Wires & Stranded Wires
/
MConnect ACW Angelique Copper SolidCore
/
ACW Bare
Mundorf ACW Bare 1.5 mm wire
Mundorf MCap Classic 250 V capacitor, lying
Mundorf MCap EVO Aluminium Oil capacitor
Mundorf MCap Supreme capacitor with gold-plated leads

ACW Bare 1.5 mm

Solid Angelique copper conductor – for harmonious timbres, tonal coherence, and defined signal transmission.

Product consulting

1 VARIANTS

Sort by
This is some text inside of a div block.
This is some text inside of a div block.
This is some text inside of a div block.
This is some text inside of a div block.
Article number
ACW115-00.400
Conductor diameter
1.5 mm
Conductor cross-section
1.7671 mm²
Specific weight (g/m)
15.90 g/m
DC resistance
9.67 mΩ/m
This is some text inside of a div block.
This is some text inside of a div block.
This is some text inside of a div block.
This is some text inside of a div block.
Article number
ACW115-00.120
Conductor diameter
1.5 mm
Conductor cross-section
1.7671 mm²
Specific weight (g/m)
15.90 g/m
DC resistance
9.67 mΩ/m
This is some text inside of a div block.
This is some text inside of a div block.
This is some text inside of a div block.
This is some text inside of a div block.
Article number
ACW115-00.012
Conductor diameter
1.5 mm
Conductor cross-section
1.7671 mm²
Specific weight (g/m)
15.90 g/m
DC resistance
9.67 mΩ/m
This is some text inside of a div block.
This is some text inside of a div block.
This is some text inside of a div block.
This is some text inside of a div block.
Article number
ACW115-00.400
Conductor diameter
1.5 mm
Conductor cross-section
1.7671 mm²
Specific weight (g/m)
15.90 g/m
DC resistance
9.67 mΩ/m
This is some text inside of a div block.
This is some text inside of a div block.
This is some text inside of a div block.
This is some text inside of a div block.
Article number
ACW115-00.120
Conductor diameter
1.5 mm
Conductor cross-section
1.7671 mm²
Specific weight (g/m)
15.90 g/m
DC resistance
9.67 mΩ/m
This is some text inside of a div block.
This is some text inside of a div block.
This is some text inside of a div block.
This is some text inside of a div block.
Article number
ACW115-00.012
Conductor diameter
1.5 mm
Conductor cross-section
1.7671 mm²
Specific weight (g/m)
15.90 g/m
DC resistance
9.67 mΩ/m
No products are available that match the current filters.
Reset filters
Downloads
No items found.

Similar products

Mundorf MConnect ACW Blank 3.1416 mm² Angelique® Copper wire ACW120-00.080
ACW120-00.080
Non-magnetic connectors

Non-Magnetic Connections

Non-magnetic connections minimize micro-microphone modulations in the current path. In a power supply capacitor, the current flows not only through the coil, but also through the connecting wires and contact points — and this is exactly where ferromagnetic materials can produce undesired effects. Non-magnetic connection materials avoid magnetization and hysteresis in the conductor and thus reduce current-synchronous, very fine impedance modulations. This is a micro-microphonic measure in the actual power path: The connection is closer to the ideal conductor, without “magnetic interference.” In addition, there is additional electrotechnical benefit because non-magnetic, highly conductive materials often lower and stabilize contact and transition resistances. As a result, energy is available more evenly at the amplifier stage — and the sound remains quieter and more controlled.

Tonal effects

  • quieter background and less “grit” with complex music
  • more stable transients because the current path is less finely modulated
  • clearer contours and cleaner room images at high levels
  • more consistent sound quality due to more stable contact and conduction conditions

Learn more
Mundorf MConnect ACW Blank 3.1416 mm² Angelique® Copper wire ACW120-00.012
ACW120-00.012
Non-magnetic connectors

Non-Magnetic Connections

Non-magnetic connections minimize micro-microphone modulations in the current path. In a power supply capacitor, the current flows not only through the coil, but also through the connecting wires and contact points — and this is exactly where ferromagnetic materials can produce undesired effects. Non-magnetic connection materials avoid magnetization and hysteresis in the conductor and thus reduce current-synchronous, very fine impedance modulations. This is a micro-microphonic measure in the actual power path: The connection is closer to the ideal conductor, without “magnetic interference.” In addition, there is additional electrotechnical benefit because non-magnetic, highly conductive materials often lower and stabilize contact and transition resistances. As a result, energy is available more evenly at the amplifier stage — and the sound remains quieter and more controlled.

