Capacitors
/
Power Capacitors
/
TubeCap MKP-Film
Mundorf TubeCap MKP-Film TCAP 30 µF 600/88 VDC/VAC capacitor
TCAP

TCAP-30T5.600

TubeCap combines the time response – the "speed" – of a film capacitor with high voltage withstand capability – in a compact design.

Product consulting

Technologies

Aluminium Metallization

Reduces charge carrier dispersion at grain boundaries in the metal, reduces sound roughness, calms the noise spectrum.

Aluminum metallization (100% aluminum instead of zinc-aluminum mixture)

Pure aluminum metallization replaces the zinc-aluminum mixture commonly used in industry with a homogeneous metal structure. This reduces interface effects at the grain boundaries , stabilizes the conductivity across the electrode surface and results in a significantly quieter noise spectrum. For example, the basic design of an MCap is audibly different from typical industrial capacitors.

Tonal Effects

  • Darker, quieter background — subtle artifacts recede
  • Clearer, clearer stage without rough-metallic side effects
  • Quiet, well-defined overall sound — a real introduction to audiophile quality

Learn more
Non-magnetic connectors

No magnetism in the signal path. No hidden side effects

Non-Magnetic Connections

Non-magnetic connections minimize micro-microphone modulations in the current path. In a power supply capacitor, the current flows not only through the coil, but also through the connecting wires and contact points — and this is exactly where ferromagnetic materials can produce undesired effects. Non-magnetic connection materials avoid magnetization and hysteresis in the conductor and thus reduce current-synchronous, very fine impedance modulations. This is a micro-microphonic measure in the actual power path: The connection is closer to the ideal conductor, without “magnetic interference.” In addition, there is additional electrotechnical benefit because non-magnetic, highly conductive materials often lower and stabilize contact and transition resistances. As a result, energy is available more evenly at the amplifier stage — and the sound remains quieter and more controlled.

Tonal effects

  • quieter background and less “grit” with complex music
  • more stable transients because the current path is less finely modulated
  • clearer contours and cleaner room images at high levels
  • more consistent sound quality due to more stable contact and conduction conditions

Learn more

Technical data

Article number
TCAP-30T5.600
Voltage rating
600/88 VDC/VAC
Dimensions
L35xH55xZ30 mm
Connections
Ø1.00xL5 mm
Temperature range
-25°C/-13°F...+85°C/+185°F
Conductor material
Aluminium
Winding technique
TubeCap (MKP)
Downloads
No items found.

Similar configurations

1 VARIANTS

Sort by
No products are available that match the current filters.
Reset filters

Similar products

Mundorf TubeCap MKP-Film TCAP 20 µF 750/260 VDC/VAC capacitor
TCAP-20T5.750
Aluminium Metallization

Aluminum metallization (100% aluminum instead of zinc-aluminum mixture)

Pure aluminum metallization replaces the zinc-aluminum mixture commonly used in industry with a homogeneous metal structure. This reduces interface effects at the grain boundaries , stabilizes the conductivity across the electrode surface and results in a significantly quieter noise spectrum. For example, the basic design of an MCap is audibly different from typical industrial capacitors.

Tonal Effects

  • Darker, quieter background — subtle artifacts recede
  • Clearer, clearer stage without rough-metallic side effects
  • Quiet, well-defined overall sound — a real introduction to audiophile quality

Learn more
Non-magnetic connectors

Non-Magnetic Connections

Non-magnetic connections minimize micro-microphone modulations in the current path. In a power supply capacitor, the current flows not only through the coil, but also through the connecting wires and contact points — and this is exactly where ferromagnetic materials can produce undesired effects. Non-magnetic connection materials avoid magnetization and hysteresis in the conductor and thus reduce current-synchronous, very fine impedance modulations. This is a micro-microphonic measure in the actual power path: The connection is closer to the ideal conductor, without “magnetic interference.” In addition, there is additional electrotechnical benefit because non-magnetic, highly conductive materials often lower and stabilize contact and transition resistances. As a result, energy is available more evenly at the amplifier stage — and the sound remains quieter and more controlled.

Tonal effects

  • quieter background and less “grit” with complex music
  • more stable transients because the current path is less finely modulated
  • clearer contours and cleaner room images at high levels
  • more consistent sound quality due to more stable contact and conduction conditions

Learn more
Mundorf TubeCap MKP-Film TCAP 47 µF 600/100 VDC/VAC capacitor
TCAP-47T5.600
Aluminium Metallization

Aluminum metallization (100% aluminum instead of zinc-aluminum mixture)

Pure aluminum metallization replaces the zinc-aluminum mixture commonly used in industry with a homogeneous metal structure. This reduces interface effects at the grain boundaries , stabilizes the conductivity across the electrode surface and results in a significantly quieter noise spectrum. For example, the basic design of an MCap is audibly different from typical industrial capacitors.

Tonal Effects

  • Darker, quieter background — subtle artifacts recede
  • Clearer, clearer stage without rough-metallic side effects
  • Quiet, well-defined overall sound — a real introduction to audiophile quality

Learn more
Non-magnetic connectors

Non-Magnetic Connections

Non-magnetic connections minimize micro-microphone modulations in the current path. In a power supply capacitor, the current flows not only through the coil, but also through the connecting wires and contact points — and this is exactly where ferromagnetic materials can produce undesired effects. Non-magnetic connection materials avoid magnetization and hysteresis in the conductor and thus reduce current-synchronous, very fine impedance modulations. This is a micro-microphonic measure in the actual power path: The connection is closer to the ideal conductor, without “magnetic interference.” In addition, there is additional electrotechnical benefit because non-magnetic, highly conductive materials often lower and stabilize contact and transition resistances. As a result, energy is available more evenly at the amplifier stage — and the sound remains quieter and more controlled.

Tonal effects

  • quieter background and less “grit” with complex music
  • more stable transients because the current path is less finely modulated
  • clearer contours and cleaner room images at high levels
  • more consistent sound quality due to more stable contact and conduction conditions

Learn more

Contact

Thank you! We have received your request and will get back to you shortly.

Oops! Something went wrong while submitting. Please try again.

Sample request

Customer info

Contact

Next

Project info

Message

← Back

Thank you! We have received your sample request and will get back to you shortly.

Oops! Something went wrong while submitting. Please try again.

Dealer search

Sample orders are currently available to business customers only. If you have any questions about our products, you can reach us at any time by email at info@mundorf.com or by phone on +49 221 977705 - 0.

Find a dealer

A.O.S. Audio Systeme

Schaidhaufweg 3,
82405 Wessobrunn

Tel. +49 8809 656

www.aos-lautsprecher.de

Achenbach Akustic

Mühlweg 11,
55278 Friesenheim

Tel. +49 6737 809729

www.lsv-achenbach.de

Acoustic Lab

Flothender Str. 8,
41334 Nettetal

Tel. +49 2153 912420

www.acoustic-lab.de

Art & Voice Medien GmbH

Davenstedter Str. 111,
30453 Hannover

Tel. +49 511 441046

www.highend-hifi-shop.de

Art of Sound

Ludwigstr. 61,
66115 Saarbrücken

Tel. +49 681 499329

www.eckhorn.com

ASE Lommersum

Lerchenstr. 9,
72336 Balingen

Tel. +49 7433 9974033

www.vifa.de