oil Impregnation

Vacuum oil impregnation involves displacing air from the coil and drawing a special oil — whose dielectric and hydromechanical properties optimize the desired acoustic characteristics of the coil structure — into every pore under a vacuum. The oil wets film and paper surfaces, stabilizes the wrap from the inside and dampens extensive movements — macro microphony is reduced deep in the wrap structure. In this way, the capacitor remains mechanically quiet even with high pulses and dynamics and does not falsify the music signal through its own movements.

Tonal effects

• Reverb decays, fading processes and quiet room information are more prominent because the wrap inside is calmed down
• Even with high dynamics, the sound remains calm and orderly; loud passages do not drown out the quieter details
• Transients (blowing noises, string strokes, cymbal impulses) come precisely, completely and without sharpness
• Overall impression: relaxed, controlled and at the same time exceptionally detailed

Silver Metallization (Ag)

Silver metallization uses maximum conductivity and long free path lengths for electrons — fewer active microcontacts, less 1/f noise. Larger particle sizes and lower interference voltages at the grain boundaries result in particularly quiet micro-microphonic behavior, which transmits the smallest levels and high frequencies very finely and stably.

Tonal effects

• More insight: Details, overtones and room information are more clearly visible
• More stable stage and more precise positioning, especially in the tweeter/super tweeter
• Vocal, string and cymbal textures look finer and more complete
• Transients come faster without looking sharp or strained
• Embedded in a calm construction, the result is a transparent resolution with a calm, orderly background

The Supreme Wrapping Technology

A trump card in the world of Macro-Microphony and electrotechnical parameters

The Supreme wrapping technology sets up two coils with double target capacity and connects them in series internally. This increases mass and internal damping, distributes field forces across two structures and thus reduces macro microphonies very effectively. At the same time, the residual inductance drops to around a quarter of a comparable single coil — fast transients and impulses are transmitted cleanly and in a controlled manner.

Tonal effects

• Superior peace of mind even with very large amounts of energy — the condenser remains mechanically “silent”
• Attack, transients and rhythmic subtleties come quickly, precisely and without procrastination
• Microstructures (overtone trajectories, quiet space, fine movements) are clearly audible without having a clinical effect
• Large, relaxed stage with high fine-detail resolution — like a very good concert hall seat

Aluminum metallization (100% aluminum instead of zinc-aluminum mixture)

Pure aluminum metallization replaces the zinc-aluminum mixture commonly used in industry with a homogeneous metal structure. This reduces interface effects at the grain boundaries , stabilizes the conductivity across the electrode surface and results in a significantly quieter noise spectrum. For example, the basic design of an MCap is audibly different from typical industrial capacitors.

Tonal Effects

• Darker, quieter background — subtle artifacts recede
• Clearer, clearer stage without rough-metallic side effects
• Quiet, well-defined overall sound — a real introduction to audiophile quality

Silver – Gold Metallization (Ag – Au)

The Silver-Gold Metallization combines the maximum conductivity of silver with the interfacial stability of gold. Silver provides precise, finely resolved signal routing with very low noise; gold stabilizes grain boundaries, slows down diffusion and smooths the microspectrum — particularly with small signals and over a long period of time.

Tonal effects

• Finer texture and more stable reproduction of the smallest details (overtones, spatial fractions, fading processes)
• Richer, differentiated timbres with a clear outline — colorful but ordered
• Quieter, more “mature” overall impression: less nervousness, high long-term suitability
• Noticeably more heart, rhythm and joy of playing with insight and precision

Vacuum Oil Impregnation

Vacuum oil impregnation involves displacing air from the coil and drawing a special oil — whose dielectric and hydromechanical properties optimize the desired acoustic characteristics of the coil structure — into every pore under a vacuum. The oil wets film and paper surfaces, stabilizes the wrap from the inside and dampens extensive movements — macro microphony is reduced deep in the wrap structure. In this way, the capacitor remains mechanically quiet even with high pulses and dynamics and does not falsify the music signal through its own movements.

Tonal effects

• Reverb decays, fading processes and quiet room information are more prominent because the wrap inside is calmed down
• Even with high dynamics, the sound remains calm and orderly; loud passages do not drown out the quieter details
• Transients (blowing noises, string strokes, cymbal impulses) come precisely, completely and without sharpness
• Overall impression: relaxed, controlled and at the same time exceptionally detailed

Silver Metallization (Ag)

Silver metallization uses maximum conductivity and long free path lengths for electrons — fewer active microcontacts, less 1/f noise. Larger particle sizes and lower interference voltages at the grain boundaries result in particularly quiet micro-microphonic behavior, which transmits the smallest levels and high frequencies very finely and stably.

Tonal effects

• More insight: Details, overtones and room information are more clearly visible
• More stable stage and more precise positioning, especially in the tweeter/super tweeter
• Vocal, string and cymbal textures look finer and more complete
• Transients come faster without looking sharp or strained
• Embedded in a calm construction, the result is a transparent resolution with a calm, orderly background

The Supreme Wrapping Technology

A trump card in the world of Macro-Microphony and electrotechnical parameters

The Supreme wrapping technology sets up two coils with double target capacity and connects them in series internally. This increases mass and internal damping, distributes field forces across two structures and thus reduces macro microphonies very effectively. At the same time, the residual inductance drops to around a quarter of a comparable single coil — fast transients and impulses are transmitted cleanly and in a controlled manner.

Tonal effects

• Superior peace of mind even with very large amounts of energy — the condenser remains mechanically “silent”
• Attack, transients and rhythmic subtleties come quickly, precisely and without procrastination
• Microstructures (overtone trajectories, quiet space, fine movements) are clearly audible without having a clinical effect
• Large, relaxed stage with high fine-detail resolution — like a very good concert hall seat