Tonal effects

  • quieter background and less “grit” with complex music
  • more stable transients because the current path is less finely modulated
  • clearer contours and cleaner room images at high levels
  • more consistent sound quality due to more stable contact and conduction conditions

Learn more
Mundorf MConnect ACW Blank 0.7854 mm² Angelique® Copper wire ACW110-01.000
ACW110-01.000
Non-magnetic connectors

Non-Magnetic Connections

Non-magnetic connections minimize micro-microphone modulations in the current path. In a power supply capacitor, the current flows not only through the coil, but also through the connecting wires and contact points — and this is exactly where ferromagnetic materials can produce undesired effects. Non-magnetic connection materials avoid magnetization and hysteresis in the conductor and thus reduce current-synchronous, very fine impedance modulations. This is a micro-microphonic measure in the actual power path: The connection is closer to the ideal conductor, without “magnetic interference.” In addition, there is additional electrotechnical benefit because non-magnetic, highly conductive materials often lower and stabilize contact and transition resistances. As a result, energy is available more evenly at the amplifier stage — and the sound remains quieter and more controlled.

Tonal effects

  • quieter background and less “grit” with complex music
  • more stable transients because the current path is less finely modulated
  • clearer contours and cleaner room images at high levels
  • more consistent sound quality due to more stable contact and conduction conditions

Learn more
Mundorf MConnect ACW Blank 0.7854 mm² Angelique® Copper wire ACW110-00.300
ACW110-00.300
Non-magnetic connectors

Non-Magnetic Connections

Non-magnetic connections minimize micro-microphone modulations in the current path. In a power supply capacitor, the current flows not only through the coil, but also through the connecting wires and contact points — and this is exactly where ferromagnetic materials can produce undesired effects. Non-magnetic connection materials avoid magnetization and hysteresis in the conductor and thus reduce current-synchronous, very fine impedance modulations. This is a micro-microphonic measure in the actual power path: The connection is closer to the ideal conductor, without “magnetic interference.” In addition, there is additional electrotechnical benefit because non-magnetic, highly conductive materials often lower and stabilize contact and transition resistances. As a result, energy is available more evenly at the amplifier stage — and the sound remains quieter and more controlled.

Tonal effects

  • quieter background and less “grit” with complex music
  • more stable transients because the current path is less finely modulated
  • clearer contours and cleaner room images at high levels
  • more consistent sound quality due to more stable contact and conduction conditions

Learn more
Mundorf MConnect ACW Blank 0.1963 mm² Angelique® Copper wire ACW105-03.000
ACW105-03.000
Non-magnetic connectors

Non-Magnetic Connections

Non-magnetic connections minimize micro-microphone modulations in the current path. In a power supply capacitor, the current flows not only through the coil, but also through the connecting wires and contact points — and this is exactly where ferromagnetic materials can produce undesired effects. Non-magnetic connection materials avoid magnetization and hysteresis in the conductor and thus reduce current-synchronous, very fine impedance modulations. This is a micro-microphonic measure in the actual power path: The connection is closer to the ideal conductor, without “magnetic interference.” In addition, there is additional electrotechnical benefit because non-magnetic, highly conductive materials often lower and stabilize contact and transition resistances. As a result, energy is available more evenly at the amplifier stage — and the sound remains quieter and more controlled.

Tonal effects

  • quieter background and less “grit” with complex music
  • more stable transients because the current path is less finely modulated
  • clearer contours and cleaner room images at high levels
  • more consistent sound quality due to more stable contact and conduction conditions

Learn more
Mundorf MConnect ACW Blank 0.7854 mm² Angelique® Copper wire ACW110-00.036
ACW110-00.036
Non-magnetic connectors

Non-Magnetic Connections

Non-magnetic connections minimize micro-microphone modulations in the current path. In a power supply capacitor, the current flows not only through the coil, but also through the connecting wires and contact points — and this is exactly where ferromagnetic materials can produce undesired effects. Non-magnetic connection materials avoid magnetization and hysteresis in the conductor and thus reduce current-synchronous, very fine impedance modulations. This is a micro-microphonic measure in the actual power path: The connection is closer to the ideal conductor, without “magnetic interference.” In addition, there is additional electrotechnical benefit because non-magnetic, highly conductive materials often lower and stabilize contact and transition resistances. As a result, energy is available more evenly at the amplifier stage — and the sound remains quieter and more controlled.

Tonal effects

  • quieter background and less “grit” with complex music
  • more stable transients because the current path is less finely modulated
  • clearer contours and cleaner room images at high levels
  • more consistent sound quality due to more stable contact and conduction conditions

Learn more
Mundorf MConnect ACW Blank 0.1963 mm² Angelique® Copper wire ACW105-00.120
ACW105-00.120
Non-magnetic connectors

Non-Magnetic Connections

Non-magnetic connections minimize micro-microphone modulations in the current path. In a power supply capacitor, the current flows not only through the coil, but also through the connecting wires and contact points — and this is exactly where ferromagnetic materials can produce undesired effects. Non-magnetic connection materials avoid magnetization and hysteresis in the conductor and thus reduce current-synchronous, very fine impedance modulations. This is a micro-microphonic measure in the actual power path: The connection is closer to the ideal conductor, without “magnetic interference.” In addition, there is additional electrotechnical benefit because non-magnetic, highly conductive materials often lower and stabilize contact and transition resistances. As a result, energy is available more evenly at the amplifier stage — and the sound remains quieter and more controlled.

Tonal effects

  • quieter background and less “grit” with complex music
  • more stable transients because the current path is less finely modulated
  • clearer contours and cleaner room images at high levels
  • more consistent sound quality due to more stable contact and conduction conditions

Learn more
Mundorf MConnect ACW Blank 0.1963 mm² Angelique® Copper wire ACW105-01.000
ACW105-01.000
Non-magnetic connectors

Non-Magnetic Connections

Non-magnetic connections minimize micro-microphone modulations in the current path. In a power supply capacitor, the current flows not only through the coil, but also through the connecting wires and contact points — and this is exactly where ferromagnetic materials can produce undesired effects. Non-magnetic connection materials avoid magnetization and hysteresis in the conductor and thus reduce current-synchronous, very fine impedance modulations. This is a micro-microphonic measure in the actual power path: The connection is closer to the ideal conductor, without “magnetic interference.” In addition, there is additional electrotechnical benefit because non-magnetic, highly conductive materials often lower and stabilize contact and transition resistances. As a result, energy is available more evenly at the amplifier stage — and the sound remains quieter and more controlled.

Tonal effects

  • quieter background and less “grit” with complex music
  • more stable transients because the current path is less finely modulated
  • clearer contours and cleaner room images at high levels
  • more consistent sound quality due to more stable contact and conduction conditions

Learn more
Mundorf MConnect ACW Blank 3.1416 mm² Angelique® Copper wire ACW120-00.250
ACW120-00.250
Non-magnetic connectors

Non-Magnetic Connections

Non-magnetic connections minimize micro-microphone modulations in the current path. In a power supply capacitor, the current flows not only through the coil, but also through the connecting wires and contact points — and this is exactly where ferromagnetic materials can produce undesired effects. Non-magnetic connection materials avoid magnetization and hysteresis in the conductor and thus reduce current-synchronous, very fine impedance modulations. This is a micro-microphonic measure in the actual power path: The connection is closer to the ideal conductor, without “magnetic interference.” In addition, there is additional electrotechnical benefit because non-magnetic, highly conductive materials often lower and stabilize contact and transition resistances. As a result, energy is available more evenly at the amplifier stage — and the sound remains quieter and more controlled.

Tonal effects

  • quieter background and less “grit” with complex music
  • more stable transients because the current path is less finely modulated
  • clearer contours and cleaner room images at high levels
  • more consistent sound quality due to more stable contact and conduction conditions

Learn more

Contact

Thank you! We have received your request and will get back to you shortly.

Oops! Something went wrong while submitting. Please try again.

Sample request

Customer info

Contact

Next

Project info

Message

← Back

Thank you! We have received your sample request and will get back to you shortly.

Oops! Something went wrong while submitting. Please try again.

Dealer search

Sample orders are currently available to business customers only. If you have any questions about our products, you can reach us at any time by email at info@mundorf.com or by phone on +49 221 977705 - 0.

Find a dealer

A.O.S. Audio Systeme

Schaidhaufweg 3,
82405 Wessobrunn

Tel. +49 8809 656

www.aos-lautsprecher.de

Achenbach Akustic

Mühlweg 11,
55278 Friesenheim

Tel. +49 6737 809729

www.lsv-achenbach.de

Acoustic Lab

Flothender Str. 8,
41334 Nettetal

Tel. +49 2153 912420

www.acoustic-lab.de

Art & Voice Medien GmbH

Davenstedter Str. 111,
30453 Hannover

Tel. +49 511 441046

www.highend-hifi-shop.de

Art of Sound

Ludwigstr. 61,
66115 Saarbrücken

Tel. +49 681 499329

www.eckhorn.com

ASE Lommersum

Lerchenstr. 9,
72336 Balingen

Tel. +49 7433 9974033

www.vifa.de